Firmware Version 37.40 Duplex Console IO Dependent Code (IODC) revision 1 ------------------------------------------------------------------------------ (c) Copyright 1996-1999, Hewlett-Packard Company, All rights reserved ------------------------------------------------------------------------------ Processor Speed Coprocessor State Cache Size --------------- ----------------- ---------- 132 MHz Functional 64 KB Model: D220/1 Available memory (bytes) : 134217728 Primary boot path: 8/4.5 (dec) Alternate boot path: 8/16/5.0 (dec) Console path: 8/16/4.0 (dec) Keyboard path: 8/16/7.0 (dec) WARNING: Memory has been initialized, but not tested as a result of FASTBOOT being enabled. To test memory, use the FASTBOOT command in the CONFIGURATION menu and reboot the system. Processor is booting from first available device. To discontinue, press any key within 10 seconds. Boot terminated. ------- Main Menu ------------------------------------------------------------- Command Description ------- ----------- BOot [PRI|ALT|] Boot from specified path PAth [PRI|ALT|CON|KEY] [] Display or modify a path SEArch [DIsplay|IPL] [] Search for boot devices COnfiguration [] Access Configuration menu/commands INformation [] Access Information menu/commands SERvice [] Access Service menu/commands DIsplay Redisplay the current menu HElp [|] Display help for menu or command RESET Restart the system ------- Main Menu: Enter command > sea Searching for potential boot device(s)... This may take several minutes. To discontinue search, press any key (termination may not be immediate). Path Number Device Path (dec) Device Type ----------- ----------------- ----------- P0 8/12.5 Random access media P1 8/16/5.2 Random access media P2 8/16/5.0 Sequential access media P3 8/16/6.0 LAN Module Main Menu: Enter command > p2 1 ERROR: Unknown command Main Menu: Enter command > bo p1 Interact with IPL (Y, N, or Cancel)?> y Booting... Boot IO Dependent Code (IODC) revision 144 HARD Booted. palo ipl 1.2 root@b180l.da-kot Tue Apr 8 12:43:07 CEST 2003 Boot image contains: 0/vmlinux32 3308755 bytes @ 0x17d7800 0/ramdisk 1522047 bytes @ 0xf800 Information: No console specified on kernel command line. This is normal. PALO will choose the console currently used by firmware (serial).Current command line: 0/vmlinux-32 initrd=initrd TERM=linux root=/dev/ram0 init=/linuxrc console=ttyS0 0: 0/vmlinux-32 1: initrd=initrd 2: TERM=linux 3: root=/dev/ram0 4: init=/linuxrc 5: console=ttyS0 Edit which field? (or 'b' to boot with this command line)? 0 b Command line for kernel: ' TERM=linux root=/dev/ram0 init=/linuxrc console=ttyS0 palo_kernel=0/vmlinux-32' Selected kernel: /vmlinux-32 from partition 0 Selected ramdisk: initrd from partition 0 ELF32 executable Entry 00100000 first 00100000 n 5 Segment 0 load 00100000 size 1873764 mediaptr 0x1000 Segment 1 load 002ca000 size 623560 mediaptr 0x1cb000 Segment 2 load 00364000 size 8192 mediaptr 0x264000 Segment 3 load 00368000 size 32768 mediaptr 0x266000 Segment 4 load 00390324 size 100976 mediaptr 0x26e324 Loading ramdisk 1522047 bytes @ 07e7b000... Branching to kernel entry point 0x00100000. If this is the last message you see, you may need to switch your console. This is a common symptom -- search the FAQ and mailing list at parisc-linux.org Linux version 2.4.20-pa32 (root@b180l.da-kot) (gcc version 3.2.2) #1 Fri May 9 20:31:04 Local time zone must be set--see zic manua FP[0] enabled: Rev 1 Model 15 The 32-bit Kernel has started... Determining PDC firmware type: System Map. model 00005120 00000481 00000000 00000000 773ed53a 100000f0 00000004 000000ba 000000ba vers 00000008 CPUID vers 15 rev 8 (0x000001e8) model 9000/803/D220 Total Memory: 128 Mb initrd: 17e7b000-17fee97f initrd: reserving 07e7b000-07fee97f (mem_max 08000000) pagetable_init On node 0 totalpages: 32768 zone(0): 32768 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: TERM=linux root=/dev/ram0 init=/linuxrc console=ttyS0 palo_kernel=0/vmlinux-32 Console: colour dummy device 160x64 Calibrating delay loop... 87.85 BogoMIPS Memory: 125228k available Dentry cache hash table entries: 16384 (order: 5, 131072 bytes) Inode cache hash table entries: 8192 (order: 4, 65536 bytes) Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 32768 (order: 5, 131072 bytes) Searching for devices... Two devices have hardware path 8. Please file a bug with HP. In the meantime, you could try rearranging your cards. Found devices: 1. Phantom PseudoBC GSC+ Port (7) at 0xffc00000 [8], versions 0x504, 0x0, 0x0 2. Bluefish Add-on FW-SCSI (4) at 0xfff8c000 [8/12], versions 0x13, 0x1, 0x89 3. UL 350 Lasi Core BA (11) at 0xffd00000 [8/16], versions 0x2e, 0x0, 0x81, additional addresses: 0xffd0c000 0xffc00000 4. UL 350 Core Centronics (10) at 0xffd02000 [8/16/0], versions 0x2e, 0x0, 0x74, additional addresses: 0xffd01000 0xffd03000 5. UL 350 Lasi Core RS-232 (10) at 0xffd05000 [8/16/4], versions 0x2e, 0x0, 0x8c 6. UL 350 Core SCSI (10) at 0xffd06000 [8/16/5], versions 0x2e, 0x0, 0x82 7. UL 350 Core LAN (802.3) (10) at 0xffd07000 [8/16/6], versions 0x2e, 0x0, 0x8a 8. UL 350 Core PS/2 Port (10) at 0xffd08000 [8/16/7], versions 0x2e, 0x0, 0x84 9. UL 350 Core PS/2 Port (10) at 0xffd08100 [8/16/8], versions 0x2e, 0x0, 0x84 10. UL 350 Core Wax BA (11) at 0xffe00000 [8/20], versions 0x30, 0x0, 0x8e 11. UL 350 Wax Core RS-232 (10) at 0xffe02000 [8/20/2], versions 0x30, 0x0, 0x8c 12. UL 350 Wax EISA BA (11) at 0xfc000000 [8/20/5], versions 0x30, 0x0, 0x90, additional addresses: 0xffc88000 13. UL L2 132 (803/D220,D320) (0) at 0xfffbe000 [62], versions 0x512, 0x0, 0x4 14. Memory (1) at 0xfffbf000 [63], versions 0x7f, 0x0, 0x9 CPU(s): 1 x PA7300LC (PCX-L2) at 132.000000 MHz Lasi version 0 at 0xffd00000 found. LED display at ffd0c000 registered Wax at 0xffe00000 found. Wax EISA Adapter found at 0xfc000000 EISA EEPROM at 0xffc88000 Enumerating EISA bus EISA slot 1 a configured board was not detected ( expected ___FFFF) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Soft power switch enabled, polling @ 0xf0140000. Starting kswapd Journalled Block Device driver loaded devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at iomem 0xffd05800 (irq = 90) is a 16550A ttyS01 at iomem 0xffe02800 (irq = 121) is a 16550A PS/2 keyboard port at 0xffd08000 (irq 69) found, no device attached. PS/2 psaux port at 0xffd08100 (irq 69) found, no device attached. Generic RTC Driver v1.07 RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize Found i82596 at 0xffd07000, IRQ 87 eth0: 82596 at 0xffd07000, 08 00 09 A3 14 90 IRQ 87. 82596.c $Revision: 1.30 $ Equalizer1996: $Revision: 1.2.1 $ $Date: 1996/09/22 13:52:00 $ Simon Janes (simon@ncm.com) SCSI subsystem driver Revision: 1.00 STI GSC/PCI graphics driver version 0.9 mice: PS/2 mouse device common for all mice NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 8192 bind 16384) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 184k freed ---- Beginning storage detection ---- Scanning for 3w-xxxx...---- Scanning for 53c7,8xx...---- Scanning for 53c700...---- Detected 53c700 hardware ---- Scanning for AM53C974...---- Scanning for a100u2w...---- Scanning for atp870u...---- Scanning for cpqfc...---- Scanning for dmx3191d...---- Scanning for g_NCR5380...---- Scanning for ide-scsi...---- Scanning for initio...---- Scanning for lasi700...---- Detected lasi700 hardware ---- Scanning for osst...---- Detected osst hardware ---- Scanning for pci2000...---- Scanning for qla1280...---- Scanning for qlogicfc...---- Scanning for st...---- Detected st hardware ---- Scanning for tmscsim...---- Scanning for zalon7xx_mod...---- Detected zalon7xx_mod hardware ---- Scanning for aic7xxx...---- Beginning ide detection ---- Scanning for ide-mod...---- Detected ide-mod hardware ---- Scanning for ide-probe-mod...---- Detected ide-probe-mod hardware ---- Scanning for ide-cd...---- Detected ide-cd hardware ---- Beginning usb detection ---- Scanning for usbcore...---- Detected usbcore hardware ---- Scanning for usb-ohci...---- Scanning for hid...---- Detected hid hardware ---- Scanning for usb-storage...---- Detected usb-storage hardware ---- Mounting the CD ---- CD medium found on /newroot/dev/cdroms/cdrom0 ---- Mounting compressed loopback filesystem ---- Copying and symlinking files from CD to populate / ---- Switching to tmpfs root filesystem INIT: version 2.84 booting Gentoo Linux; http://www.gentoo.org/ Copyright 2001-2002 Gentoo Technologies, Inc.; Distributed under the GPL * Mounting /proc...  [ ok ] * Starting devfsd...  [ ok ] * Mounting tmpfs at /mnt/.init.d...  [ ok ] * Caching service dependencies...  [ ok ] * Activating swap...  [ ok ] * Remounting root filesystem read-only (if necessary)...  [ ok ] * Checking root filesystem...  [ ok ] * Remounting root filesystem read/write...  [ ok ] * Checking all filesystems... fsck 1.32 (09-Nov-2002)  [ ok ] * Mounting local filesystems...  [ ok ] * Mounting USB device filesystem...  [ ok ] * Activating (possibly) more swap...  [ ok ] * Setting system clock to hardware clock [UTC]...  [ ok ] * Setting hostname to cdimage...  [ ok ] * Configuring kernel parameters...  [ ok ] * Updating environment...  [ ok ] * Cleaning /var/lock, /var/run...  [ ok ] * Cleaning /tmp directory...  [ ok ] * Bringing lo up...  [ ok ] * Initializing random number generator...  [ ok ] INIT: Entering runlevel: 3 * Starting metalog...  [ ok ] * Mounting network filesystems...  [ ok ] * Freeing initrd...  [ ok ] * Auto-scrambling root password for security...  [ ok ] This is a testing version of the LiveCD for Gentoo/HPPA. If you find bugs, please report them on bugzilla : http://bugs.gentoo.org If you have any problems or questions during instalation, you can join #gentoo-hppa on the irc.freenode.net network. Many applications, including irssi (for irc chat) are available on this LiveCD. Guy Martin - HPPA port lead.