Linux version 2.4.25-pa1 (bame@palinux) (gcc version 3.0.4) #1 Wed Mar 10 08:58:00 MST 2004 FP[0] enabled: Rev 0 Model 14 The 32-bit Kernel has started... Determining PDC firmware type: System Map. model 00005a20 00000481 00000000 00000002 77a0bf2d 100000f0 00000008 000000b2 000000b2 vers 00000301 CPUID vers 14 rev 11 (0x000001cb) capabilities 0x3 model 9000/861/D270 Total Memory: 256 Mb pagetable_init On node 0 totalpages: 65536 zone(0): 65536 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/sdd2 HOME=/ console=ttyS0 TERM=vt102 palo_kernel=2/vmlinux-2.4.25-pa1-32 Console: colour dummy device 160x64 Calibrating delay loop... 319.48 BogoMIPS Memory: 255796k available Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) Inode cache hash table entries: 16384 (order: 5, 131072 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) Searching for devices... Found devices: 1. U2-IOA BC Runway Port (12) at 0xfff88000 [8], versions 0x580, 0xf, 0xb 2. Bluefish Add-on FW-SCSI (4) at 0xf100c000 [8/12], versions 0x13, 0x1, 0x89 3. UL 350 Lasi Core BA (11) at 0xffd00000 [8/16], versions 0x2e, 0x0, 0x81, additional addresses: 0xffd0c000 0xffc00000 4. UL 350 Core Centronics (10) at 0xffd02000 [8/16/0], versions 0x2e, 0x0, 0x74, additional addresses: 0xffd01000 0xffd03000 5. UL 350 Lasi Core RS-232 (10) at 0xffd05000 [8/16/4], versions 0x2e, 0x0, 0x8c 6. UL 350 Core SCSI (10) at 0xffd06000 [8/16/5], versions 0x2e, 0x0, 0x82 7. UL 350 Core LAN (802.3) (10) at 0xffd07000 [8/16/6], versions 0x2e, 0x0, 0x8a 8. UL 350 Core PS/2 Port (10) at 0xffd08000 [8/16/7], versions 0x2e, 0x0, 0x84 9. UL 350 Core PS/2 Port (10) at 0xffd08100 [8/16/8], versions 0x2e, 0x0, 0x84 10. UL 350 Core Wax BA (11) at 0xffe00000 [8/20], versions 0x30, 0x0, 0x8e 11. UL 350 Wax Core RS-232 (10) at 0xffe02000 [8/20/2], versions 0x30, 0x0, 0x8c 12. UL 350 Wax EISA BA (11) at 0xfc000000 [8/20/5], versions 0x30, 0x0, 0x90, additional addresses: 0xffc88000 13. U2-IOA BC GSC+ Port (7) at 0xf103f000 [8/63], versions 0x501, 0x1, 0xc 14. U2-IOA BC Runway Port (12) at 0xfff8a000 [10], versions 0x580, 0xf, 0xb 15. U2-IOA BC GSC+ Port (7) at 0xf183f000 [10/63], versions 0x501, 0x1, 0xc 16. UL 1w U160 512K/512K (861/D270,D370) (0) at 0xfffa0000 [32], versions 0x5a2, 0x0, 0x4 17. Memory (1) at 0xfffb1000 [49], versions 0x76, 0x0, 0x9 CPU(s): 1 x PA8000 (PCX-U) at 160.000000 MHz Found U2 at 0xfff88000 Found U2 at 0xfff8a000 Lasi version 0 at 0xffd00000 found. LED display at ffd0c000 registered Wax at 0xffe00000 found. Wax EISA Adapter found at 0xfc000000 EISA EEPROM at 0xffc88000 Enumerating EISA bus EISA slot 1: INP0500 EISA IRQ 10 EISA slot 2 a configured board was not detected ( expected ___FFFF) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Soft power switch enabled, polling @ 0xf0140000. Starting kswapd Journalled Block Device driver loaded Installing knfsd (copyright (C) 1996 okir@monad.swb.de). parport_init_chip: initialize bidirectional-mode. parport0: PC-style at 0xffd02800, irq 88 [PCSPP,TRISTATE] STI GSC/PCI graphics driver version 0.9 pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at iomem 0xffd05800 (irq = 90) is a 16550A ttyS01 at iomem 0xffe02800 (irq = 121) is a 16550A PS/2 keyboard port at 0xffd08000 (irq 69) found, no device attached. PS/2 psaux port at 0xffd08100 (irq 69) found, no device attached. lp0: using parport0 (interrupt-driven). Generic RTC Driver v1.07 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) Found i82596 at 0xffd07000, IRQ 87 eth0: 82596 at 0xffd07000, 08 00 09 D2 B2 B6 IRQ 87. 82596.c $Revision: 1.32 $ Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx SCSI subsystem driver Revision: 1.00 zalon_scsi_callback: Zalon vers field is 0x1, IRQ 34 ncr53c8xx: 53c720 detected ncr53c720-0: ID 7, Fast-10, Parity Checking, Differential scsi0 : ncr53c8xx-3.4.3b-20010512 Vendor: SEAGATE Model: ST34573WC Rev: HP05 Type: Direct-Access ANSI SCSI revision: 02 Vendor: SEAGATE Model: ST34573WC Rev: HP05 Type: Direct-Access ANSI SCSI revision: 02 Vendor: SEAGATE Model: ST34573WC Rev: HP05 Type: Direct-Access ANSI SCSI revision: 02 Vendor: SEAGATE Model: ST34573WC Rev: HP05 Type: Direct-Access ANSI SCSI revision: 02 53c700: Version 2.8 By James.Bottomley@HansenPartnership.com scsi1: 53c710 rev 2 scsi1 : LASI SCSI 53c700 scsi1 (0:0) New error handler wants to abort command 0x12 00 00 00 ff 00 scsi1 (0:0) New error handler wants device reset 0x12 00 00 00 ff 00 scsi1 (0:0) New error handler wants BUS reset, cmd 1fff4600 0x12 00 00 00 ff 00 scsi1 (0:0) New error handler wants to abort command 0x00 00 00 00 00 00 scsi: device set offline - not ready or command retry failed after bus reset: host 1 channel 0 id 0 lun 0 scsi: unknown type 16 Vendor: Model: Rev: Type: Unknown ANSI SCSI revision: 05 scsi1 (1:0) New error handler wants to abort command 0x12 00 00 00 ff 00 scsi1 (1:0) New error handler wants device reset 0x12 00 00 00 ff 00 scsi1 (1:0) New error handler wants BUS reset, cmd 1fff4600 0x12 00 00 00 ff 00 scsi1 (1:0) New error handler wants to abort command 0x00 00 00 00 00 00 scsi: device set offline - not ready or command retry failed after bus reset: host 1 channel 0 id 1 lun 0 scsi: unknown type 16 Vendor: Model: Rev: Type: Unknown ANSI SCSI revision: 05 scsi1 (2:0) New error handler wants to abort command 0x12 00 00 00 ff 00 scsi1 (2:0) New error handler wants device reset 0x12 00 00 00 ff 00 scsi1 (2:0) New error handler wants BUS reset, cmd 1fff4600 0x12 00 00 00 ff 00 scsi1 (2:0) New error handler wants to abort command 0x00 00 00 00 00 00 scsi: device set offline - not ready or command retry failed after bus reset: host 1 channel 0 id 2 lun 0 scsi: unknown type 16 Vendor: Model: Rev: Type: Unknown ANSI SCSI revision: 05 scsi1 (3:0) New error handler wants to abort command 0x12 00 00 00 ff 00 scsi1 (3:0) New error handler wants device reset 0x12 00 00 00 ff 00 scsi1 (3:0) New error handler wants BUS reset, cmd 1fff4600 0x12 00 00 00 ff 00 scsi1: Bus Reset detected, executing command 1fff4600, slot 1ffd08bc, dsp 00170008[0008] failing command because of reset, slot 1ffd0520, cmnd 1fff4600 failing command because of reset, slot 1ffd0654, cmnd 1fff4600 failing command because of reset, slot 1ffd0788, cmnd 1fff4600 failing command because of reset, slot 1ffd08bc, cmnd 1fff4600 scsi1 (3:0) New error handler wants to abort command 0x00 00 00 00 00 00 scsi1: Bus Reset detected, executing command 1fff4600, slot 1ffd08bc, dsp 00170008[0008] failing command because of reset, slot 1ffd08bc, cmnd 1fff4600 scsi: device set offline - not ready or command retry failed after bus reset: host 1 channel 0 id 3 lun 0 scsi1 (4:0) New error handler wants to abort command 0x12 00 00 00 ff 00 scsi1 (4:0) New error handler wants device reset 0x12 00 00 00 ff 00 scsi1 (4:0) New error handler wants BUS reset, cmd 1fff4800 0x12 00 00 00 ff 00 scsi1 (4:0) New error handler wants to abort command 0x00 00 00 00 00 00 scsi: device set offline - not ready or command retry failed after bus reset: host 1 channel 0 id 4 lun 0 scsi: unknown type 16 Vendor: Model: Rev: Type: Unknown ANSI SCSI revision: 05 scsi1 (5:0) New error handler wants to abort command 0x12 00 00 00 ff 00 scsi1 (5:0) New error handler wants device reset 0x12 00 00 00 ff 00 scsi1 (5:0) New error handler wants BUS reset, cmd 1fff4800 0x12 00 00 00 ff 00 scsi1 (5:0) New error handler wants to abort command 0x00 00 00 00 00 00 scsi: device set offline - not ready or command retry failed after bus reset: host 1 channel 0 id 5 lun 0 scsi: unknown type 16 Vendor: Model: Rev: Type: Unknown ANSI SCSI revision: 05 scsi1 (6:0) New error handler wants to abort command 0x12 00 00 00 ff 00 scsi1 (6:0) New error handler wants device reset 0x12 00 00 00 ff 00 scsi1 (6:0) New error handler wants BUS reset, cmd 1fff4800 0x12 00 00 00 ff 00 scsi1 (6:0) New error handler wants to abort command 0x00 00 00 00 00 00 scsi: device set offline - not ready or command retry failed after bus reset: host 1 channel 0 id 6 lun 0 scsi: unknown type 16 Vendor: Model: Rev: Type: Unknown ANSI SCSI revision: 05 resize_dma_pool: unknown device type 16 resize_dma_pool: unknown device type 16 resize_dma_pool: unknown device type 16 resize_dma_pool: unknown device type 16 resize_dma_pool: unknown device type 16 resize_dma_pool: unknown device type 16 resize_dma_pool: unknown device type 16 resize_dma_pool: unknown device type 16 resize_dma_pool: unknown device type 16 resize_dma_pool: unknown device type 16 resize_dma_pool: unknown device type 16 resize_dma_pool: unknown device type 16 Attached scsi disk sda at scsi0, channel 0, id 2, lun 0 Attached scsi disk sdb at scsi0, channel 0, id 3, lun 0 Attached scsi disk sdc at scsi0, channel 0, id 4, lun 0 Attached scsi disk sdd at scsi0, channel 0, id 5, lun 0 ncr53c720-0-<2,*>: FAST-10 WIDE SCSI 20.0 MB/s (100 ns, offset 8) SCSI device sda: 8388314 512-byte hdwr sectors (4295 MB) Partition check: sda: sda1 ncr53c720-0-<3,*>: FAST-10 WIDE SCSI 20.0 MB/s (100 ns, offset 8) SCSI device sdb: 8388314 512-byte hdwr sectors (4295 MB) sdb: sdb1 sdb2 ncr53c720-0-<4,*>: FAST-10 WIDE SCSI 20.0 MB/s (100 ns, offset 8) SCSI device sdc: 8388314 512-byte hdwr sectors (4295 MB) sdc: sdc1 ncr53c720-0-<5,*>: FAST-10 WIDE SCSI 20.0 MB/s (100 ns, offset 8) SCSI device sdd: 8388314 512-byte hdwr sectors (4295 MB) sdd: sdd1 sdd2 sdd3 resize_dma_pool: unknown device type 16 resize_dma_pool: unknown device type 16 resize_dma_pool: unknown device type 16 resize_dma_pool: unknown device type 16 resize_dma_pool: unknown device type 16 resize_dma_pool: unknown device type 16 resize_dma_pool: unknown device type 16 resize_dma_pool: unknown device type 16 resize_dma_pool: unknown device type 16 resize_dma_pool: unknown device type 16 resize_dma_pool: unknown device type 16 resize_dma_pool: unknown device type 16 Attached scsi generic sg4 at scsi1, channel 0, id 0, lun 0, type 16 Attached scsi generic sg5 at scsi1, channel 0, id 1, lun 0, type 16 Attached scsi generic sg6 at scsi1, channel 0, id 2, lun 0, type 16 Attached scsi generic sg7 at scsi1, channel 0, id 4, lun 0, type 16 Attached scsi generic sg8 at scsi1, channel 0, id 5, lun 0, type 16 Attached scsi generic sg9 at scsi1, channel 0, id 6, lun 0, type 16 resize_dma_pool: unknown device type 16 resize_dma_pool: unknown device type 16 resize_dma_pool: unknown device type 16 resize_dma_pool: unknown device type 16 resize_dma_pool: unknown device type 16 resize_dma_pool: unknown device type 16 STI GSC/PCI graphics driver version 0.9 BUG: Skipping previously registered driver: sti (native) mice: PS/2 mouse device common for all mice HP SDC: No SDC found. HP SDC MLC: Registering the System Domain Controller's HIL MLC. HP SDC MLC: Request for raw HIL ISR hook denied md: linear personality registered as nr 1 md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: raid5 personality registered as nr 4 raid5: measuring checksumming speed 8regs : 350.800 MB/sec 8regs_prefetch: 350.800 MB/sec 32regs : 272.800 MB/sec 32regs_prefetch: 272.800 MB/sec raid5: using function: 8regs_prefetch (350.800 MB/sec) md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. Initializing Cryptographic API NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 32768) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 261k freed Adding Swap: 267984k swap-space (priority -1) eth0: link ok. B/sec) md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. Initializing Cryptographic API NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 32768) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 261k freed Adding Swap: 267984k swap-space (priority -1) eth0: link ok. rguevara@hplinux:~$ uname -a Linux hplinux.unitec.edu 2.4.25-pa1 #1 Wed Mar 10 08:58:00 MST 2004 parisc unknown rguevara@hplinux:~$ cat /proc/cpuinfo processor : 0 cpu family : PA-RISC 2.0 cpu : PA8000 (PCX-U) cpu MHz : 160.000000 model : 9000/861/D270 model name : UL 1w U160 512K/512K (861/D270,D370) hversion : 0x00005a20 sversion : 0x00000481 I-cache : 512 KB D-cache : 512 KB (WB) ITLB entries : 96 DTLB entries : 96 - shared with ITLB BTLB : not supported bogomips : 319.48 software id : 2007023405