Firmware Version 2.0 Duplex Console IO Dependent Code (IODC) revision 1 ------------------------------------------------------------------------------ (c) Copyright 1995-2000, Hewlett-Packard Company, All rights reserved ------------------------------------------------------------------------------ Processor Speed State Coprocessor State I/D Cache --------- -------- --------------------- ----------------- ------------- 0 750 MHz Active Functional 768 kB/1536 kB Central Bus Speed: 120 MHz Available memory: 2147483648 bytes Good memory required: 32038912 bytes Primary boot path: FWSCSI.5.0 Alternate boot path: LAN.0.0.0.0.0.0 Console path: SERIAL_1.9600.8.none Keyboard path: USB ----- Main Menu ------------------------------------------------------------- Command Description ------- ----------- BOot [PRI|ALT|] Boot from specified path PAth [PRI|ALT|CON|KEY []] Display or modify a path SEArch [DIsplay|[[IPL] []]] Search for boot devices COnfiguration [] Access Configuration menu/commands INformation [] Access Information menu/commands SERvice [] Access Service menu/commands DIsplay Redisplay the current menu HElp [|] Display help for menu or command RESET Restart the system ----- Main Menu: Enter command > co ------- Configuration Menu ---------------------------------------------------- Command Description ------- ----------- AUto [BOot|SEArch|STart] [ON|OFF] Display or set specified flag BootID [ []] Display or modify processor boot ID BootINfo Display boot-related information CPUconfig [ [ON|OFF]] Config/deconfig processor DEfault Set the system to predefined values FanChoice [DeskSide|RackMount] Display or set the fan preference FastBoot [ON|OFF] Display or set boot tests execution LanConfig [] Display or set LAN configuration MOnitor [LIST|[ ]] Change the current monitor type PAth [PRI|ALT|CON|KEY []] Display or modify a path PreviousPower [ON|OFF] Set previous power state SEArch [DIsplay|[[IPL] []]] Search for boot devices SECure [ON|OFF] Set/show security mode TIme [c:y:m:d:h:m:[s]] Read or set the real time clock BOot [PRI|ALT|] Boot from specified path DIsplay Redisplay the current menu HElp [|] Display help for menu or command RESET Restart the system MAin Return to Main menu ----- Configuration Menu: Enter command > in ----- Information Menu ------------------------------------------------------ Command Description ------- ----------- ALL Display all system information BootINfo Display boot-related information CAche Display cache information ChipRevisions Display revisions of VLSI and firmware CoProcessor Display coprocessor information FwrVersion Display firmware version IO Display I/O interface information LanAddress Display built-in system LAN address MEmory Display memory information PRocessor Display processor information SysConfig Display the system configuration WArnings Display selftest warning messages BOot [PRI|ALT|] Boot from specified path DIsplay Redisplay the current menu HElp [|] Display help for menu or command RESET Restart the system MAin Return to Main menu ----- Information Menu: Enter command > io I/O MODULE INFORMATION IODC IODC Path Decimal Type Location HVER SVER Vers Dep ------------ ----------- --------------------- ---------- ---- ---- ---- ---- LAN 10/0/12/0 Ethernet built-in 0610 a200 0x02 0x00 AUDIO 10/0/13/0 Audio built-in IDE 10/0/14/0 IDE built-in 0610 a300 0x00 0x00 SUPERIO MISC 10/0/14/1 Bridge Device built-in SERIAL_1 10/0/14/1/1 RS232 Port built-in 0610 8c00 0x01 0x00 SERIAL_2 10/0/14/1/2 RS232 Port built-in 0610 8c00 0x01 0x00 PARALLEL 10/0/14/1/3 Parallel Port built-in USB 10/0/14/2 USB built-in 0610 a900 0x98 0x00 SCSI 10/0/15/0 SCSI built-in 0610 a300 0x00 0x00 FWSCSI 10/0/15/1 SCSI built-in 0610 a300 0x00 0x00 GRAPHICS(4) 10/1/4/0 PCI_GRAFFITIX1280 slot 4 0070 8500 0x01 0x00 GRAPHICS(2) 10/6/2/0 A1299B slot 2 0070 8500 0x01 0x00 Menu: Enter command > bo Interact with IPL (Y, N, Q)?> n Booting... Boot IO Dependent Code (IODC) revision 0 HARD Booted. palo ipl 2.23 https://parisc.wiki.kernel.org - Sun, 21 May 2023 08:41:01 +0000 Boot limited to sectors below 2GB: NO Partition Start End Sectors Size Id Type 1 2048 67583 65536 32M f0 Palo 2 67584 321535 253952 124M 83 Linux 5 323584 276248575 275924992 131G 83 Linux 6 276250624 286748671 10498048 5G 83 Linux PALO(F0) partition contains: Information: No console specified on kernel command line. This is normal. PALO will choose the console currently used by firmware (serial). Command line for kernel: 'root=LABEL=ROOT rootfstype=ext4 HOME=/ panic_timeout=60 panic=-1 cryptomgr.notests console=ttyS0 TERM=vt102 palo_kernel=2/vmlinux' Selected kernel: /vmlinux from partition 2 Selected ramdisk: /initrd.img from partition 2 ELF64 executable Segment 0 load 0x000e0000 size 6100216 mediaptr 0x1000 Segment 1 load 0x01e00000 size 25628 mediaptr 0x5d3000 Loading ramdisk 27326945 bytes @ 3e5de000... Branching to kernel entry point 0x000e0000. If this is the last message you see, you may need to switch your console. This is a common symptom -- search the FAQ and mailing list at https://parisc.wiki.kernel.org Decompressing Linux... done. Booting the kernel. [ 0.000000] Linux version 6.12.3-parisc64 (debian-kernel@lists.debian.org) (hppa64-linux-gnu-gcc-14 (GCC) 14.2.0, GNU ld (GNU Binutils for Debian) 2.43.50.20241204) #1 SMP Debian 6.12.3-1 (2024-12-07) [ 0.000000] FP[0] enabled: Rev 1 Model 19 [ 0.000000] The 64-bit Kernel has started... [ 0.000000] Kernel default page size is 4 KB. Huge pages enabled with 1 MB physical and 2 MB virtual size. [ 0.000000] Determining PDC firmware type: System Map. [ 0.000000] model 00005dc0 00000481 00000000 00000002 777c3e84 100000f0 00000008 000000b2 000000b2 00000001 [ 0.000000] vers 00000301 [ 0.000000] CPUID vers 19 rev 11 (0x0000026b) [ 0.000000] capabilities 0x7 [ 0.000000] HP-UX model name: 9000/785/C3700 [ 0.000000] Memory Ranges: [ 0.000000] 0) Start 0x0000000000000000 End 0x000000007fffffff Size 2048 MB [ 0.000000] Total Memory: 2048 MB [ 0.000000] initrd: 7e5de000-7ffed9e1 [ 0.000000] initrd: reserving 3e5de000-3ffed9e1 (mem_max 80000000) [ 0.000000] PDT: type PDT_PDC, size 50, entries 0, status 0, dbe_loc 0xffffffffffffffff, good_mem 30 MB [ 0.000000] PDT: Firmware reports all memory OK. [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x000007ffffffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] percpu: Embedded 47 pages/cpu s155648 r8192 d28672 u192512 [ 0.000000] SMP: bootstrap CPU ID is 0 [ 0.000000] Kernel command line: root=LABEL=ROOT rootfstype=ext4 HOME=/ panic_timeout=60 panic=-1 cryptomgr.notests console=ttyS0 TERM=vt102 palo_kernel=2/vmlinux earlycon=pdc [ 0.000000] earlycon: pdc0 at MMIO32be 0x0000000000000000 (options '') [ 0.000000] printk: legacy bootconsole [pdc0] enabled [ 0.000000] Unknown kernel command line parameters "panic_timeout=60 palo_kernel=2/vmlinux", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] Sorting __ex_table... [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 524288 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] ftrace: allocating 33141 entries in 130 pages [ 0.000000] ftrace: allocated 130 pages with 2 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. [ 0.000000] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. [ 0.000000] NR_IRQS: 128 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000004] sched_clock: 64 bits at 750MHz, resolution 1ns, wraps every 4398046511103ns [ 0.105337] clocksource: cr16: mask: 0xffffffffffffffff max_cycles: 0xacf9151134, max_idle_ns: 440795214493 ns [ 0.237934] Console: colour dummy device 160x64 [ 0.297605] Calibrating delay loop... 1494.01 BogoMIPS (lpj=2988032) [ 0.325585] pid_max: default: 32768 minimum: 301 [ 0.332838] LSM: initializing lsm=capability,landlock,lockdown,yama,apparmor,tomoyo,bpf,ipe,ima,evm [ 0.334036] landlock: Up and running. [ 0.337600] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.342678] AppArmor: AppArmor initialized [ 0.345953] TOMOYO Linux initialized [ 0.352142] LSM support for eBPF active [ 0.356194] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.357673] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.413958] TOC handler registered [ 0.425661] rcu: Hierarchical SRCU implementation. [ 0.429590] rcu: Max phase no-delay instances is 1000. [ 0.453627] smp: Bringing up secondary CPUs ... [ 0.457634] smp: Brought up 1 node, 1 CPU [ 0.746838] node 0 deferred pages initialised in 284ms [ 0.749872] Memory: 1996596K/2097152K available (17704K kernel code, 5964K rwdata, 2584K rodata, 2048K init, 932K bss, 97812K reserved, 0K cma-reserved) [ 0.756163] devtmpfs: initialized [ 0.765853] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.769972] futex hash table entries: 2048 (order: 4, 98304 bytes, linear) [ 0.778819] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.781889] audit: initializing netlink subsys (disabled) [ 0.787422] thermal_sys: Registered thermal governor 'fair_share' [ 0.787439] thermal_sys: Registered thermal governor 'bang_bang' [ 0.789619] audit: type=2000 audit(1737759835.496:1): state=initialized audit_enabled=0 res=1 [ 0.797608] thermal_sys: Registered thermal governor 'step_wise' [ 0.797622] thermal_sys: Registered thermal governor 'user_space' [ 0.801658] EISA bus registered [ 0.809658] Searching for devices... [ 0.969584] Found devices: [ 0.973590] 1. Astro BC Runway Port [10] at 0xfffffffffed00000 { type:12, hv:0x582, sv:0xb, rev:0x0 } [ 0.977589] 2. Elroy PCI Bridge [10:0] at 0xfffffffffed30000 { type:13, hv:0x782, sv:0xa, rev:0x0 } [ 0.981589] 3. Elroy PCI Bridge [10:1] at 0xfffffffffed32000 { type:13, hv:0x782, sv:0xa, rev:0x0 } [ 0.985589] 4. Elroy PCI Bridge [10:4] at 0xfffffffffed38000 { type:13, hv:0x782, sv:0xa, rev:0x0 } [ 0.989589] 5. Elroy PCI Bridge [10:6] at 0xfffffffffed3c000 { type:13, hv:0x782, sv:0xa, rev:0x0 } [ 0.993591] 6. Allegro W2 [32] at 0xfffffffffffa0000 { type:0, hv:0x5dc, sv:0x4, rev:0x0 } [ 0.997589] 7. Memory [49] at 0xfffffffffed10200 { type:1, hv:0x9c, sv:0x9, rev:0x0 } [ 1.001598] Enabling regular chassis codes support v0.05 [ 1.010301] CPU0: cpu core 0 of socket 0 [ 1.013699] CPU(s): 1 out of 1 PA8700 (PCX-W2) at 750.000000 MHz online [ 1.020689] alternatives: applied 3246 out of 3282 patches [ 1.031582] Calculated flush threshold is 614 KiB [ 1.033589] Cache flush threshold set to 1536 KiB [ 1.038422] Whole TLB flush 4072 cycles, Range flush 28311552 bytes 621340 cycles [ 1.041587] Calculated TLB flush threshold 184 KiB [ 1.045599] TLB flush threshold set to 184 KiB [ 1.057766] SBA found Astro 2.1 at 0xfffffffffed00000 [ 1.065857] Elroy version TR4.0 (0x5) found at 0xfffffffffed30000 [ 1.069860] LBA 10:0: PCI host bridge to bus 0000:00 [ 1.073591] pci_bus 0000:00: root bus resource [io 0x0000-0x1fff] [ 1.077591] pci_bus 0000:00: root bus resource [mem 0xfffffffff4000000-0xfffffffff47fffff] (bus address [0xf4000000-0xf47fffff]) [ 1.081590] pci_bus 0000:00: root bus resource [bus 00] [ 1.085776] pci 0000:00:0c.0: [1011:0019] type 00 class 0x020000 conventional PCI endpoint [ 1.089708] pci 0000:00:0c.0: BAR 0 [io 0x1000-0x107f] [ 1.093643] pci 0000:00:0c.0: BAR 1 [mem 0xfffffffff4008000-0xfffffffff40083ff] [ 1.097871] pci 0000:00:0c.0: ROM [mem 0xfffffffff4040000-0xfffffffff407ffff pref] [ 1.102080] pci 0000:00:0d.0: [11d4:1889] type 00 class 0x040100 conventional PCI endpoint [ 1.105696] pci 0000:00:0d.0: BAR 0 [mem 0xfffffffff400c000-0xfffffffff400c1ff pref] [ 1.109643] pci 0000:00:0d.0: BAR 1 [mem 0xfffffffff400b000-0xfffffffff400b00f pref] [ 1.113643] pci 0000:00:0d.0: BAR 2 [mem 0xfffffffff400a000-0xfffffffff400a00f pref] [ 1.117643] pci 0000:00:0d.0: BAR 3 [mem 0xfffffffff4009000-0xfffffffff400900f pref] [ 1.121972] pci 0000:00:0d.0: supports D2 [ 1.125962] PCI: Enabled native mode for NS87415 (pif=0x8f) [ 1.129587] pci 0000:00:0e.0: [100b:0002] type 00 class 0x01018f conventional PCI endpoint [ 1.133690] pci 0000:00:0e.0: BAR 0 [io 0x0f00-0x0f07] [ 1.137645] pci 0000:00:0e.0: BAR 1 [io 0x0e00-0x0e03] [ 1.141645] pci 0000:00:0e.0: BAR 2 [io 0x0d00-0x0d07] [ 1.145645] pci 0000:00:0e.0: BAR 3 [io 0x0b00-0x0b03] [ 1.149646] pci 0000:00:0e.0: BAR 4 [io 0x0a00-0x0a0f] [ 1.154116] pci 0000:00:0e.1: [100b:000e] type 00 class 0x068000 conventional PCI endpoint [ 1.158416] pci 0000:00:0e.2: [100b:0012] type 00 class 0x0c0310 conventional PCI endpoint [ 1.161698] pci 0000:00:0e.2: BAR 0 [mem 0xfffffffff4007000-0xfffffffff4007fff] [ 1.165644] pci 0000:00:0e.2: BAR 1 [mem 0xfffffffff4006000-0xfffffffff4006fff] [ 1.170325] pci 0000:00:0f.0: [1000:000b] type 00 class 0x010000 conventional PCI endpoint [ 1.173696] pci 0000:00:0f.0: BAR 0 [io 0x0900-0x09ff] [ 1.177676] pci 0000:00:0f.0: BAR 1 [mem 0xfffffffff4005000-0xfffffffff40053ff 64bit] [ 1.181676] pci 0000:00:0f.0: BAR 3 [mem 0xfffffffff4002000-0xfffffffff4003fff 64bit] [ 1.185915] pci 0000:00:0f.0: supports D1 D2 [ 1.190129] pci 0000:00:0f.1: [1000:000b] type 00 class 0x010000 conventional PCI endpoint [ 1.193696] pci 0000:00:0f.1: BAR 0 [io 0x0800-0x08ff] [ 1.197676] pci 0000:00:0f.1: BAR 1 [mem 0xfffffffff4004000-0xfffffffff40043ff 64bit] [ 1.201678] pci 0000:00:0f.1: BAR 3 [mem 0xfffffffff4000000-0xfffffffff4001fff 64bit] [ 1.205915] pci 0000:00:0f.1: supports D1 D2 [ 1.210478] Elroy version TR4.0 (0x5) found at 0xfffffffffed32000 [ 1.213850] LBA 10:1: PCI host bridge to bus 0000:01 [ 1.217626] pci_bus 0000:01: root bus resource [io 0x12000-0x13fff] (bus address [0x2000-0x3fff]) [ 1.221619] pci_bus 0000:01: root bus resource [mem 0xfffffffff8000000-0xfffffffff9ffffff] (bus address [0xf8000000-0xf9ffffff]) [ 1.225590] pci_bus 0000:01: root bus resource [mem 0xfffffffff4800000-0xfffffffff4ffffff] (bus address [0xf4800000-0xf4ffffff]) [ 1.229587] pci_bus 0000:01: root bus resource [bus 01] [ 1.233682] pci 0000:01:04.0: [103c:1005] type 00 class 0x038000 conventional PCI endpoint [ 1.237686] pci 0000:01:04.0: BAR 0 [mem 0xfffffffff8000000-0xfffffffff9ffffff] [ 1.241923] pci 0000:01:04.0: ROM [mem 0xfffffffff4800000-0xfffffffff480ffff pref] [ 1.246132] iosapic: hpa not registered for 0000:01:04.0 [ 1.249632] Elroy version TR4.0 (0x5) found at 0xfffffffffed38000 [ 1.253724] LBA 10:4: PCI host bridge to bus 0000:02 [ 1.257590] pci_bus 0000:02: root bus resource [io 0x28000-0x29fff] (bus address [0x8000-0x9fff]) [ 1.261590] pci_bus 0000:02: root bus resource [mem 0xfffffffff6000000-0xfffffffff67fffff] (bus address [0xf6000000-0xf67fffff]) [ 1.265587] pci_bus 0000:02: root bus resource [bus 02] [ 1.269880] Elroy version TR4.0 (0x5) found at 0xfffffffffed3c000 [ 1.273694] LBA 10:6: PCI host bridge to bus 0000:03 [ 1.277590] pci_bus 0000:03: root bus resource [io 0x3c000-0x3dfff] (bus address [0xc000-0xdfff]) [ 1.281590] pci_bus 0000:03: root bus resource [mem 0xfffffffffa000000-0xfffffffffbffffff] (bus address [0xfa000000-0xfbffffff]) [ 1.285589] pci_bus 0000:03: root bus resource [mem 0xfffffffff7000000-0xfffffffff77fffff] (bus address [0xf7000000-0xf77fffff]) [ 1.289587] pci_bus 0000:03: root bus resource [bus 03] [ 1.293655] pci 0000:03:02.0: [103c:1008] type 00 class 0x038000 conventional PCI endpoint [ 1.297701] pci 0000:03:02.0: BAR 0 [mem 0xfffffffffa000000-0xfffffffffbffffff 64bit] [ 1.301831] pci 0000:03:02.0: ROM [mem 0xfffffffff7000000-0xfffffffff71fffff pref] [ 1.306143] iosapic: hpa not registered for 0000:03:02.0 [ 1.311771] led: LCD display at 0xfffffff0f05d0008 and 0xfffffff0f05d0000 [ 1.317583] powersw: Soft power switch at 0xfffffff0f0400804 enabled. [ 1.338261] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 1.341586] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [ 1.362563] iommu: Default domain type: Translated [ 1.365587] iommu: DMA domain TLB invalidation policy: strict mode [ 1.378076] pps_core: LinuxPPS API ver. 1 registered [ 1.381586] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.395441] PTP clock support registered [ 1.400422] NetLabel: Initializing [ 1.401590] NetLabel: domain hash size = 128 [ 1.405585] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 1.421759] NetLabel: unlabeled traffic allowed by default [ 1.430623] vgaarb: loaded [ 1.435873] clocksource: Switched to clocksource cr16 [ 1.505785] VFS: Disk quotas dquot_6.6.0 [ 1.560789] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.653354] AppArmor: AppArmor Filesystem Enabled [ 1.727956] NET: Registered PF_INET protocol family [ 1.792986] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 1.895944] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 24576 bytes, linear) [ 2.008790] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 2.111018] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 2.217621] TCP bind hash table entries: 16384 (order: 7, 786432 bytes, linear) [ 2.315448] TCP: Hash tables configured (established 16384 bind 16384) [ 2.403168] MPTCP token hash table entries: 2048 (order: 4, 81920 bytes, linear) [ 2.500920] UDP hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 2.589308] UDP-Lite hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 2.683928] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 2.758423] NET: Registered PF_XDP protocol family [ 2.821385] PCI: CLS 16 bytes [ 2.860484] SuperIO: Found NS87560 Legacy I/O device at 0000:00:0e.1 (IRQ 68) [ 2.954423] SuperIO: Serial port 1 at 0x3f8 [ 3.009418] SuperIO: Serial port 2 at 0x2f8 [ 3.064438] SuperIO: Parallel port at 0x378 [ 3.119451] SuperIO: Floppy controller at 0x3f0 [ 3.179044] SuperIO: ACPI at 0x7e0 [ 3.223883] SuperIO: USB regulator enabled [ 3.277776] pci 0000:00:0e.1: superio_init+0x0/0x790 took 407553 usecs [ 3.365251] Trying to unpack rootfs image as initramfs... [ 3.438293] Enabling PDC chassis warnings support v0.05 [ 3.518530] Performance monitoring counters enabled for Allegro W2 [32] [ 3.697244] Initialise system trusted keyrings [ 3.819300] Key type blacklist registered [ 3.922082] workingset: timestamp_bits=46 max_order=19 bucket_order=0 [ 4.097873] zbud: loaded [ 4.164215] fuse: init (API version 7.41) [ 4.274440] integrity: Platform Keyring initialized [ 4.404605] Key type asymmetric registered [ 4.510192] Asymmetric key parser 'x509' registered [ 4.639223] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 4.838365] io scheduler mq-deadline registered [ 4.968879] ledtrig-cpu: registered to indicate activity on CPUs [ 9.762323] Freeing initrd memory: 26684K [ 9.816164] process '/usr/bin/kmod' started with executable stack [ 9.920510] PDC Stable Storage facility v0.30 [ 10.378960] sticore: STI GSC/PCI core graphics driver Version 0.9c [ 10.460546] sti 0000:01:04.0: enabling SERR and PARITY (0002 -> 0142) [ 10.545354] sticore: STI PCI graphic ROM found at fffffffff4800000 (64 kB), fb at fffffffff8000000 (32 MB) [ 10.746855] sticore: STI word mode ROM supports 32 bit firmware functions. [ 10.837344] sticore: id 2d08c0a7-9a02587, conforms to spec rev. 8.0a [ 10.923245] sticore: built-in font #1: size 8x16, chars 0-255, bpc 16 [ 11.012581] sticore: built-in font #2: size 6x13, chars 0-255, bpc 13 [ 11.101915] sticore: built-in font #3: size 10x20, chars 0-255, bpc 40 [ 11.192412] sticore: using 8x16 framebuffer font VGA8x16 [ 11.266922] sticore: using 32-bit STI ROM functions [ 11.337315] sticore: graphics card name: PCI_GRAFFITIX1280 [ 11.414023] sticore: located at [10/1/4/0] [ 11.472571] sticore: STI PCI graphic ROM found at fffffffff7000000 (2048 kB), fb at fffffffffa000000 (32 MB) [ 11.665414] sticore: STI word mode ROM supports 32 and 64 bit firmware functions. [ 11.763874] sticore: id 35acda30-9a02587, conforms to spec rev. 8.0d [ 11.849803] sticore: built-in font #1: size 10x20, chars 0-255, bpc 40 [ 11.940257] sticore: built-in font #2: size 8x16, chars 0-255, bpc 16 [ 12.029599] sticore: using 8x16 framebuffer font VGA8x16 [ 12.104157] sticore: using 64-bit STI ROM functions [ 12.297899] sticore: graphics card name: A1299B [ 12.362079] sticore: located at [10/6/2/0] [ 12.420591] sticon: Initializing STI text console on PCI_GRAFFITIX1280 at [10/1/4/0] [ 12.524900] Console: switching consoles 1-63 to colour STI console 160x64 [ 13.641927] fbcon: stifb (fb0) is primary device [ 13.726748] Console: switching to colour frame buffer device 160x64 [ 13.954525] fb0: stifb 1280x1024-8 frame buffer device, PCI_GRAFFITIX1280, id: 2d08c0a7, mmio: 0xfffffffff8100000 [ 14.089619] stifb: 'A1299B' (id: 0x35acda30) not supported. [ 14.163387] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 14.246273] serial8250: ttyS0 at I/O 0x3f8 (irq = 3, base_baud = 115200) is a 16550A [ 14.348233] printk: legacy console [ttyS0] enabled [ 14.348233] printk: legacy console [ttyS0] enabled [ 14.468685] printk: legacy bootconsole [pdc0] disabled [ 14.468685] printk: legacy bootconsole [pdc0] disabled [ 14.598490] serial8250: ttyS1 at I/O 0x2f8 (irq = 4, base_baud = 115200) is a 16550A [ 14.693201] Linux agpgart interface v0.103 [ 14.742226] quicksilver: No Pluto found, so no AGPGART for you. [ 14.814039] mousedev: PS/2 mouse device common for all mice [ 14.882826] rtc-generic rtc-generic: registered as rtc0 [ 14.947113] rtc-generic rtc-generic: setting system clock to 2025-01-24T23:04:20 UTC (1737759860) [ 15.055649] NET: Registered PF_INET6 protocol family [ 15.230025] Segment Routing with IPv6 [ 15.274265] In-situ OAM (IOAM) with IPv6 [ 15.321475] mip6: Mobile IPv6 [ 15.357117] NET: Registered PF_PACKET protocol family [ 15.417832] mpls_gso: MPLS GSO support [ 15.486192] registered taskstats version 1 [ 15.536381] Loading compiled-in X.509 certificates [ 15.663988] Loaded X.509 cert 'Build time autogenerated kernel key: 2508d2f15df3ec1dad62d8ebdee106005ba94a36' [ 15.805405] Key type .fscrypt registered [ 15.852403] Key type fscrypt-provisioning registered [ 16.191647] Key type encrypted registered [ 16.239830] AppArmor: AppArmor sha256 policy hashing enabled [ 16.307792] ima: No TPM chip found, activating TPM-bypass! [ 16.375653] ima: Allocated hash algorithm: sha256 [ 16.432088] ima: No architecture policies found [ 16.486534] evm: Initialising EVM extended attributes: [ 16.548050] evm: security.selinux [ 16.587772] evm: security.SMACK64 (disabled) [ 16.638943] evm: security.SMACK64EXEC (disabled) [ 16.694268] evm: security.SMACK64TRANSMUTE (disabled) [ 16.754798] evm: security.SMACK64MMAP (disabled) [ 16.810136] evm: security.apparmor [ 16.850899] evm: security.ima [ 16.886459] evm: security.capability [ 16.929306] evm: HMAC attrs: 0x1 [ 16.968821] Unstable clock detected, switching default tracing clock to "global" [ 16.968821] If you want to keep using the local clock, then add: [ 16.968821] "trace_clock=local" [ 16.968821] on the kernel command line [ 20.610104] Freeing unused kernel image (initmem) memory: 2048K [ 20.681415] Write protecting the kernel read-only data: 2584k [ 20.751466] Run /init as init process Loading, please wait... Starting systemd-udevd version 257~rc3-1 [ 22.216071] Kernel: unaligned access to 0x4f9e03 in check_version+0xb4/0x1f0 (iir 0xd2010d7) [ 22.326327] Kernel: unaligned access to 0x4e484a in check_version+0xb4/0x1f0 (iir 0xd2010d7) [ 22.430661] Kernel: unaligned access to 0x961e6a in check_version+0xb4/0x1f0 (iir 0xd2010d7) [ 22.568970] Kernel: unaligned access to 0x4fa2b3 in module_frob_arch_sections+0x8c/0x340 (iir 0x715c06f0) [ 22.683694] Kernel: unaligned access to 0x4fa2b3 in module_frob_arch_sections+0x20c/0x340 (iir 0x515c06f0) [ 22.814097] tulip alternatives: applied 4 out of 4 patches [ 22.956734] tulip0: no phy info, aborting mtable build [ 23.018950] tulip0: MII transceiver #1 config 1000 status 782d advertising 01e1 [ 23.180906] usbcore alternatives: applied 20 out of 20 patches [ 23.259045] usbcore: registered new interface driver usbfs [ 23.351461] net eth0: Digital DS21142/43 Tulip rev 65 at MMIO 0xfffffffff4008000, 00:30:6e:48:aa:64, IRQ 66 [ 23.503851] usbcore: registered new interface driver hub [ 23.641902] usbcore: registered new device driver usb [ 23.703022] scsi_mod alternatives: applied 7 out of 7 patches [ 23.828398] SCSI subsystem initialized [ 23.998215] ehci_hcd alternatives: applied 132 out of 132 patches [ 24.380418] libata alternatives: applied 3 out of 3 patches [ 24.467594] sym53c8xx alternatives: applied 26 out of 26 patches [ 24.565243] ohci_hcd alternatives: applied 140 out of 140 patches [ 24.890585] sym0: <896> rev 0x7 at pci 0000:00:0f.0 irq 69 [ 25.051146] pata_ns87415 alternatives: applied 1 out of 1 patches [ 25.172272] ehci_pci alternatives: applied 2 out of 2 patches [ 25.246551] scsi host0: pata_ns87415 [ 25.314115] scsi host1: pata_ns87415 [ 25.410171] ata1: PATA max MWDMA2 cmd 0xf00 ctl 0xe00 bmdma 0xa00 irq 7 lpm-pol 0 [ 25.499822] ata2: PATA max MWDMA2 cmd 0xd00 ctl 0xb00 bmdma 0xa08 irq 7 lpm-pol 0 [ 25.601342] ohci-pci 0000:00:0e.2: OHCI PCI host controller [ 25.671900] sym0: PA-RISC Firmware, ID 7, Fast-40, SE, parity checking [ 25.768167] ohci-pci 0000:00:0e.2: new USB bus registered, assigned bus number 1 [ 25.869581] sym0: SCSI BUS has been reset. [ 25.922489] sym0: SCSI BUS mode change from SE to SE. [ 25.926455] sym0: SCSI BUS has been reset. [ 26.034485] scsi host2: sym-2.2.3 [ 26.075056] ata1.00: ATAPI: R/RW 4x4x32, 1.3B, max MWDMA2 [ 26.144614] ohci-pci 0000:00:0e.2: irq 1, io mem 0xfffffffff4007000 [ 26.454608] sym1: <896> rev 0x7 at pci 0000:00:0f.1 irq 69 [ 26.520541] scsi 0:0:0:0: CD-ROM IDE-CD R/RW 4x4x32 1.3B PQ: 0 ANSI: 5 [ 26.618087] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12 [ 26.717196] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 26.803782] usb usb1: Product: OHCI PCI host controller [ 26.866452] usb usb1: Manufacturer: Linux 6.12.3-parisc64 ohci_hcd [ 26.940586] usb usb1: SerialNumber: 0000:00:0e.2 [ 27.001214] sym1: PA-RISC Firmware, ID 7, Fast-40, LVD, parity checking [ 27.085580] sym1: SCSI BUS has been reset. [ 27.137288] scsi host3: sym-2.2.3 [ 27.189800] hub 1-0:1.0: USB hub found [ 27.235407] hub 1-0:1.0: 3 ports detected [ 27.581634] usb 1-1: new low-speed USB device number 2 using ohci-pci [ 27.873797] usb 1-1: New USB device found, idVendor=046a, idProduct=0023, bcdDevice= 0.32 [ 27.971785] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 28.241612] usb 1-2: new low-speed USB device number 3 using ohci-pci [ 28.538781] usb 1-2: New USB device found, idVendor=046d, idProduct=c03e, bcdDevice=20.00 [ 28.636757] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 28.722212] usb 1-2: Product: USB-PS/2 Optical Mouse [ 28.781699] usb 1-2: Manufacturer: Logitech [ 31.769117] scsi 3:0:5:0: Direct-Access COMPAQ BF14688577 HPB2 PQ: 0 ANSI: 3 [ 31.866098] scsi target3:0:5: tagged command queuing enabled, command queue depth 16. [ 31.969616] scsi target3:0:5: Beginning Domain Validation [ 32.042097] scsi target3:0:5: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31) [ 32.134127] scsi target3:0:5: Domain Validation skipping write tests [ 32.210247] scsi target3:0:5: Ending Domain Validation [ 32.274404] scsi 3:0:6:0: Direct-Access HP 36.4G ST336607LC HPC3 PQ: 0 ANSI: 3 [ 32.371347] scsi target3:0:6: tagged command queuing enabled, command queue depth 16. [ 32.473606] scsi target3:0:6: Beginning Domain Validation [ 32.543686] scsi target3:0:6: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31) [ 32.634032] scsi target3:0:6: Domain Validation skipping write tests [ 32.710172] scsi target3:0:6: Ending Domain Validation [ 35.394643] handle_unaligned: 2762 callbacks suppressed [ 35.394679] Kernel: unaligned access to 0x0fa0fe in check_version+0xb4/0x1f0 (iir 0xd2010d7) [ 35.611751] Kernel: unaligned access to 0x1d3cbe in check_version+0xb4/0x1f0 (iir 0xd2010d7) [ 35.758403] Kernel: unaligned access to 0x211d95 in check_version+0xb4/0x1f0 (iir 0xd2010d7) [ 35.859588] Kernel: unaligned access to 0x1d500e in module_frob_arch_sections+0x8c/0x340 (iir 0x715c06f0) [ 35.974223] Kernel: unaligned access to 0x1d500e in module_frob_arch_sections+0x20c/0x340 (iir 0x515c06f0) [ 36.109257] hid alternatives: applied 8 out of 8 patches [ 36.178126] hid: raw HID events driver (C) Jiri Kosina [ 36.373780] sd 3:0:6:0: Power-on or device reset occurred [ 36.439563] sd 3:0:5:0: Power-on or device reset occurred [ 36.520957] sd 3:0:6:0: [sdb] 71132960 512-byte logical blocks: (36.4 GB/33.9 GiB) [ 36.611652] sd 3:0:5:0: [sda] 286749488 512-byte logical blocks: (147 GB/137 GiB) [ 36.732709] usbhid alternatives: applied 1 out of 1 patches [ 36.804181] sd 3:0:5:0: [sda] Write Protect is off [ 36.861591] sd 3:0:6:0: [sdb] Write Protect is off [ 36.943858] sd 3:0:5:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 37.047131] sd 3:0:6:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 37.172919] usbcore: registered new interface driver usbhid [ 37.239707] usbhid: USB HID core driver [ 37.297830] sd 3:0:6:0: [sdb] Attached SCSI disk [ 37.368209] sda: sda1 sda2 sda3 < sda5 sda6 > [ 37.428081] sd 3:0:5:0: [sda] Attached SCSI disk [ 37.769395] input: Logitech USB-PS/2 Optical Mouse as /devices/parisc/10/10:0/pci0000:00/0000:00:0e.2/usb1/1-2/1-2:1.0/0003:046D:C03E.0003/input/input0 [ 37.932483] sr 0:0:0:0: [sr0] scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray [ 38.027382] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 38.091216] hid-generic 0003:046D:C03E.0003: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0e.2-2/input0 [ 38.501742] input: HID 046a:0023 as /devices/parisc/10/10:0/pci0000:00/0000:00:0e.2/usb1/1-1/1-1:1.0/0003:046A:0023.0001/input/input1 [ 38.853121] cherry 0003:046A:0023.0001: input,hidraw1: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:0e.2-1/input0 [ 39.118074] input: HID 046a:0023 as /devices/parisc/10/10:0/pci0000:00/0000:00:0e.2/usb1/1-1/1-1:1.1/0003:046A:0023.0002/input/input2 [ 39.434646] cherry 0003:046A:0023.0002: input,hidraw2: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:0e.2-1/input1 Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ..[ 39.832989] random: crng init done . Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. Begin: Will now check root file system ... fsck from util-linux 2.40.2 [/sbin/fsck.ext4 (1) -- /dev/sda5] fsck.ext4 -a -C0 /dev/sda5 ROOT: clean, 185089/8626176 files, 12038199/34490624 blocks done. [ 40.421542] handle_unaligned: 1717 callbacks suppressed [ 40.484255] Kernel: unaligned access to 0x2e7d7b in check_version+0xb4/0x1f0 (iir 0xd2010d7) [ 40.585419] Kernel: unaligned access to 0x2ebfa4 in module_frob_arch_sections+0x8c/0x340 (iir 0x715c06f0) [ 40.700101] Kernel: unaligned access to 0x2ebfa4 in module_frob_arch_sections+0x20c/0x340 (iir 0x515c06f0) [ 40.815717] Kernel: unaligned access to 0x2ebfa4 in module_frob_arch_sections+0x20c/0x340 (iir 0x515c06f0) [ 40.931340] Kernel: unaligned access to 0x2ebfa4 in module_frob_arch_sections+0x20c/0x340 (iir 0x515c06f0) [ 41.057237] jbd2 alternatives: applied 21 out of 21 patches [ 41.587624] ext4 alternatives: applied 155 out of 155 patches [ 41.717516] EXT4-fs (sda5): mounted filesystem 167c52a5-f5a7-498c-8b35-b30314a44351 ro with ordered data mode. Quota mode: none. done. Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. [ 42.498160] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 43.639672] systemd[1]: Inserted module 'autofs4' [ 43.802183] x_tables alternatives: applied 2 out of 2 patches [ 43.959082] ip_tables alternatives: applied 5 out of 5 patches p104[ 44.258084] systemd[1]: systemd 257~rc3-1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +IPE +SMACK -SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -BTF -XKBCOMMON -UTMP +SYSVINIT +LIBARCHIVE) [ 44.662048] systemd[1]: Detected architecture parisc64. Welcome to Debian GNU/Linux trixie/sid! [ 44.864839] systemd[1]: Hostname set to . Debian GNU/Linux trixie/sid c3000 ttyS0 c3000 login: root Password: Linux c3000 6.12.3-parisc64 #1 SMP Debian 6.12.3-1 (2024-12-07) parisc64 The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. root@c3000:~# lspci 00:0c.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 41) 00:0d.0 Multimedia audio controller: Analog Devices Device 1889 00:0e.0 IDE interface: National Semiconductor Corporation 87415/87560 IDE (rev 03) 00:0e.1 Bridge: National Semiconductor Corporation 87560 Legacy I/O (rev 01) 00:0e.2 USB controller: National Semiconductor Corporation USB Controller (rev 02) 00:0f.0 SCSI storage controller: Broadcom / LSI 53C896/897 (rev 07) 00:0f.1 SCSI storage controller: Broadcom / LSI 53C896/897 (rev 07) 01:04.0 Display controller: Hewlett-Packard Company A4977A Visualize EG (rev 03) 03:02.0 Display controller: Hewlett-Packard Company Visualize FX (rev 02) root@c3000:~# lspci --vv 00:0c.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 41) Subsystem: Hewlett-Packard Company Device 104f Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR-