[ 0.000000] Linux version 4.15.0-3-parisc64-smp (debian-kernel@lists.debian.org) (gcc version 7.3.0 (GCC)) #1 SMP Debian 4.15.17-1 (2018-04-19) [ 0.000000] unwind_init: start = 0x40f654e4, end = 0x40fc7004, entries = 25010 [ 0.000000] CPU0: thread -1, cpu 0, socket 0 [ 0.000000] FP[0] enabled: Rev 1 Model 16 [ 0.000000] The 64-bit Kernel has started... [ 0.000000] Kernel default page size is 4 KB. Huge pages enabled with 1 MB physical and 2 MB virtual size. [ 0.000000] bootconsole [ttyB0] enabled [ 0.000000] Initialized PDC Console for debugging. [ 0.000000] Determining PDC firmware type: 64 bit PAT. [ 0.000000] PAT: Running on cell 0 and location 1. [ 0.000000] model 00005cb0 00000491 00000000 00000001 5dcdd552 100000f0 00000008 000000b2 000000b2 [ 0.000000] random: fast init done [ 0.000000] vers 00000301 [ 0.000000] CPUID vers 17 rev 11 (0x0000022b) [ 0.000000] capabilities 0x1 [ 0.000000] model 9000/800/A500-44 [ 0.000000] Memory Ranges: [ 0.000000] 0) Start 0x0000000000000000 End 0x00000000efffffff Size 3840 MB [ 0.000000] 1) Start 0x00000010f0000000 End 0x00000010ffffffff Size 256 MB [ 0.000000] Total Memory: 4096 MB [ 0.000000] initrd: 7eaed000-7ffee55b [ 0.000000] initrd: reserving 3eaed000-3ffee55b (mem_max 100000000) [ 0.000000] PDT: type PDT_PAT_CELL, size 50, entries 0, status 0, dbe_loc 0xffffffffffffffff, good_mem 13 MB [ 0.000000] PDT: Firmware reports all memory OK. [ 0.000000] On node 0 totalpages: 983040 [ 0.000000] Normal zone: 15360 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 983040 pages, LIFO batch:31 [ 0.000000] On node 1 totalpages: 65536 [ 0.000000] Normal zone: 1024 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 65536 pages, LIFO batch:15 [ 0.000000] percpu: Embedded 27 pages/cpu @ (ptrval) s71648 r8192 d30752 u110592 [ 0.000000] pcpu-alloc: s71648 r8192 d30752 u110592 alloc=27*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 0.000000] SMP: bootstrap CPU ID is 0 [ 0.000000] Built 2 zonelists, mobility grouping on. Total pages: 1032192 [ 0.000000] Kernel command line: root=/dev/sda3 root2=/dev/sdb5 HOME=/ rootfstype=ext4 panic_timeout=60 panic=-1 console=ttyS0 TERM=vt102 palo_kernel=2/vmlinux [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 4073640K/4194304K available (10740K kernel code, 4086K rwdata, 1411K rodata, 1024K init, 844K bss, 120664K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=16, Order=0-3, MinObjects=0, CPUs=8, Nodes=8 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS: 128 [ 0.000019] sched_clock: 64 bits at 440MHz, resolution 2ns, wraps every 4398046511103ns [ 0.008328] Console: colour dummy device 160x64 [ 0.012142] Calibrating delay loop... 872.44 BogoMIPS (lpj=1744896) [ 0.040023] pid_max: default: 32768 minimum: 301 [ 0.049018] Security Framework initialized [ 0.052034] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.060232] AppArmor: AppArmor initialized [ 0.068714] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.076214] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.090084] Hierarchical SRCU implementation. [ 0.097200] smp: Bringing up secondary CPUs ... [ 0.100041] smp: Brought up 2 nodes, 1 CPU [ 0.112344] devtmpfs: initialized [ 0.120895] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.128107] futex hash table entries: 2048 (order: 4, 65536 bytes) [ 0.142584] NET: Registered protocol family 16 [ 0.144648] audit: initializing netlink subsys (disabled) [ 0.157795] EISA bus registered [ 0.160074] audit: type=2000 audit(1524301683.736:1): state=initialized audit_enabled=0 res=1 [ 0.172294] Searching for devices... [ 0.324026] Found devices: [ 0.326534] 1. Crescendo 440 at 0xfffffffffffa0000 [160] { 0, 0x0, 0x5cb, 0x00004 } [ 0.332040] 2. Crescendo 440 at 0xfffffffffffa2000 [162] { 0, 0x0, 0x5cb, 0x00004 } [ 0.344040] 3. Memory at 0xfffffffffed08000 [8] { 1, 0x0, 0x09b, 0x00009 } [ 0.352040] 4. Astro BC Runway Port at 0xfffffffffed00000 [0] { 12, 0x0, 0x582, 0x0000b } [ 0.364041] 5. Elroy PCI Bridge at 0xfffffffffed30000 [0/0] { 13, 0x0, 0x782, 0x0000a } [ 0.372035] Enabling PDC_PAT chassis codes support v0.05 [ 0.725408] Logical CPU #0 is physical cpu #0 at location 0x0 with hpa 0xfffffffffffa0000 [ 0.737417] Logical CPU #1 is physical cpu #1 at location 0x0 with hpa 0xfffffffffffa2000 [ 0.744042] CPU1: thread -1, cpu 0, socket 1 [ 0.753486] Releasing cpu 1 now, hpa=fffffffffffa2000 [ 0.772565] CPU(s): 2 out of 2 PA8500 (PCX-W) at 440.000000 MHz online [ 0.784956] Whole cache flush 208387 cycles, flushing 17825792 bytes 2439576 cycles [ 0.784975] Cache flush threshold set to 1024 KiB [ 0.796049] TLB flush threshold set to 320 KiB [ 0.816804] SBA found Astro 2.1 at 0xfffffffffed00000 [ 0.825832] Elroy version TR4.0 (0x5) found at 0xfffffffffed30000 [ 0.857375] LBA 0:0: PCI host bridge to bus 0000:00 [ 0.860101] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.868050] pci_bus 0000:00: root bus resource [mem 0xfffffffff8000000-0xfffffffff87fffff] (bus address [0xf8000000-0xf87fffff]) [ 0.880091] pci_bus 0000:00: root bus resource [bus 00-07] [ 0.892144] pci 0000:00:00.0: [1011:0019] type 00 class 0x020000 [ 0.892316] pci 0000:00:00.0: reg 0x10: [io 0x0000-0x007f] [ 0.892390] pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x000003ff] [ 0.892660] pci 0000:00:00.0: reg 0x30: [mem 0x8ffc0000-0x8fffffff pref] [ 0.893346] pci 0000:00:01.0: [1000:000b] type 00 class 0x010000 [ 0.893515] pci 0000:00:01.0: reg 0x10: [io 0x0000-0x00ff] [ 0.893627] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x000003ff 64bit] [ 0.893737] pci 0000:00:01.0: reg 0x1c: [mem 0x00000000-0x00001fff 64bit] [ 0.894105] pci 0000:00:01.0: supports D1 D2 [ 0.894599] pci 0000:00:01.1: [1000:000b] type 00 class 0x010000 [ 0.894784] pci 0000:00:01.1: reg 0x10: [io 0x0000-0x00ff] [ 0.894910] pci 0000:00:01.1: reg 0x14: [mem 0xfffffffff8020000-0xfffffffff80203ff 64bit] [ 0.895037] pci 0000:00:01.1: reg 0x1c: [mem 0xfffffffff8040000-0xfffffffff8041fff 64bit] [ 0.895433] pci 0000:00:01.1: supports D1 D2 [ 0.896178] pci 0000:00:02.0: [1000:000f] type 00 class 0x010000 [ 0.896325] pci 0000:00:02.0: reg 0x10: [io 0x0000-0x00ff] [ 0.896398] pci 0000:00:02.0: reg 0x14: [mem 0x00000000-0x000000ff] [ 0.896470] pci 0000:00:02.0: reg 0x18: [mem 0x00000000-0x00000fff] [ 0.897215] pci 0000:00:02.1: [1000:000f] type 00 class 0x010000 [ 0.897362] pci 0000:00:02.1: reg 0x10: [io 0x0000-0x00ff] [ 0.897434] pci 0000:00:02.1: reg 0x14: [mem 0x00000000-0x000000ff] [ 0.897506] pci 0000:00:02.1: reg 0x18: [mem 0x00000000-0x00000fff] [ 0.898328] pci 0000:00:04.0: [103c:1048] type 00 class 0x070002 [ 0.898492] pci 0000:00:04.0: reg 0x10: [mem 0xfffffffff8000000-0xfffffffff8000fff] [ 0.898580] pci 0000:00:04.0: reg 0x14: [io 0x0000-0x003f] [ 0.899472] pci 0000:00:05.0: [103c:1048] type 00 class 0x070002 [ 0.899620] pci 0000:00:05.0: reg 0x10: [mem 0x00000000-0x00000fff] [ 0.899693] pci 0000:00:05.0: reg 0x14: [io 0x0000-0x003f] [ 0.900868] pci 0000:00:00.0: can't claim BAR 6 [mem 0x8ffc0000-0x8fffffff pref]: no compatible bridge window [ 0.908331] pci 0000:00:00.0: BAR 6: assigned [mem 0xfffffffff8080000-0xfffffffff80bffff pref] [ 0.920059] pci 0000:00:01.0: BAR 3: assigned [mem 0xfffffffff8002000-0xfffffffff8003fff 64bit] [ 0.932115] pci 0000:00:02.0: BAR 2: assigned [mem 0xfffffffff8001000-0xfffffffff8001fff] [ 0.944067] pci 0000:00:02.1: BAR 2: assigned [mem 0xfffffffff8004000-0xfffffffff8004fff] [ 0.956067] pci 0000:00:05.0: BAR 0: assigned [mem 0xfffffffff8005000-0xfffffffff8005fff] [ 0.968067] pci 0000:00:00.0: BAR 1: assigned [mem 0xfffffffff8006000-0xfffffffff80063ff] [ 0.976074] pci 0000:00:01.0: BAR 1: assigned [mem 0xfffffffff8007000-0xfffffffff80073ff 64bit] [ 0.988111] pci 0000:00:01.0: BAR 0: assigned [io 0x0100-0x01ff] [ 0.996066] pci 0000:00:01.1: BAR 0: assigned [io 0x0200-0x02ff] [ 1.004066] pci 0000:00:02.0: BAR 0: assigned [io 0x0300-0x03ff] [ 1.012081] pci 0000:00:02.0: BAR 1: assigned [mem 0xfffffffff8008000-0xfffffffff80080ff] [ 1.024067] pci 0000:00:02.1: BAR 0: assigned [io 0x0400-0x04ff] [ 1.032067] pci 0000:00:02.1: BAR 1: assigned [mem 0xfffffffff8009000-0xfffffffff80090ff] [ 1.044066] pci 0000:00:00.0: BAR 0: assigned [io 0x0080-0x00ff] [ 1.052065] pci 0000:00:04.0: BAR 1: assigned [io 0x0040-0x007f] [ 1.060066] pci 0000:00:05.0: BAR 1: assigned [io 0x0500-0x053f] [ 1.072987] powersw: Soft power switch support not available. [ 1.092549] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 1.100945] vgaarb: loaded [ 1.254870] VFS: Disk quotas dquot_6.6.0 [ 1.256324] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.268847] AppArmor: AppArmor Filesystem Enabled [ 1.290955] NET: Registered protocol family 2 [ 1.296872] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 1.304817] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 1.314305] TCP: Hash tables configured (established 32768 bind 32768) [ 1.320788] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 1.328308] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 1.337197] NET: Registered protocol family 1 [ 1.344085] PCI: CLS 16 bytes [ 1.344948] Unpacking initramfs... [ 4.227129] Freeing initrd memory: 21508K [ 4.232436] clocksource: cr16_unstable: mask: 0xffffffffffffffff max_cycles: 0x657a3c2da0, max_idle_ns: 440795224593 ns [ 4.245012] Chassis warnings not supported. [ 4.252201] Performance monitoring counters enabled for Crescendo 440 [ 4.260861] Initialise system trusted keyrings [ 4.268262] workingset: timestamp_bits=43 max_order=20 bucket_order=0 [ 4.295674] zbud: loaded [ 26.792113] random: crng init done [ 52.724299] Key type asymmetric registered [ 52.728278] Asymmetric key parser 'x509' registered [ 52.736565] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 52.744373] io scheduler noop registered [ 52.752078] io scheduler deadline registered [ 52.756534] io scheduler cfq registered (default) [ 52.760037] io scheduler mq-deadline registered [ 52.773914] PDC Stable Storage facility v0.30 [ 53.252132] STI GSC/PCI core graphics driver Version 0.9b [ 53.260501] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 53.270226] serial 0000:00:04.0: enabling device (0146 -> 0147) [ 53.277708] console [ttyS0] disabled [ 53.300056] 0000:00:04.0: ttyS0 at MMIO 0xfffffffff8000000 (irq = 70, base_baud = 115200) is a 16550A [ 53.308102] console [ttyS0] enabled [ 53.320041] bootconsole [ttyB0] disabled [ 53.348064] 0000:00:04.0: ttyS1 at MMIO 0xfffffffff8000008 (irq = 70, base_baud = 115200) is a 16550A [ 53.380097] 0000:00:04.0: ttyS2 at MMIO 0xfffffffff8000010 (irq = 70, base_baud = 115200) is a 16550A [ 53.388615] serial 0000:00:05.0: enabling device (0000 -> 0003) [ 53.396078] serial 0000:00:05.0: enabling SERR and PARITY (0003 -> 0143) [ 53.428103] 0000:00:05.0: ttyS3 at MMIO 0xfffffffff8005000 (irq = 71, base_baud = 115200) is a 16550A [ 53.436603] serial 0000:00:05.0: Couldn't register serial port 0, irq 71, type 2, error -28 [ 53.448538] Linux agpgart interface v0.103 [ 53.456049] quicksilver: No Pluto found, so no AGPGART for you. [ 53.465133] mousedev: PS/2 mouse device common for all mice [ 53.475267] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0 [ 53.480335] ledtrig-cpu: registered to indicate activity on CPUs [ 53.493565] NET: Registered protocol family 10 [ 53.586245] Segment Routing with IPv6 [ 53.588293] mip6: Mobile IPv6 [ 53.592153] NET: Registered protocol family 17 [ 53.600076] mpls_gso: MPLS GSO support [ 53.605445] registered taskstats version 1 [ 53.612064] Loading compiled-in X.509 certificates [ 59.565246] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630' [ 59.572360] zswap: loaded using pool lzo/zbud [ 59.576449] AppArmor: AppArmor sha1 policy hashing enabled [ 59.584053] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 59.596146] rtc-generic rtc-generic: setting system clock to 2018-04-21 09:09:03 UTC (1524301743) [ 59.610875] Freeing unused kernel memory: 1024K [ 59.616029] Write protecting the kernel read-only data: 1411k [ 60.514393] tulip: Linux Tulip driver version 1.1.15-NAPI (Feb 27, 2007) [ 60.528352] tulip 0000:00:00.0: enabling device (0140 -> 0143) [ 60.544768] tulip0: no phy info, aborting mtable build [ 60.549226] tulip0: MII transceiver #1 config 1000 status 782d advertising 0061 [ 60.614306] net eth0: Digital DS21142/43 Tulip rev 65 at MMIO 0xfffffffff8006000, 00:30:6e:0c:6a:ea, IRQ 66 [ 60.625475] SCSI subsystem initialized [ 60.681856] sym53c8xx 0000:00:01.0: enabling device (0000 -> 0003) [ 60.684128] sym53c8xx 0000:00:01.0: enabling SERR and PARITY (0003 -> 0143) [ 60.744204] sym0: <896> rev 0x7 at pci 0000:00:01.0 irq 67 [ 60.758240] sym0: PA-RISC Firmware, ID 7, Fast-40, LVD, parity checking [ 60.768000] sym0: SCSI BUS has been reset. [ 60.772115] scsi host0: sym-2.2.3 [ 60.787859] sym53c8xx 0000:00:01.1: enabling device (0146 -> 0147) [ 60.840152] sym1: <896> rev 0x7 at pci 0000:00:01.1 irq 68 [ 60.859213] sym1: PA-RISC Firmware, ID 7, Fast-40, SE, parity checking [ 60.872000] sym1: SCSI BUS has been reset. [ 60.876100] sym1: SCSI BUS mode change from SE to SE. [ 60.880000] sym1: SCSI BUS has been reset. [ 60.892109] scsi host1: sym-2.2.3 [ 60.934431] sym53c8xx 0000:00:02.0: enabling device (0000 -> 0003) [ 60.940100] sym53c8xx 0000:00:02.0: enabling SERR and PARITY (0003 -> 0143) [ 61.004349] sym2: <875> rev 0x14 at pci 0000:00:02.0 irq 68 [ 61.096025] sym2: PA-RISC Firmware, ID 7, Fast-20, SE, parity checking [ 61.108000] sym2: SCSI BUS has been reset. [ 61.112063] scsi host2: sym-2.2.3 [ 61.124996] sym53c8xx 0000:00:02.1: enabling device (0000 -> 0003) [ 61.128064] sym53c8xx 0000:00:02.1: enabling SERR and PARITY (0003 -> 0143) [ 61.188163] sym3: <875> rev 0x14 at pci 0000:00:02.1 irq 69 [ 61.281452] sym3: PA-RISC Firmware, ID 7, Fast-20, SE, parity checking [ 61.288000] sym3: SCSI BUS has been reset. [ 61.296046] scsi host3: sym-2.2.3 [ 68.064168] scsi 1:0:15:0: Direct-Access HP 73.4G ST373405LC HP03 PQ: 0 ANSI: 2 [ 68.072129] scsi target1:0:15: tagged command queuing enabled, command queue depth 16. [ 68.104074] scsi target1:0:15: Beginning Domain Validation [ 68.128069] scsi target1:0:15: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 31) [ 68.144049] scsi target1:0:15: Domain Validation skipping write tests [ 68.148047] scsi target1:0:15: Ending Domain Validation [ 68.484099] scsi 3:0:15:0: Direct-Access HP 73.4G ST373405LC HP03 PQ: 0 ANSI: 2 [ 68.492122] scsi target3:0:15: tagged command queuing enabled, command queue depth 16. [ 68.524073] scsi target3:0:15: Beginning Domain Validation [ 68.548052] scsi target3:0:15: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 16) [ 68.564047] scsi target3:0:15: Domain Validation skipping write tests [ 68.568042] scsi target3:0:15: Ending Domain Validation [ 68.660179] sd 1:0:15:0: Power-on or device reset occurred [ 68.664293] sd 3:0:15:0: Power-on or device reset occurred [ 68.673911] sd 3:0:15:0: [sdb] 143374738 512-byte logical blocks: (73.4 GB/68.4 GiB) [ 68.673911] sd 1:0:15:0: [sda] 143374738 512-byte logical blocks: (73.4 GB/68.4 GiB) [ 68.676085] sd 1:0:15:0: [sda] Write Protect is off [ 68.676107] sd 1:0:15:0: [sda] Mode Sense: a3 00 10 08 [ 68.676166] sd 1:0:15:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 68.708433] sda: sda1 sda2 sda3 sda4 [ 68.716211] sd 3:0:15:0: [sdb] Write Protect is off [ 68.720170] sd 3:0:15:0: [sdb] Mode Sense: a3 00 10 08 [ 68.726238] sd 3:0:15:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 68.736132] sd 1:0:15:0: [sda] Attached SCSI disk [ 68.776093] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 > [ 68.792100] sd 3:0:15:0: [sdb] Attached SCSI disk [ 73.696033] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 78.755160] sd 1:0:15:0: Attached scsi generic sg0 type 0 [ 78.784083] sd 3:0:15:0: Attached scsi generic sg1 type 0 [ 81.752397] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro [ 84.093156] Adding 2097148k swap on /dev/sdb3. Priority:-2 extents:1 across:2097148k FS [ 88.344294] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem [ 88.362215] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null) [ 88.384382] EXT4-fs (sda4): mounting ext3 file system using the ext4 subsystem [ 88.416794] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) [ 88.478565] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null) [ 108.188452] Adding 20971516k swap on /DATA2/swapfile. Priority:-3 extents:644 across:47423488k FS [ 110.796478] audit: type=1400 audit(1524301794.375:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=877 comm="apparmor_parser" [ 110.808605] audit: type=1400 audit(1524301794.375:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=877 comm="apparmor_parser" [ 110.828428] audit: type=1400 audit(1524301794.375:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=877 comm="apparmor_parser" [ 110.887028] audit: type=1400 audit(1524301794.463:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=878 comm="apparmor_parser" [ 113.888628] net eth0: Setting full-duplex based on MII#1 link partner capability of c941