Linux version 2.4.20-pa35 (root@(none)) (gcc version 3.2.2) #1 Mon Jun 16
12:27:37 Local time zone must be set--see zic manu
FP[0] enabled: Rev 1 Model 16
The 64-bit Kernel has started...
Determining PDC firmware type: 64 bit PAT.
model 00005d60 00000491 00000000 00000001 424860f4 100000f0 00000008
000000b2 000000b2
vers  00000300
CPUID vers 17 rev 10 (0x0000022a)
capabilities 0x1
model 9000/800/A400-44
Total Memory: 1920 Mb
pagetable_init
On node 0 totalpages: 491520
zone(0): 491520 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/sda5 HOME=/ console=ttyS0 TERM=vt102
palo_kernel=2/vmlinux
Console: colour dummy device 160x64
Calibrating delay loop... 878.18 BogoMIPS
Memory: 1916284k available
Dentry cache hash table entries: 131072 (order: 9, 2097152 bytes)
Inode cache hash table entries: 131072 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 32768 (order: 7, 524288 bytes)
Buffer-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Page-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Searching for devices...
Found devices:
1. Crescendo DC- 440 (0) at 0xfffffffffffa0000 [160], versions 0x5d6, 0x0,
0x4
2. Astro BC Runway Port (12) at 0xfffffffffed00000 [0], versions 0x582,
0x0, 0xb
3. Elroy PCI Bridge (13) at 0xfffffffffed30000 [0/0], versions 0x782, 0x0,
0xa
4. Elroy PCI Bridge (13) at 0xfffffffffed34000 [0/2], versions 0x782, 0x0,
0xa
5. Elroy PCI Bridge (13) at 0xfffffffffed38000 [0/4], versions 0x782, 0x0,
0xa
6. Elroy PCI Bridge (13) at 0xfffffffffed3c000 [0/6], versions 0x782, 0x0,
0xa
7. Memory (1) at 0xfffffffffed08000 [8], versions 0x9b, 0x0, 0x9
CPU(s): 1 x PA8500 (PCX-W) at 440.000000 MHz
SBA found Astro 2.1 at 0xfffffffffed00000
lba version TR4.0 (0x5) found at 0xfffffffffed30000
lba range[2] : ignoring GMMIO (0xfffffff804000000)
lba version TR4.0 (0x5) found at 0xfffffffffed34000
lba range[2] : ignoring GMMIO (0xfffffff904000000)
lba version TR4.0 (0x5) found at 0xfffffffffed38000
lba range[2] : ignoring GMMIO (0xfffffffa04000000)
lba version TR4.0 (0x5) found at 0xfffffffffed3c000
lba range[2] : ignoring GMMIO (0xfffffffb04000000)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Soft power switch support not available.
Performance monitoring counters enabled for Crescendo DC- 440
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
SERIAL_PCI enabled
ttyS00 at iomem 0xfffffffff8000000 (irq = 132) is a 16550A
ttyS01 at iomem 0xfffffffff8000008 (irq = 132) is a 16550A
ttyS02 at iomem 0xfffffffff8000010 (irq = 132) is a 16550A
ttyS03 at iomem 0xfffffffff8006000 (irq = 133) is a 16550A
ttyS04 at iomem 0xfffffffff8006008 (irq = 133) is a 16550A
Generic RTC Driver v1.07
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
loop: loaded (max 8 devices)
Linux Tulip driver version 0.9.15-pre12 (Aug 9, 2002)
tulip0: no phy info, aborting mtable build
tulip0:  MII transceiver #1 config 1000 status 782d advertising 01e1.
eth0: Digital DS21143 Tulip rev 65 at 0x80, 00:30:6E:06:85:E7, IRQ 128.
SCSI subsystem driver Revision: 1.00
sym53c8xx: at PCI bus 0, device 2, function 0
sym53c8xx: 53c875 detected
sym53c8xx: at PCI bus 0, device 2, function 1
sym53c8xx: 53c875 detected
sym53c8xx: at PCI bus 0, device 1, function 0
sym53c8xx: setting PCI_COMMAND_INVALIDATE (fix-up)
sym53c8xx: 53c896 detected
sym53c8xx: at PCI bus 0, device 1, function 1
sym53c8xx: setting PCI_COMMAND_INVALIDATE (fix-up)
sym53c8xx: 53c896 detected
sym53c875-0: rev 0x14 on pci bus 0 device 2 function 0 irq 130
sym53c875-0: ID 7, Fast-10, Parity Checking
sym53c875-1: rev 0x14 on pci bus 0 device 2 function 1 irq 131
sym53c875-1: ID 7, Fast-20, Parity Checking
sym53c896-2: rev 0x7 on pci bus 0 device 1 function 0 irq 129
sym53c896-2: ID 7, Fast-20, Parity Checking
sym53c896-2: handling phase mismatch from SCRIPTS.
sym53c896-3: rev 0x7 on pci bus 0 device 1 function 1 irq 130
sym53c896-3: ID 7, Fast-20, Parity Checking
sym53c896-3: handling phase mismatch from SCRIPTS.
scsi0 : sym53c8xx-1.7.3c-20010512
scsi1 : sym53c8xx-1.7.3c-20010512
scsi2 : sym53c8xx-1.7.3c-20010512
scsi3 : sym53c8xx-1.7.3c-20010512
blk: queue 00000000130b3e28, I/O limit 4095Mb (mask 0xffffffff)
  Vendor: HP        Model: CD-Writer+ 9200   Rev: 1.0e
  Type:   CD-ROM                             ANSI SCSI revision: 04
blk: queue 0000000087ac4028, I/O limit 4095Mb (mask 0xffffffff)
  Vendor: SEAGATE   Model: ST318404LC        Rev: HP04
  Type:   Direct-Access                      ANSI SCSI revision: 03
blk: queue 0000000087ac4228, I/O limit 4095Mb (mask 0xffffffff)
  Vendor: SEAGATE   Model: ST318404LC        Rev: HP04
  Type:   Direct-Access                      ANSI SCSI revision: 03
blk: queue 0000000087ac4428, I/O limit 4095Mb (mask 0xffffffff)
Attached scsi disk sda at scsi1, channel 0, id 15, lun 0
Attached scsi disk sdb at scsi3, channel 0, id 15, lun 0
sym53c875-1-<15,*>: FAST-20 WIDE SCSI 40.0 MB/s (50.0 ns, offset 16)
SCSI device sda: 35566480 512-byte hdwr sectors (18210 MB)
Partition check:
 /dev/scsi/host1/bus0/target15/lun0: p1 p2 p3 p4 < p5 p6 p7 >
sym53c896-3-<15,*>: FAST-20 WIDE SCSI 40.0 MB/s (50.0 ns, offset 31)
SCSI device sdb: 35566480 512-byte hdwr sectors (18210 MB)
 /dev/scsi/host3/bus0/target15/lun0: p1 p2
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 4, lun 0
sym53c875-0-<4,*>: FAST-10 SCSI 10.0 MB/s (100.0 ns, offset 15)
sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
STI GSC/PCI graphics driver version 0.9
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 16384 buckets, 128Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 261k freed
Adding Swap: 1000440k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,5), internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,6), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,7), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,17), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,18), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
eth0: Setting full-duplex based on MII#1 link partner capability of 01e1.