[ 0.000000] Linux version 4.15.0-3-parisc (debian-kernel@lists.debian.org) (gcc version 7.3.0 (Debian 7.3.0-16)) #1 Debian 4.15.17-1 (2018-04-19) [ 0.000000] unwind_init: start = 0x10877efc, end = 0x108cef7c, entries = 22280 [ 0.000000] FP[0] enabled: Rev 1 Model 15 [ 0.000000] The 32-bit Kernel has started... [ 0.000000] Kernel default page size is 4 KB. Huge pages disabled. [ 0.000000] bootconsole [ttyB0] enabled [ 0.000000] Initialized PDC Console for debugging. [ 0.000000] Determining PDC firmware type: System Map. [ 0.000000] model 00005020 00000481 00000000 02020202 7794d7fe 100000f0 00000004 000000ba 000000ba [ 0.000000] vers 00000008 [ 0.000000] CPUID vers 15 rev 8 (0x000001e8) [ 0.000000] capabilities 0x2 [ 0.000000] model 9000/778/B160L [ 0.000000] Memory Ranges: [ 0.000000] 0) Start 0x0000000000000000 End 0x0000000007ffffff Size 128 MB [ 0.000000] Total Memory: 128 MB [ 0.000000] initrd: 16cf3000-17fee6ab [ 0.000000] initrd: reserving 06cf3000-07fee6ab (mem_max 08000000) [ 0.000000] PDT: Firmware does not provide any page deallocation information. [ 0.000000] On node 0 totalpages: 32768 [ 0.000000] Normal zone: 288 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 32768 pages, LIFO batch:7 [ 0.000000] LED display at f0190001 registered [ 0.000000] random: fast init done [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32480 [ 0.000000] Kernel command line: root=/dev/sda5 HOME=/ cryptomgr.notests console=ttyS0 TERM=vt102 palo_kernel=2/vmlinux [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 100948K/131072K available (6160K kernel code, 1111K rwdata, 1119K rodata, 364K init, 476K bss, 30124K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=16, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS: 96 [ 0.000058] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 13421772796ns [ 0.100929] Console: colour dummy device 160x64 [ 0.158023] Calibrating delay loop... 104.96 BogoMIPS (lpj=209920) [ 0.277711] pid_max: default: 32768 minimum: 301 [ 0.337778] Security Framework initialized [ 0.389329] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.472894] AppArmor: AppArmor initialized [ 0.525350] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.608633] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.715152] devtmpfs: initialized [ 0.762694] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.885415] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.966509] NET: Registered protocol family 16 [ 1.023301] audit: initializing netlink subsys (disabled) [ 1.094546] EISA bus registered [ 1.134174] audit: type=2000 audit(1524392022.088:1): state=initialized audit_enabled=0 res=1 [ 1.242178] Searching for devices... [ 2.191819] Found devices: [ 2.225905] 1. Phantom PseudoBC GSC+ Port at 0xffc00000 [8] { 7, 0x0, 0x504, 0x00000 } [ 2.325531] 2. Dino PCI Bridge at 0xfff80000 [8/0] { 13, 0x3, 0x680, 0x0000a } [ 2.416409] 3. Merlin+ 132 Dino RS-232 at 0xfff83000 [8/0/63] { 10, 0x0, 0x022, 0x0008c } [ 2.519298] 4. Merlin 160 Core FW-SCSI at 0xfff8c000 [8/12] { 4, 0x0, 0x03d, 0x00089 } [ 2.618931] 5. Merlin 160 Core BA at 0xffd00000 [8/16] { 11, 0x0, 0x03d, 0x00081 }, additional addresses: 0xffd0c000 0xffc00000 [ 2.764499] 6. Merlin 160 Core RS-232 at 0xffd05000 [8/16/4] { 10, 0x0, 0x03d, 0x0008c } [ 2.866299] 7. Merlin 160 Core SCSI at 0xffd06000 [8/16/5] { 10, 0x0, 0x03d, 0x00082 } [ 2.965916] 8. Merlin 160 Core LAN (802.3) at 0xffd07000 [8/16/6] { 10, 0x0, 0x03d, 0x0008a } [ 3.073179] 9. Merlin 160 Core Centronics at 0xffd02000 [8/16/0] { 10, 0x0, 0x03d, 0x00074 }, additional addresses: 0xffd01000 0xffd03000 [ 3.229657] 10. Merlin 160 Core Audio at 0xffd04000 [8/16/1] { 10, 0x4, 0x03d, 0x0007b } [ 3.331461] 11. Merlin 160 Core PS/2 Port at 0xffd08000 [8/16/7] { 10, 0x0, 0x03d, 0x00084 } [ 3.437636] 12. Merlin 160 Core PS/2 Port at 0xffd08100 [8/16/8] { 10, 0x0, 0x03d, 0x00084 } [ 3.543804] 13. Coral SGC Graphics at 0xfa000000 [8/4] { 10, 0x0, 0x004, 0x00077 } [ 3.639057] 14. Coral SGC Graphics at 0xf4000000 [8/8] { 10, 0x0, 0x004, 0x00077 } [ 3.734307] 15. Gecko GSC Core Graphics at 0xf8000000 [8/24] { 10, 0x0, 0x016, 0x00085 }, additional addresses: 0xf0011000 [ 3.874371] 16. Merlin L2 160 (9000/778/B160L) at 0xfffbe000 [62] { 0, 0x0, 0x502, 0x00004 } [ 3.980533] 17. Memory at 0xfffbf000 [63] { 1, 0x0, 0x067, 0x00009 } [ 4.060485] 18. Merlin+ 132 Dino PS/2 Port at 0xfff81000 [1] { 10, 0x0, 0x022, 0x00096 } [ 4.162257] Enabling regular chassis codes support v0.05 [ 4.360952] CPU(s): 1 x PA7300LC (PCX-L2) at 160.000000 MHz [ 4.439399] Whole cache flush 11770 cycles, flushing 9080832 bytes 1313328 cycles [ 4.439434] Cache flush threshold set to 2 KiB [ 4.496223] Whole TLB flush 1155 cycles, flushing 9080832 bytes 140227 cycles [ 4.496255] TLB flush threshold set to 16 KiB [ 4.552428] Lasi version 0 at 0xffd00000 found. [ 4.611457] Dino version 3.1 found at 0xfff80000 [ 4.669839] Dino: No PCI devices enabled. [ 4.721140] dino 8:0: PCI host bridge to bus 0000:00 [ 4.783660] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 4.861440] pci_bus 0000:00: root bus resource [bus 00-ff] [ 4.930811] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 [ 4.931861] powersw: Soft power switch at 0xf0140000 enabled. [ 5.038758] vgaarb: loaded [ 5.587792] VFS: Disk quotas dquot_6.6.0 [ 5.637614] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 5.729461] AppArmor: AppArmor Filesystem Enabled [ 5.849926] NET: Registered protocol family 2 [ 5.909652] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 5.997400] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 6.077427] TCP: Hash tables configured (established 1024 bind 1024) [ 6.158563] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 6.232044] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 6.312402] NET: Registered protocol family 1 [ 6.367378] PCI: CLS 16 bytes [ 6.369652] Unpacking initramfs... [ 15.329787] Freeing initrd memory: 19436K [ 15.380953] clocksource: cr16: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11945377789 ns [ 15.494897] clocksource: Switched to clocksource cr16 [ 15.559382] Enabling PDC chassis warnings support v0.05 [ 15.629892] Initialise system trusted keyrings [ 15.686804] workingset: timestamp_bits=14 max_order=15 bucket_order=1 [ 15.825705] zbud: loaded [ 15.866543] alg: self-tests disabled [ 15.923747] Key type asymmetric registered [ 15.975759] Asymmetric key parser 'x509' registered [ 16.037571] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 16.131387] io scheduler noop registered [ 16.180767] io scheduler deadline registered [ 16.237140] io scheduler cfq registered (default) [ 16.296349] io scheduler mq-deadline registered [ 16.359788] PDC Stable Storage facility v0.30 [ 16.495703] STI GSC/PCI core graphics driver Version 0.9b [ 16.586178] STI ROM supports 32 bit firmware functions. [ 16.652038] STI selected 8x16 framebuffer font VGA8x16 for sticon [ 16.729476] id 2bcb015a-9a02587, conforms to spec rev. 8.04 [ 17.119914] graphics card name: HPA4071B [ 17.250694] STI ROM supports 32 bit firmware functions. [ 17.316489] STI selected 8x16 framebuffer font VGA8x16 for sticon [ 17.393896] id 2d08c0a7-9a02587, conforms to spec rev. 8.07 [ 17.470527] graphics card name: HPA4450AX1024 [ 17.543843] STI ROM supports 32 bit firmware functions. [ 17.609656] STI selected 8x16 framebuffer font VGA8x16 for sticon [ 17.686543] id 2d08c0a7-9a02587, conforms to spec rev. 8.07 [ 17.762881] graphics card name: INTERNAL_EG_X1024 [ 17.827187] sticon: Initializing STI text console. [ 17.895797] Console: switching to colour STI console 160x64 [ 18.470213] Console: switching to colour frame buffer device 160x64 [ 18.748236] fb0: stifb 1280x1024-32 frame buffer device, HPA4071B, id: 2bcb015a, mmio: 0xfa100000 [ 18.862132] fb1: stifb 1024x768-8 frame buffer device, HPA4450AX1024, id: 2d08c0a7, mmio: 0xf4100000 [ 18.979524] fb2: stifb 1024x768-8 frame buffer device, INTERNAL_EG_X1024, id: 2d08c0a7, mmio: 0xf8100000 [ 19.099943] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 19.187131] console [ttyS0] disabled [ 19.252984] 8:16:4: ttyS0 at MMIO 0xffd05800 (irq = 16, base_baud = 454545) is a 16550A [ 19.353944] console [ttyS0] enabled [ 19.439340] bootconsole [ttyB0] disabled [ 19.559604] 8:0:63: ttyS1 at MMIO 0xfff83800 (irq = 22, base_baud = 454545) is a 16550A [ 19.659158] serio: gsc-ps2-keyboard port at 0x9aeaa525 irq 21 @ 8:16:7 [ 19.738619] serio: gsc-ps2-mouse port at 0x3990f1d6 irq 21 @ 8:16:8 [ 19.816723] mousedev: PS/2 mouse device common for all mice [ 19.892106] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0 [ 19.977737] ledtrig-cpu: registered to indicate activity on CPUs [ 20.056971] NET: Registered protocol family 10 [ 20.474372] gscps2.c: timeout - could not write byte 0xed [ 20.474412] gscps2.c: sending byte 0xed failed. [ 20.861009] Segment Routing with IPv6 [ 20.906217] mip6: Mobile IPv6 [ 20.941836] NET: Registered protocol family 17 [ 20.995058] mpls_gso: MPLS GSO support [ 21.044612] registered taskstats version 1 [ 21.093546] Loading compiled-in X.509 certificates [ 21.353272] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630' [ 21.449771] zswap: loaded using pool lzo/zbud [ 21.502856] AppArmor: AppArmor sha1 policy hashing enabled [ 21.568546] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 21.645129] rtc-generic rtc-generic: setting system clock to 2018-04-22 10:14:03 UTC (1524392043) [ 22.046133] gscps2.c: timeout - could not write byte 0xed [ 22.046164] gscps2.c: sending byte 0xed failed. [ 22.348719] Freeing unused kernel memory: 364K [ 22.402953] Write protecting the kernel read-only data: 1119k [ 25.608172] LASI 82596 driver - Revision: 1.30 [ 26.081074] SCSI subsystem initialized [ 26.384660] Found i82596 at 0xffd07000, IRQ 18 [ 27.095779] eth0: 82596 at 0xffd07000, 08:00:09:ef:34:f5 IRQ 18. [ 27.200867] zalon_probe: Zalon version 1, IRQ 67 [ 27.256070] ncr53c720-0: rev 0xf irq 67 [ 27.685324] 53c700: Version 2.8 By James.Bottomley@HansenPartnership.com [ 27.765298] scsi0: 53c710 rev 2 [ 28.805724] scsi host0: LASI SCSI 53c700 [ 29.019516] ncr53c720-0: ID 7, Fast-10, Parity Checking, Differential [ 29.536320] scsi host1: ncr53c8xx-3.4.3g [ 30.292381] scsi 0:0:1:0: CD-ROM PHILIPS PCA80SC V3-0 PQ: 0 ANSI: 2 [ 30.389454] scsi target0:0:1: Beginning Domain Validation [ 30.455898] scsi target0:0:1: asynchronous [ 30.517421] scsi target0:0:1: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 8) [ 30.607425] scsi target0:0:1: Domain Validation skipping write tests [ 30.683250] scsi target0:0:1: Ending Domain Validation [ 32.908578] scsi 1:0:6:0: Direct-Access SEAGATE ST32171W HP03 PQ: 0 ANSI: 2 [ 33.005534] scsi target1:0:6: Beginning Domain Validation [ 33.075133] scsi target1:0:6: asynchronous [ 33.139306] scsi target1:0:6: wide asynchronous [ 33.205131] scsi target1:0:6: FAST-10 WIDE SCSI 20.0 MB/s ST (100 ns, offset 8) [ 33.299232] scsi target1:0:6: Domain Validation skipping write tests [ 33.375044] scsi target1:0:6: Ending Domain Validation [ 35.956094] sd 1:0:6:0: Power-on or device reset occurred [ 36.024516] sd 1:0:6:0: [sda] 4194685 512-byte logical blocks: (2.15 GB/2.00 GiB) [ 36.125901] sr 0:0:1:0: [sr0] scsi-1 drive [ 36.174794] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 36.248956] sd 1:0:6:0: [sda] Write Protect is off [ 36.306141] sd 1:0:6:0: [sda] Mode Sense: 9f 00 10 08 [ 36.316741] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 36.417281] sd 1:0:6:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 36.633462] sda: sda1 sda2 sda3 < sda5 sda6 > [ 36.738138] sd 1:0:6:0: [sda] Attached SCSI disk [ 37.994278] random: crng init done [ 41.675588] EXT4-fs (sda5): mounting ext3 file system using the ext4 subsystem [ 41.815737] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 56.531244] parport_init_chip: initialize bidirectional-mode. [ 56.641376] sd 1:0:6:0: Attached scsi generic sg0 type 0 [ 57.297608] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 57.388668] parport0: PC-style at 0xffd02800, irq 19 [PCSPP,TRISTATE] [ 62.800374] udisks-part-id(336): unaligned access to 0xf948b94e at ip=0x00012bd3 [ 62.888739] udisks-part-id(336): unaligned access to 0xf948b952 at ip=0x00012be7 [ 62.979657] udisks-part-id(336): unaligned access to 0xf948b95e at ip=0x00012bd3 [ 63.068047] udisks-part-id(336): unaligned access to 0xf948b962 at ip=0x00012be7 [ 63.161999] udisks-part-id(336): unaligned access to 0xf948b96e at ip=0x00012bd3 [ 66.620723] eth0: link ok. [ 72.944839] Adding 144548k swap on /dev/sda6. Priority:-2 extents:1 across:144548k FS [ 74.031773] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro [ 82.571098] handle_unaligned: 91 callbacks suppressed [ 82.571160] udisks-part-id(727): unaligned access to 0xf8fed98e at ip=0x00012bd3 [ 82.720968] udisks-part-id(727): unaligned access to 0xf8fed992 at ip=0x00012be7 [ 82.860452] udisks-part-id(727): unaligned access to 0xf8fed99e at ip=0x00012bd3 [ 82.949077] udisks-part-id(727): unaligned access to 0xf8fed9a2 at ip=0x00012be7 [ 83.117816] udisks-part-id(727): unaligned access to 0xf8fed9ae at ip=0x00012bd3 [ 85.193301] loop: module loaded [ 88.237623] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem [ 88.369657] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null) [ 101.094627] audit: type=1400 audit(1524392123.381:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=952 comm="apparmor_parser" [ 101.334719] audit: type=1400 audit(1524392123.573:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=952 comm="apparmor_parser" [ 101.512393] audit: type=1400 audit(1524392123.597:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=952 comm="apparmor_parser" [ 102.730883] RPC: Registered named UNIX socket transport module. [ 102.801653] RPC: Registered udp transport module. [ 102.857803] RPC: Registered tcp transport module. [ 102.913870] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 103.265677] FS-Cache: Loaded [ 103.793790] FS-Cache: Netfs 'nfs' registered for caching [ 104.561701] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 107.369020] fuse init (API version 7.26) [ 142.724820] systemd-logind[1607]: New seat seat0.