[ 0.000000] Linux version 4.15.0-3-parisc64-smp (debian-kernel@lists.debian.org) (gcc version 7.3.0 (GCC)) #1 SMP Debian 4.15.17-1 (2018-04-19) [ 0.000000] unwind_init: start = 0x40f654e4, end = 0x40fc7004, entries = 25010 [ 0.000000] CPU0: thread -1, cpu 0, socket 0 [ 0.000000] FP[0] enabled: Rev 1 Model 20 [ 0.000000] The 64-bit Kernel has started... [ 0.000000] Kernel default page size is 4 KB. Huge pages enabled with 1 MB physical and 2 MB virtual size. [ 0.000000] bootconsole [ttyB0] enabled [ 0.000000] Initialized PDC Console for debugging. [ 0.000000] Determining PDC firmware type: 64 bit PAT. [ 0.000000] PAT: Running on cell 0 and location 1. [ 0.000000] model 000089b0 00000491 00000000 00000002 5737c9e22415d308 100000f0 00000008 000000b2 000000b2 [ 0.000000] random: fast init done [ 0.000000] vers 00000401 [ 0.000000] CPUID vers 20 rev 10 (0x0000028a) [ 0.000000] capabilities 0x35 [ 0.000000] model 9000/785/C8000 [ 0.000000] parisc_cache_init: Only equivalent aliasing supported! [ 0.000000] Memory Ranges: [ 0.000000] 0) Start 0x0000000000000000 End 0x000000003fffffff Size 1024 MB [ 0.000000] 1) Start 0x0000000100000000 End 0x00000002ffdfffff Size 8190 MB [ 0.000000] 2) Start 0x0000004040000000 End 0x00000040ffffffff Size 3072 MB [ 0.000000] Total Memory: 12286 MB [ 0.000000] initrd: 7e9a6000-7ffee271 [ 0.000000] initrd: reserving 3e9a6000-3ffee271 (mem_max 2ffe00000) [ 0.000000] PDT: type PDT_PAT_NEW, size 3000, entries 1, status 0, dbe_loc 0x285c30900, good_mem 0 MB [ 0.000000] PDT: Firmware reports 1 entries of faulty memory: [ 0.000000] PDT: BAD MEMORY at 0x285c30900, DIMM slot 0a, permanent multi-bit error. [ 0.000000] On node 0 totalpages: 262144 [ 0.000000] Normal zone: 4096 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 262144 pages, LIFO batch:31 [ 0.000000] On node 1 totalpages: 2096640 [ 0.000000] Normal zone: 32760 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 2096640 pages, LIFO batch:31 [ 0.000000] On node 2 totalpages: 786432 [ 0.000000] Normal zone: 12288 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 786432 pages, LIFO batch:31 [ 0.000000] percpu: Embedded 27 pages/cpu @ (ptrval) s71648 r8192 d30752 u110592 [ 0.000000] pcpu-alloc: s71648 r8192 d30752 u110592 alloc=27*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 0.000000] SMP: bootstrap CPU ID is 0 [ 0.000000] Built 3 zonelists, mobility grouping on. Total pages: 3096072 [ 0.000000] Kernel command line: root=LABEL=ROOT_SSD ssdroot=/dev/sdc2 ideroot=/dev/sda3_or_LABEL_ROOT_IDE HOME=/ panic_timeout=60 panic=-1 clocksource=jiffies net.ifnames=0 console=ttyS0 TERM=vt102 palo_kernel=2/vmlinux [ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Memory: 12292940K/12580864K available (10740K kernel code, 4086K rwdata, 1411K rodata, 1024K init, 844K bss, 287924K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=16, Order=0-3, MinObjects=0, CPUs=8, Nodes=8 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS: 128 [ 0.000010] sched_clock: 64 bits at 1000MHz, resolution 1ns, wraps every 4398046511103ns [ 0.104302] Console: colour dummy device 160x64 [ 0.164089] Calibrating delay loop... 1988.60 BogoMIPS (lpj=3977216) [ 0.280011] pid_max: default: 32768 minimum: 301 [ 0.344439] Security Framework initialized [ 0.396025] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.484141] AppArmor: AppArmor initialized [ 0.540488] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.632049] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.730350] Hierarchical SRCU implementation. [ 0.789486] smp: Bringing up secondary CPUs ... [ 0.848023] smp: Brought up 3 nodes, 1 CPU [ 0.908302] devtmpfs: initialized [ 0.954098] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 1.080068] futex hash table entries: 2048 (order: 4, 65536 bytes) [ 1.188049] NET: Registered protocol family 16 [ 1.244303] audit: initializing netlink subsys (disabled) [ 1.316987] EISA bus registered [ 1.360053] audit: type=2000 audit(1524295039.316:1): state=initialized audit_enabled=0 res=1 [ 1.472190] Searching for devices... [ 1.636018] Found devices: [ 1.668030] 1. Crestone Peak Mako+ Slow at 0xfffffffffe780000 [128] { 0, 0x0, 0x89b, 0x00004 } [ 1.784026] 2. Crestone Peak Mako+ Slow at 0xfffffffffe781000 [129] { 0, 0x0, 0x89b, 0x00004 } [ 1.896046] 3. Crestone Peak Mako+ Slow at 0xfffffffffe798000 [152] { 0, 0x0, 0x89b, 0x00004 } [ 2.012024] 4. Crestone Peak Mako+ Slow at 0xfffffffffe799000 [153] { 0, 0x0, 0x89b, 0x00004 } [ 2.124022] 5. Memory at 0xfffffffffed08000 [8] { 1, 0x0, 0x0b6, 0x00009 } [ 2.216028] 6. Pluto BC McKinley Port at 0xfffffffffed00000 [0] { 12, 0x0, 0x880, 0x0000c } [ 2.324024] 7. Mercury PCI Bridge at 0xfffffffffed20000 [0/0] { 13, 0x0, 0x783, 0x0000a } [ 2.432024] 8. Mercury PCI Bridge at 0xfffffffffed24000 [0/2] { 13, 0x0, 0x783, 0x0000a } [ 2.540025] 9. Mercury PCI Bridge at 0xfffffffffed26000 [0/3] { 13, 0x0, 0x783, 0x0000a } [ 2.648025] 10. Quicksilver AGP Bridge at 0xfffffffffed28000 [0/4] { 13, 0x0, 0x784, 0x0000a } [ 2.764024] 11. BMC IPMI Mgmt Ctlr at 0xfffffff0f05b0000 [16] { 15, 0x0, 0x004, 0x000c0 } [ 2.872023] 12. Crestone Peak Core RS-232 at 0xfffffff0f05e0000 [17] { 10, 0x0, 0x076, 0x000ad } [ 2.988023] 13. Crestone Peak Core RS-232 at 0xfffffff0f05e2000 [18] { 10, 0x0, 0x076, 0x000ad } [ 3.104022] Enabling PDC_PAT chassis codes support v0.05 [ 4.076031] Logical CPU #0 is physical cpu #0 at location 0xffff0000ffff15 with hpa 0xfffffffffe780000 [ 4.204014] Logical CPU #1 is physical cpu #1 at location 0xffff0000ffff15 with hpa 0xfffffffffe781000 [ 4.328023] CPU1: thread -1, cpu 1, socket 0 [ 4.384869] Releasing cpu 1 now, hpa=fffffffffe781000 [ 4.896026] Logical CPU #2 is physical cpu #2 at location 0xffff0001ffff15 with hpa 0xfffffffffe798000 [ 5.020029] CPU2: thread -1, cpu 0, socket 1 [ 5.076881] Releasing cpu 2 now, hpa=fffffffffe798000 [ 5.608024] Logical CPU #3 is physical cpu #3 at location 0xffff0001ffff15 with hpa 0xfffffffffe799000 [ 5.732037] CPU3: thread -1, cpu 1, socket 1 [ 5.788291] Releasing cpu 3 now, hpa=fffffffffe799000 [ 6.328448] CPU(s): 4 out of 4 PA8900 (Shortfin) at 1000.000000 MHz online [ 6.438871] Whole cache flush 9651904 cycles, flushing 17825792 bytes 8492908 cycles [ 6.438885] Cache flush threshold set to 19783 KiB [ 6.504716] Whole TLB flush 25471 cycles, flushing 17825792 bytes 2558477 cycles [ 6.504722] TLB flush threshold set to 696 KiB [ 6.752155] SBA found Pluto 2.3 at 0xfffffffffed00000 [ 7.152141] sba_ioc_init_pluto: reserving 512Mb of IOVA space for agpgart [ 7.308112] Mercury version TR3.2 (0x32) found at 0xfffffffffed20000 [ 7.468050] LBA: lmmio_space [0xffffffff80000000-0xffffffff9fffffff] - new [ 7.628467] LBA 0:0: PCI host bridge to bus 0000:00 [ 7.692080] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 7.776030] pci_bus 0000:00: root bus resource [mem 0xffffffff80000000-0xffffffff9fffffff] (bus address [0x80000000-0x9fffffff]) [ 7.928035] pci_bus 0000:00: root bus resource [bus 00-07] [ 8.064111] Mercury version TR3.2 (0x32) found at 0xfffffffffed24000 [ 8.296078] LBA 0:2: PCI host bridge to bus 0000:40 [ 8.360039] pci_bus 0000:40: root bus resource [io 0x10000-0x1ffff] (bus address [0x0000-0xffff]) [ 8.480042] pci_bus 0000:40: root bus resource [mem 0xffffffffa0000000-0xffffffffafffffff] (bus address [0xa0000000-0xafffffff]) [ 8.632047] pci_bus 0000:40: root bus resource [bus 40-47] [ 8.704037] pci 0000:40:01.0: [1000:0030] type 00 class 0x010000 [ 8.704109] pci 0000:40:01.0: reg 0x10: [io 0x14100-0x141ff] [ 8.704142] pci 0000:40:01.0: reg 0x14: [mem 0xffffffffa0260000-0xffffffffa027ffff 64bit] [ 8.704174] pci 0000:40:01.0: reg 0x1c: [mem 0xffffffffa0240000-0xffffffffa025ffff 64bit] [ 8.704213] pci 0000:40:01.0: reg 0x30: [mem 0xffffffffa0100000-0xffffffffa01fffff pref] [ 8.704313] pci 0000:40:01.0: supports D1 D2 [ 8.704594] pci 0000:40:01.1: [1000:0030] type 00 class 0x010000 [ 8.704644] pci 0000:40:01.1: reg 0x10: [io 0x14000-0x140ff] [ 8.704676] pci 0000:40:01.1: reg 0x14: [mem 0xffffffffa0220000-0xffffffffa023ffff 64bit] [ 8.704707] pci 0000:40:01.1: reg 0x1c: [mem 0xffffffffa0200000-0xffffffffa021ffff 64bit] [ 8.704745] pci 0000:40:01.1: reg 0x30: [mem 0xffffffffa0000000-0xffffffffa00fffff pref] [ 8.704819] pci 0000:40:01.1: supports D1 D2 [ 8.772116] Mercury version TR3.2 (0x32) found at 0xfffffffffed26000 [ 9.000526] LBA 0:3: PCI host bridge to bus 0000:60 [ 9.068045] pci_bus 0000:60: root bus resource [io 0x20000-0x2ffff] (bus address [0x0000-0xffff]) [ 9.184055] pci_bus 0000:60: root bus resource [mem 0xffffffffb0000000-0xffffffffbfffffff] (bus address [0xb0000000-0xbfffffff]) [ 9.336032] pci_bus 0000:60: root bus resource [bus 60-67] [ 9.408111] pci 0000:60:01.0: [1033:0035] type 00 class 0x0c0310 [ 9.408179] pci 0000:60:01.0: reg 0x10: [mem 0xffffffffb0124000-0xffffffffb0124fff] [ 9.408354] pci 0000:60:01.0: supports D1 D2 [ 9.408362] pci 0000:60:01.0: PME# supported from D0 D1 D2 D3hot [ 9.408642] pci 0000:60:01.1: [1033:0035] type 00 class 0x0c0310 [ 9.408688] pci 0000:60:01.1: reg 0x10: [mem 0xffffffffb0123000-0xffffffffb0123fff] [ 9.408836] pci 0000:60:01.1: supports D1 D2 [ 9.408843] pci 0000:60:01.1: PME# supported from D0 D1 D2 D3hot [ 9.409096] pci 0000:60:01.2: [1033:00e0] type 00 class 0x0c0320 [ 9.409143] pci 0000:60:01.2: reg 0x10: [mem 0xffffffffb0122000-0xffffffffb01220ff] [ 9.409293] pci 0000:60:01.2: supports D1 D2 [ 9.409300] pci 0000:60:01.2: PME# supported from D0 D1 D2 D3hot [ 9.409563] pci 0000:60:02.0: [1095:0680] type 00 class 0x010185 [ 9.409610] pci 0000:60:02.0: reg 0x10: [io 0x26078-0x2607f] [ 9.409634] pci 0000:60:02.0: reg 0x14: [io 0x2608c-0x2608f] [ 9.409658] pci 0000:60:02.0: reg 0x18: [io 0x26070-0x26077] [ 9.409682] pci 0000:60:02.0: reg 0x1c: [io 0x26088-0x2608b] [ 9.409706] pci 0000:60:02.0: reg 0x20: [io 0x26050-0x2605f] [ 9.409731] pci 0000:60:02.0: reg 0x24: [mem 0xffffffffb0121000-0xffffffffb01210ff] [ 9.409756] pci 0000:60:02.0: reg 0x30: [mem 0xffffffffb0080000-0xffffffffb00fffff pref] [ 9.409813] pci 0000:60:02.0: supports D1 D2 [ 9.410073] pci 0000:60:03.0: [8086:100e] type 00 class 0x020000 [ 9.410129] pci 0000:60:03.0: reg 0x10: [mem 0xffffffffb0100000-0xffffffffb011ffff] [ 9.410169] pci 0000:60:03.0: reg 0x18: [io 0x26000-0x2603f] [ 9.410318] pci 0000:60:03.0: PME# supported from D0 D3hot D3cold [ 9.412053] pci 0000:60:04.0: [1095:3112] type 00 class 0x018000 [ 9.412100] pci 0000:60:04.0: reg 0x10: [io 0x26068-0x2606f] [ 9.412124] pci 0000:60:04.0: reg 0x14: [io 0x26084-0x26087] [ 9.412148] pci 0000:60:04.0: reg 0x18: [io 0x26060-0x26067] [ 9.412172] pci 0000:60:04.0: reg 0x1c: [io 0x26080-0x26083] [ 9.412195] pci 0000:60:04.0: reg 0x20: [io 0x26040-0x2604f] [ 9.412220] pci 0000:60:04.0: reg 0x24: [mem 0xffffffffb0120000-0xffffffffb01201ff] [ 9.412244] pci 0000:60:04.0: reg 0x30: [mem 0xffffffffb0000000-0xffffffffb007ffff pref] [ 9.412299] pci 0000:60:04.0: supports D1 D2 [ 9.480148] Quicksilver version TR1.0 (0x10) found at 0xfffffffffed28000 [ 9.644050] LBA: lmmio_space [0xffffffffc0000000-0xffffffffdfffffff] - new [ 9.804542] LBA 0:4: PCI host bridge to bus 0000:80 [ 9.868046] pci_bus 0000:80: root bus resource [io 0x30000-0x3ffff] (bus address [0x0000-0xffff]) [ 9.988030] pci_bus 0000:80: root bus resource [mem 0xffffffffc0000000-0xffffffffdfffffff] (bus address [0xc0000000-0xdfffffff]) [ 10.140070] pci_bus 0000:80: root bus resource [bus 80-87] [ 10.728036] powersw: Soft power switch at 0xfffffff0f042e278 enabled. [ 10.817068] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 10.908309] vgaarb: loaded [ 11.000036] VFS: Disk quotas dquot_6.6.0 [ 11.052154] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 11.144892] AppArmor: AppArmor Filesystem Enabled [ 11.216236] NET: Registered protocol family 2 [ 11.272904] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 11.373749] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 11.465537] TCP: Hash tables configured (established 131072 bind 65536) [ 11.552340] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 11.632175] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 11.720865] NET: Registered protocol family 1 [ 11.776075] PCI: CLS 16 bytes [ 11.900599] Unpacking initramfs... [ 13.285273] Freeing initrd memory: 22816K [ 13.340271] clocksource: cr16_unstable: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 13.482045] Chassis warnings not supported. [ 13.540306] Performance monitoring counters enabled for Crestone Peak Mako+ Slow [ 13.640314] Initialise system trusted keyrings [ 13.696243] workingset: timestamp_bits=43 max_order=22 bucket_order=0 [ 13.792532] zbud: loaded [ 19.592050] random: crng init done [ 35.960268] Key type asymmetric registered [ 36.016189] Asymmetric key parser 'x509' registered [ 36.080451] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 36.176297] io scheduler noop registered [ 36.228045] io scheduler deadline registered [ 36.288131] io scheduler cfq registered (default) [ 36.348025] io scheduler mq-deadline registered [ 36.412041] PDC Stable Storage facility v0.30 [ 36.512072] STI GSC/PCI core graphics driver Version 0.9b [ 36.584436] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 36.712558] console [ttyS0] disabled [ 36.780030] 17: ttyS0 at MMIO 0xfffffff0f05e0800 (irq = 74, base_baud = 115200) is a 16550A [ 36.888136] console [ttyS0] enabled [ 36.976060] bootconsole [ttyB0] disabled [ 37.140042] 18: ttyS1 at MMIO 0xfffffff0f05e2800 (irq = 75, base_baud = 115200) is a 16550A [ 37.240371] Linux agpgart interface v0.103 [ 37.288039] quicksilver: IO PDIR shared with sba_iommu [ 37.392260] (null): AGP aperture is 512M @ 0x60000000 [ 37.456406] mousedev: PS/2 mouse device common for all mice [ 37.532149] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0 [ 37.616142] ledtrig-cpu: registered to indicate activity on CPUs [ 37.689288] NET: Registered protocol family 10 [ 37.788685] Segment Routing with IPv6 [ 37.832138] mip6: Mobile IPv6 [ 37.868045] NET: Registered protocol family 17 [ 37.920085] mpls_gso: MPLS GSO support [ 37.964166] registered taskstats version 1 [ 38.016055] Loading compiled-in X.509 certificates [ 40.630150] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630' [ 40.720072] zswap: loaded using pool lzo/zbud [ 40.772178] AppArmor: AppArmor sha1 policy hashing enabled [ 40.840078] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 40.920069] rtc-generic rtc-generic: setting system clock to 2018-04-21 07:17:59 UTC (1524295079) [ 41.069721] Freeing unused kernel memory: 1024K [ 41.604039] Write protecting the kernel read-only data: 1411k [ 42.584182] Fusion MPT base driver 3.04.20 [ 42.684209] Copyright (c) 1999-2008 LSI Corporation [ 43.620929] SCSI subsystem initialized [ 43.710060] usbcore: registered new interface driver usbfs [ 43.988261] usbcore: registered new interface driver hub [ 44.228535] usbcore: registered new device driver usb [ 44.612246] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 44.780214] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 45.772287] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 45.833072] libata version 3.00 loaded. [ 46.256222] Fusion MPT SPI Host driver 3.04.20 [ 46.924440] mptbase: ioc0: Initiating bringup [ 46.965537] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 47.368459] e1000 0000:60:03.0 eth0: (PCI:33MHz:32-bit) 00:13:21:1a:48:88 [ 47.480138] ehci-pci: EHCI PCI platform driver [ 47.532081] e1000 0000:60:03.0 eth0: Intel(R) PRO/1000 Network Connection [ 47.616203] pata_sil680 0000:60:02.0: version 0.4.9 [ 47.616203] sil680: 133MHz clock. [ 47.668728] scsi host0: pata_sil680 [ 47.724730] scsi host1: pata_sil680 [ 47.780652] ata1: PATA max UDMA/133 cmd 0x26078 ctl 0x2608c bmdma 0x26050 irq 71 [ 47.868048] ata2: PATA max UDMA/133 cmd 0x26070 ctl 0x26088 bmdma 0x26058 irq 71 [ 47.956482] sata_sil 0000:60:04.0: version 2.4 [ 48.001431] scsi host2: sata_sil [ 48.040395] scsi host3: sata_sil [ 48.080301] ata3: SATA max UDMA/100 mmio m512@0xffffffffb0120000 tf 0xffffffffb0120080 irq 73 [ 48.180525] ata1.00: ATA-6: ST340014A, 3.06, max UDMA/100 [ 48.180535] ata1.00: 78165360 sectors, multi 0: LBA [ 48.188349] ata1.00: configured for UDMA/100 [ 48.188893] scsi 0:0:0:0: Direct-Access ATA ST340014A 3.06 PQ: 0 ANSI: 5 [ 48.204037] ioc0: LSI53C1030 B2: Capabilities={Initiator,Target} [ 48.552097] ata4: SATA max UDMA/100 mmio m512@0xffffffffb0120000 tf 0xffffffffb01200c0 irq 73 [ 48.736231] ehci-pci 0000:60:01.2: EHCI Host Controller [ 48.800100] ehci-pci 0000:60:01.2: new USB bus registered, assigned bus number 1 [ 48.888266] ehci-pci 0000:60:01.2: irq 70, io mem 0xffffffffb0122000 [ 48.988198] ehci-pci 0000:60:01.2: USB 2.0 started, EHCI 0.95 [ 49.048092] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 49.048549] ata3.00: ATA-9: INTENSO SSD 128GB, O0213E, max UDMA/133 [ 49.048558] ata3.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 0/32) [ 49.049089] ata3.00: configured for UDMA/100 [ 49.050018] scsi 2:0:0:0: Direct-Access ATA INTENSO SSD 128G 3E PQ: 0 ANSI: 5 [ 49.076404] scsi host4: ioc0: LSI53C1030 B2, FwRev=01032341h, Ports=1, MaxQ=255, IRQ=66 [ 49.368061] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 49.372366] ata4.00: ATA-8: WDC WD10EZEX-75ZF5A0, 80.00A80, max UDMA/133 [ 49.372366] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 0/32) [ 49.376348] ata4.00: configured for UDMA/100 [ 49.376726] scsi 3:0:0:0: Direct-Access ATA WDC WD10EZEX-75Z 0A80 PQ: 0 ANSI: 5 [ 49.832919] sd 0:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.3 GiB) [ 49.833038] sd 0:0:0:0: [sda] Write Protect is off [ 49.833046] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 49.833244] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 49.856289] mptbase: ioc1: Initiating bringup [ 49.912930] sd 2:0:0:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 49.913050] sd 2:0:0:0: [sdb] Write Protect is off [ 49.913058] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 49.913251] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 49.980159] sda: sda1 sda2 sda3 [ 50.032813] sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 50.032813] sd 3:0:0:0: [sdc] 4096-byte physical blocks [ 50.032813] sd 3:0:0:0: [sdc] Write Protect is off [ 50.032813] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 50.032813] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 50.062254] sd 0:0:0:0: [sda] Attached SCSI disk [ 50.065909] sdb: sdb1 sdb2 [ 50.178309] sd 2:0:0:0: [sdb] Attached SCSI disk [ 50.184049] sdc: sdc1 [ 50.278137] sd 3:0:0:0: [sdc] Attached SCSI disk [ 50.828048] ioc1: LSI53C1030 B2: Capabilities={Initiator,Target} [ 51.396313] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 51.476033] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 51.552181] scsi host5: ioc1: LSI53C1030 B2, FwRev=01032341h, Ports=1, MaxQ=255, IRQ=67 [ 51.660024] usb usb1: Product: EHCI Host Controller [ 51.720022] usb usb1: Manufacturer: Linux 4.15.0-3-parisc64-smp ehci_hcd [ 51.800021] usb usb1: SerialNumber: 0000:60:01.2 [ 51.856355] hub 1-0:1.0: USB hub found [ 51.900075] hub 1-0:1.0: 5 ports detected [ 52.620541] ohci-pci: OHCI PCI platform driver [ 52.716162] ohci-pci 0000:60:01.0: OHCI PCI host controller [ 52.784708] ohci-pci 0000:60:01.0: new USB bus registered, assigned bus number 2 [ 52.872774] ohci-pci 0000:60:01.0: irq 68, io mem 0xffffffffb0124000 [ 53.518354] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 53.600061] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 53.688046] usb usb2: Product: OHCI PCI host controller [ 53.748050] usb usb2: Manufacturer: Linux 4.15.0-3-parisc64-smp ohci_hcd [ 53.828038] usb usb2: SerialNumber: 0000:60:01.0 [ 53.884387] hub 2-0:1.0: USB hub found [ 53.932078] hub 2-0:1.0: 3 ports detected [ 54.020147] ohci-pci 0000:60:01.1: OHCI PCI host controller [ 54.088096] ohci-pci 0000:60:01.1: new USB bus registered, assigned bus number 3 [ 54.176023] ohci-pci 0000:60:01.1: irq 69, io mem 0xffffffffb0123000 [ 54.824261] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 54.904033] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 54.992034] usb usb3: Product: OHCI PCI host controller [ 55.056042] usb usb3: Manufacturer: Linux 4.15.0-3-parisc64-smp ohci_hcd [ 55.136033] usb usb3: SerialNumber: 0000:60:01.1 [ 55.193415] hub 3-0:1.0: USB hub found [ 55.236662] hub 3-0:1.0: 2 ports detected [ 56.922211] raid6: int64x1 gen() 1041 MB/s [ 57.038228] raid6: int64x1 xor() 497 MB/s [ 57.154204] raid6: int64x2 gen() 1290 MB/s [ 57.270173] raid6: int64x2 xor() 628 MB/s [ 57.386187] raid6: int64x4 gen() 1349 MB/s [ 57.502198] raid6: int64x4 xor() 677 MB/s [ 57.618173] raid6: int64x8 gen() 770 MB/s [ 57.734167] raid6: int64x8 xor() 665 MB/s [ 57.784015] raid6: using algorithm int64x4 gen() 1349 MB/s [ 57.852036] raid6: .... xor() 677 MB/s, rmw enabled [ 57.908029] raid6: using intx1 recovery algorithm [ 58.972161] xor: measuring software checksum speed [ 59.070173] 8regs : 4496.000 MB/sec [ 59.158169] 8regs_prefetch: 3433.000 MB/sec [ 59.250167] 32regs : 3931.000 MB/sec [ 59.338168] 32regs_prefetch: 3428.000 MB/sec [ 59.392026] xor: using function: 8regs (4496.000 MB/sec) [ 60.156291] Btrfs loaded, crc32c=crc32c-generic [ 62.387327] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null) [ 67.494034] ipmi message handler version 39.2 [ 67.977088] ipmi device interface [ 68.204313] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 68.270631] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 68.332233] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 68.784087] IPMI System Interface driver. [ 68.844682] ipmi_si: Adding device-tree-specified kcs state machine [ 68.921533] ipmi_si: Trying device-tree-specified kcs state machine at mem address 0xfffffff0f05b0000, slave address 0x0, irq 0 [ 69.344952] BTRFS: device fsid 2692d42f-4b49-4294-9a0e-36b43d4ff224 devid 3 transid 109 /dev/sdc [ 69.582134] ipmi 16: Found new BMC (man_id: 0x00000b, prod_id: 0x8201, dev_id: 0x32) [ 69.676207] ipmi 16: IPMI kcs interface initialized [ 73.256276] EXT4-fs (sdb2): re-mounted. Opts: (null) [ 75.176513] Adding 2097148k swap on /dev/sdb1. Priority:3 extents:1 across:2097148k SSFS [ 79.860000] Adding 15728636k swap on /srv/swapfile. Priority:-2 extents:851 across:122421248k SSFS [ 83.524322] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null) [ 92.436551] Adding 20971516k swap on /srv/d-i/swapfile2. Priority:-3 extents:559 across:90406908k FS [ 97.492045] audit: type=1400 audit(1524295136.168:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=951 comm="apparmor_parser" [ 97.672091] audit: type=1400 audit(1524295136.168:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=951 comm="apparmor_parser" [ 97.860236] audit: type=1400 audit(1524295136.168:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=951 comm="apparmor_parser" [ 98.052186] audit: type=1400 audit(1524295136.536:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=952 comm="apparmor_parser" [ 98.865159] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 98.904456] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 99.080129] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 103.036709] RPC: Registered named UNIX socket transport module. [ 103.108066] RPC: Registered udp transport module. [ 103.164040] RPC: Registered tcp transport module. [ 103.220045] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 103.688705] FS-Cache: Loaded [ 104.652461] FS-Cache: Netfs 'nfs' registered for caching [ 105.656354] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 147.724055] systemd-logind[1646]: New seat seat0.