[ 0.000000] Linux version 4.19.0-5-parisc (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-7)) #1 Debian 4.19.37-3 (2019-05-15) [ 0.000000] FP[0] enabled: Rev 1 Model 15 [ 0.000000] The 32-bit Kernel has started... [ 0.000000] Kernel default page size is 4 KB. Huge pages disabled. [ 0.000000] bootconsole [ttyB0] enabled [ 0.000000] Initialized PDC Console for debugging. [ 0.000000] Determining PDC firmware type: System Map. [ 0.000000] model 00005040 00000481 00000000 02020202 77bb312b 100000f0 00000004 000000ba 000000ba [ 0.000000] vers 00000018 [ 0.000000] CPUID vers 15 rev 24 (0x000001f8) [ 0.000000] capabilities 0x2 [ 0.000000] model 9000/778/B180L [ 0.000000] Memory Ranges: [ 0.000000] 0) Start 0x0000000000000000 End 0x000000001fffffff Size 512 MB [ 0.000000] Total Memory: 512 MB [ 0.000000] initrd: 2ea3c000-2ffee776 [ 0.000000] initrd: reserving 1ea3c000-1ffee776 (mem_max 20000000) [ 0.000000] PDT: Firmware does not provide any page deallocation information. [ 0.000000] On node 0 totalpages: 131072 [ 0.000000] Normal zone: 1152 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 131072 pages, LIFO batch:31 [ 0.000000] LED display at f0190001 registered [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129920 [ 0.000000] Kernel command line: root=UUID=a1dcb502-ed39-46e0-9362-b229d03c1022 HOME=/ console=ttyS0 TERM=vt102 palo_kernel=2/vmlinux [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 486712K/524288K available (6588K kernel code, 1025K rwdata, 1201K rodata, 492K init, 468K bss, 37576K reserved, 0K cma-reserved) [ 0.000000] random: get_random_u32 called from __kmem_cache_create+0x70/0x540 with crng_init=0 [ 0.000000] SLUB: HWalign=16, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS: 96 [ 0.000050] sched_clock: 32 bits at 180MHz, resolution 5ns, wraps every 11930464253ns [ 0.100405] Console: colour dummy device 160x64 [ 0.157517] Calibrating delay loop... 118.27 BogoMIPS (lpj=236544) [ 0.269704] pid_max: default: 32768 minimum: 301 [ 0.329718] Security Framework initialized [ 0.381242] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.464897] AppArmor: AppArmor initialized [ 0.517327] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.600590] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.708805] devtmpfs: initialized [ 0.756526] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.879215] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.961021] NET: Registered protocol family 16 [ 1.017838] audit: initializing netlink subsys (disabled) [ 1.089953] EISA bus registered [ 1.129562] audit: type=2000 audit(1558964229.084:1): state=initialized audit_enabled=0 res=1 [ 1.237500] Searching for devices... [ 2.291768] Found devices: [ 2.325837] 1. Phantom PseudoBC GSC+ Port at 0xffc00000 [8] { 7, 0x0, 0x504, 0x00000 } [ 2.425433] 2. Dino PCI Bridge at 0xfff80000 [8/0] { 13, 0x3, 0x680, 0x0000a }, additional addresses: 0xf0800000 [ 2.554563] 3. Merlin+ 132 Dino RS-232 at 0xfff83000 [8/0/63] { 10, 0x0, 0x022, 0x0008c } [ 2.657443] 4. Merlin+ 180 Core BA at 0xffd00000 [8/16] { 11, 0x0, 0x03f, 0x00081 }, additional addresses: 0xffd0c000 0xffc00000 [ 2.804063] 5. Merlin+ 180 Core RS-232 at 0xffd05000 [8/16/4] { 10, 0x0, 0x03f, 0x0008c } [ 2.906939] 6. Merlin+ 180 Core SCSI at 0xffd06000 [8/16/5] { 10, 0x0, 0x03f, 0x00082 } [ 3.007640] 7. Merlin+ 180 Core Centronics at 0xffd02000 [8/16/0] { 10, 0x0, 0x03f, 0x00074 }, additional addresses: 0xffd01000 0xffd03000 [ 3.165183] 8. Merlin+ 180 Core Audio at 0xffd04000 [8/16/1] { 10, 0x4, 0x03f, 0x0007b } [ 3.266966] 9. Merlin+ 180 Core PS/2 Port at 0xffd08000 [8/16/7] { 10, 0x0, 0x03f, 0x00084 } [ 3.373126] 10. Merlin+ 180 Core PS/2 Port at 0xffd08100 [8/16/8] { 10, 0x0, 0x03f, 0x00084 } [ 3.480366] 11. Gecko GSC Core Graphics at 0xf8000000 [8/24] { 10, 0x0, 0x016, 0x00085 }, additional addresses: 0xf0011000 [ 3.620412] 12. Merlin L2+ 180 (9000/778/B180L) at 0xfffbe000 [62] { 0, 0x0, 0x504, 0x00004 } [ 3.727652] 13. Memory at 0xfffbf000 [63] { 1, 0x0, 0x05a, 0x00009 } [ 3.807586] 14. Merlin+ 132 Dino PS/2 Port at 0xfff81000 [1] { 10, 0x0, 0x022, 0x00096 } [ 3.909344] Enabling regular chassis codes support v0.05 [ 4.139554] CPU(s): 1 x PA7300LC (PCX-L2) at 180.000000 MHz [ 4.217410] Whole cache flush 12509 cycles, flushing 9506816 bytes 1376444 cycles [ 4.217446] Cache flush threshold set to 2 KiB [ 4.274051] Whole TLB flush 966 cycles, flushing 9506816 bytes 128215 cycles [ 4.274084] TLB flush threshold set to 8 KiB [ 4.329060] Lasi version 0 at 0xffd00000 found. [ 4.388114] Dino version 3.1 found at 0xfff80000 [ 4.447175] dino 8:0: PCI host bridge to bus 0000:00 [ 4.509695] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 4.587445] pci_bus 0000:00: root bus resource [mem 0xf0800000-0xf0ffffff] [ 4.673924] pci_bus 0000:00: root bus resource [bus 00-ff] [ 4.743223] pci 0000:00:13.0: [1000:000f] type 00 class 0x010000 [ 4.743350] pci 0000:00:13.0: reg 0x10: [io 0xfe00-0xfeff] [ 4.743421] pci 0000:00:13.0: reg 0x14: [mem 0xf0ffd000-0xf0ffd0ff] [ 4.743489] pci 0000:00:13.0: reg 0x18: [mem 0xf0ffe000-0xf0ffefff] [ 4.744858] pci 0000:00:14.0: [1011:0019] type 00 class 0x020000 [ 4.744970] pci 0000:00:14.0: reg 0x10: [io 0xff00-0xff7f] [ 4.745040] pci 0000:00:14.0: reg 0x14: [mem 0xf0fff000-0xf0fff07f] [ 4.745175] pci 0000:00:14.0: reg 0x30: [mem 0xf0f80000-0xf0fbffff pref] [ 4.746303] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 [ 4.746435] pci 0000:00:13.0: BAR 2: assigned [mem 0xf0800000-0xf0800fff] [ 4.831881] pci 0000:00:13.0: BAR 0: assigned [io 0x0100-0x01ff] [ 4.908557] pci 0000:00:13.0: BAR 1: assigned [mem 0xf0801000-0xf08010ff] [ 4.993965] pci 0000:00:14.0: BAR 0: assigned [io 0x0080-0x00ff] [ 5.070646] pci 0000:00:14.0: BAR 1: assigned [mem 0xf0802000-0xf080207f] [ 5.157119] powersw: Soft power switch at 0xf0140000 enabled. [ 5.266806] vgaarb: loaded [ 5.760014] random: fast init done [ 5.852527] VFS: Disk quotas dquot_6.6.0 [ 5.902247] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 5.994439] AppArmor: AppArmor Filesystem Enabled [ 6.112370] NET: Registered protocol family 2 [ 6.172938] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes) [ 6.269849] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 6.358712] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 6.439903] TCP: Hash tables configured (established 4096 bind 4096) [ 6.520833] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 6.594306] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 6.674693] NET: Registered protocol family 1 [ 6.729660] NET: Registered protocol family 44 [ 6.785563] PCI: CLS 16 bytes [ 6.787384] Unpacking initramfs... [ 15.957947] Freeing initrd memory: 22216K [ 16.008973] clocksource: cr16: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 10618113593 ns [ 16.122789] clocksource: Switched to clocksource cr16 [ 16.187286] Enabling PDC chassis warnings support v0.05 [ 16.257729] Initialise system trusted keyrings [ 16.313836] Key type blacklist registered [ 16.365514] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 16.518444] zbud: loaded [ 59.532190] random: crng init done [ 259.752077] Key type asymmetric registered [ 259.804211] Asymmetric key parser 'x509' registered [ 259.865837] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 259.959758] io scheduler noop registered [ 260.009156] io scheduler deadline registered [ 260.064639] io scheduler cfq registered (default) [ 260.123823] io scheduler mq-deadline registered [ 260.188493] PDC Stable Storage facility v0.30 [ 260.332287] STI GSC/PCI core graphics driver Version 0.9b [ 260.415388] STI ROM supports 32 bit firmware functions. [ 260.481162] STI selected 8x16 framebuffer font VGA8x16 for sticon [ 260.557985] id 2d08c0a7-9a02587, conforms to spec rev. 8.07 [ 260.633424] graphics card name: INTERNAL_EG_1024 [ 260.696669] sticon: Initializing STI text console. [ 260.885420] Console: switching to colour STI console 128x48 [ 261.115655] Console: switching to colour frame buffer device 128x48 [ 261.225010] fb0: stifb 1024x768-8 frame buffer device, INTERNAL_EG_1024, id: 2d08c0a7, mmio: 0xf8100000 [ 261.344464] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 261.433196] console [ttyS0] disabled [ 261.498966] 8:16:4: ttyS0 at MMIO 0xffd05800 (irq = 16, base_baud = 454545) is a 16550A [ 261.600098] console [ttyS0] enabled [ 261.685444] bootconsole [ttyB0] disabled [ 261.806024] 8:0:63: ttyS1 at MMIO 0xfff83800 (irq = 21, base_baud = 454545) is a 16550A [ 261.906041] serio: gsc-ps2-keyboard port at 0x2fc8dd40 irq 20 @ 8:16:7 [ 261.985465] serio: gsc-ps2-mouse port at 0x04402b35 irq 20 @ 8:16:8 [ 262.063337] mousedev: PS/2 mouse device common for all mice [ 262.138203] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0 [ 262.261209] input: AT Raw Set 2 keyboard as /devices/parisc/8/8:16/8:16:7/serio0/input/input0 [ 262.363362] ledtrig-cpu: registered to indicate activity on CPUs [ 262.451658] NET: Registered protocol family 10 [ 262.769458] Segment Routing with IPv6 [ 262.814542] mip6: Mobile IPv6 [ 262.850130] NET: Registered protocol family 17 [ 262.904224] mpls_gso: MPLS GSO support [ 262.953595] registered taskstats version 1 [ 263.002520] Loading compiled-in X.509 certificates [ 283.509260] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 283.613663] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def' [ 283.691200] zswap: loaded using pool lzo/zbud [ 283.744495] AppArmor: AppArmor sha1 policy hashing enabled [ 283.811566] rtc-generic rtc-generic: setting system clock to 2019-05-27 13:41:52 UTC (1558964512) [ 283.926692] Freeing unused kernel memory: 492K [ 283.981366] Write protecting the kernel read-only data: 1201k [ 284.049901] Run /init as init process [ 287.315541] tulip: Linux Tulip driver version 1.1.15-NAPI (Feb 27, 2007) [ 287.848309] SCSI subsystem initialized [ 288.041412] tulip0: no phy info, aborting mtable build [ 288.103472] tulip0: MII transceiver #1 config 1000 status 782d advertising 01e1 [ 288.389094] 53c700: Version 2.8 By James.Bottomley@HansenPartnership.com [ 288.469065] scsi0: 53c710 rev 2 [ 289.509126] scsi host0: LASI SCSI 53c700 [ 289.748271] sym0: <875> rev 0x4 at pci 0000:00:13.0 irq 22 [ 290.296707] sym0: No NVRAM, ID 7, Fast-20, SE, parity checking [ 290.602216] net eth0: Digital DS21142/43 Tulip rev 48 at MMIO 0xf0802000, 00:60:b0:b2:d9:58, IRQ 23 [ 290.891513] sym0: SCSI BUS has been reset. [ 290.940489] scsi host1: sym-2.2.3 [ 291.036671] tulip 0000:00:14.0 enp0s20: renamed from eth0 [ 291.861079] input: PS/2 Logitech Mouse as /devices/parisc/8/8:16/8:16:8/serio1/input/input2 [ 295.511186] scsi 1:0:5:0: Direct-Access IBM DDRS-34560WS HP01 PQ: 0 ANSI: 2 [ 295.607928] scsi target1:0:5: tagged command queuing enabled, command queue depth 16. [ 295.701826] scsi target1:0:5: Beginning Domain Validation [ 295.792714] scsi target1:0:5: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 15) [ 295.888660] scsi target1:0:5: Domain Validation skipping write tests [ 295.964497] scsi target1:0:5: Ending Domain Validation [ 296.054073] scsi 1:0:6:0: Direct-Access IBM DDRS-34560WS HP01 PQ: 0 ANSI: 2 [ 296.150752] scsi target1:0:6: tagged command queuing enabled, command queue depth 16. [ 296.244509] scsi target1:0:6: Beginning Domain Validation [ 296.335412] scsi target1:0:6: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 15) [ 296.431466] scsi target1:0:6: Domain Validation skipping write tests [ 296.507311] scsi target1:0:6: Ending Domain Validation [ 299.117181] sd 1:0:5:0: Power-on or device reset occurred [ 299.187968] sd 1:0:6:0: Power-on or device reset occurred [ 299.253526] sd 1:0:5:0: [sda] 8388314 512-byte logical blocks: (4.29 GB/4.00 GiB) [ 299.377366] sd 1:0:6:0: [sdb] 8388314 512-byte logical blocks: (4.29 GB/4.00 GiB) [ 299.466984] sd 1:0:5:0: [sda] Write Protect is off [ 299.524146] sd 1:0:5:0: [sda] Mode Sense: b9 00 00 08 [ 299.556278] sd 1:0:5:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 299.664435] sd 1:0:6:0: [sdb] Write Protect is off [ 299.721644] sd 1:0:6:0: [sdb] Mode Sense: b9 00 00 08 [ 299.757625] sd 1:0:6:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 299.993834] sda: sda1 sda2 sda3 < sda5 sda6 > [ 300.198728] sd 1:0:6:0: [sdb] Attached SCSI disk [ 300.255662] sd 1:0:5:0: [sda] Attached SCSI disk [ 304.462395] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 308.896689] systemd[1]: Inserted module 'autofs4' [ 309.244160] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 309.500478] systemd[1]: Detected architecture parisc. [ 309.772852] systemd[1]: Set hostname to . [ 315.681033] systemd[1]: Listening on Journal Audit Socket. [ 315.849360] systemd[1]: Created slice User and Session Slice. [ 316.001559] systemd[1]: Listening on Journal Socket (/dev/log). [ 316.159853] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 316.384744] systemd[1]: Listening on Syslog Socket. [ 316.539907] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 316.706983] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 316.882068] systemd[1]: Listening on udev Control Socket. [ 317.036973] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 317.203170] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 319.780894] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro [ 320.776883] systemd[1]: Started Remount Root and Kernel File Systems. [ 321.312728] systemd[1]: Started Load Kernel Modules. [ 321.835720] systemd[1]: Starting Apply Kernel Variables... [ 322.277568] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 322.787225] systemd[1]: Condition check resulted in Kernel Configuration File System being skipped. [ 323.362709] systemd[1]: Starting Load/Save Random Seed... [ 323.717711] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 324.290887] systemd[1]: Starting Create System Users... [ 324.632278] systemd[1]: Started Journal Service. [ 327.532888] systemd-journald[145]: Received request to flush runtime journal from PID 1 [ 331.093600] parport_init_chip: initialize bidirectional-mode. [ 331.633374] sd 1:0:5:0: Attached scsi generic sg0 type 0 [ 331.972785] parport0: PC-style at 0xffd02800, irq 18 [PCSPP,TRISTATE] [ 332.361555] sd 1:0:6:0: Attached scsi generic sg1 type 0 [ 346.252793] Adding 495612k swap on /dev/sda6. Priority:-2 extents:1 across:495612k FS [ 348.251896] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem [ 348.399304] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null) [ 355.296913] net enp0s20: Setting full-duplex based on MII#1 link partner capability of c9e1 [ 548.424154] ISO 9660 Extensions: RRIP_1991A