Phil Scarr [ 0.000000] Linux version 5.3.0-rc7-32bit+ (deller@ls3530) (gcc version 9.1.1 20190503 (Red Hat Cross 9.1.1-1) (GCC)) #1418 SMP Thu Sep 5 14:33:30 CEST 2019 [ 0.000000] CPU0: thread -1, cpu 0, socket 0 [ 0.000000] FP[0] enabled: Rev 1 Model 11 [ 0.000000] The 32-bit Kernel has started... [ 0.000000] Kernel default page size is 4 KB. Huge pages disabled. [ 0.000000] printk: bootconsole [ttyB0] enabled [ 0.000000] Initialized PDC Console for debugging. [ 0.000000] Determining PDC firmware type: System Map. [ 0.000000] model 000058a0 00000491 00000000 00000002 77cc1b7e 100000f0 00000004 0000008a 0000008a [ 0.000000] vers 0000000d [ 0.000000] CPUID vers 11 rev 13 (0x0000016d) [ 0.000000] model 9000/831/D350 [ 0.000000] Memory Ranges: [ 0.000000] 0) Start 0x0000000000000000 End 0x0000000017ffffff Size 384 MB [ 0.000000] Total Memory: 384 MB [ 0.000000] initrd: 26936000-27fee706 [ 0.000000] initrd: reserving 16936000-17fee706 (mem_max 18000000) [ 0.000000] PDT: type PDT_PDC, size 50, entries 0, status 0, dbe_loc 0xffffffff, good_mem 27 MB [ 0.000000] PDT: Firmware reports all memory OK. [ 0.000000] On node 0 totalpages: 98304 [ 0.000000] Normal zone: 864 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 98304 pages, LIFO batch:31 [ 0.000000] percpu: Embedded 21 pages/cpu s56608 r8192 d21216 u86016 [ 0.000000] pcpu-alloc: s56608 r8192 d21216 u86016 alloc=21*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] SMP: bootstrap CPU ID is 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 97440 [ 0.000000] Kernel command line: single panic=-1 root=UUID=53163427-9988-49c0-9a32-612051e03dfc HOME=/ cryptomgr.notests console=ttyB0 TERM=vt102 palo_kernel=2/vmlinux.tulip.6.nommio [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 356396K/393216K available (5932K kernel code, 744K rwdata, 1425K rodata, 492K init, 352K bss, 36820K reserved, 0K cma-reserved) [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 96 [ 0.000062] sched_clock: 32 bits at 101MHz, resolution 9ns, wraps every 21262214139ns [ 0.098695] Console: colour dummy device 160x64 [ 0.151447] Calibrating delay loop... 100.24 BogoMIPS (lpj=501248) [ 0.301487] pid_max: default: 32768 minimum: 301 [ 0.364213] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.441620] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.547215] *** VALIDATE proc *** [ 0.584787] *** VALIDATE cgroup1 *** [ 0.621571] *** VALIDATE cgroup2 *** [ 0.683201] rcu: Hierarchical SRCU implementation. [ 0.743835] smp: Bringing up secondary CPUs ... [ 0.791541] smp: Brought up 1 node, 1 CPU [ 0.845463] devtmpfs: initialized [ 0.894968] random: get_random_u32 called from bucket_table_alloc+0x14c/0x17c with crng_init=0 [ 0.995556] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 1.111638] futex hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 1.203480] NET: Registered protocol family 16 [ 1.256681] EISA bus registered [ 1.293371] Searching for devices... [ 5.411519] random: fast init done [ 5.541489] Found devices: [ 5.571563] 1. U2-IOA BC Runway Port at 0xfff88000 [8] { 12, 0x7, 0x580, 0x0000b } [ 5.661539] 2. UL 550 Lasi Core BA at 0xffd00000 [8/16] { 11, 0x0, 0x02f, 0x00081 }, additional addresses: 0xffd0c000 0xffc00000 [ 5.801559] 3. UL 550 Core SCSI at 0xffd06000 [8/16/5] { 10, 0x0, 0x02f, 0x00082 } [ 5.891547] 4. UL 350 Core LAN (802.3) at 0xffd07000 [8/16/6] { 10, 0x0, 0x02f, 0x0008a } [ 5.991545] 5. UL 550 Core Centronics at 0xffd02000 [8/16/0] { 10, 0x0, 0x02f, 0x00074 }, additional addresses: 0xffd01000 0xffd03000 [ 6.131546] 6. UL 550 Core PS/2 Port at 0xffd08000 [8/16/7] { 10, 0x0, 0x02f, 0x00084 } [ 6.231546] 7. UL 550 Core PS/2 Port at 0xffd08100 [8/16/8] { 10, 0x0, 0x02f, 0x00084 } [ 6.321542] 8. UL 550 Core Wax BA at 0xffe00000 [8/20] { 11, 0x0, 0x031, 0x0008e } [ 6.411544] 9. UL 550 Wax EISA BA at 0xfc000000 [8/20/5] { 11, 0x0, 0x031, 0x00090 }, additional addresses: 0xffc88000 [ 6.541575] 10. UL 550 Wax Core RS-232 at 0xffe02000 [8/20/2] { 10, 0x0, 0x031, 0x0008c } [ 6.641554] 11. Gecko BOA BC GSC+ Port at 0xf1000000 [8/0] { 7, 0x0, 0x500, 0x0000c } [ 6.731543] 12. UltraLight CAP/MUX at 0xf1100000 [8/0/0] { 5, 0x0, 0x010, 0x0000d } [ 6.831546] 13. Gecko BOA BC HP-PB Port at 0xf113c000 [8/0/60] { 7, 0x0, 0x103, 0x0000c } [ 6.921542] 14. Bluefish Add-on FW-SCSI at 0xf1004000 [8/4] { 4, 0x1, 0x013, 0x00089 } [ 7.021539] 15. HP HSC-PCI Cards at 0xf1008000 [8/8] { 4, 0x0, 0x004, 0x0009d } [ 7.111540] 16. U2-IOA BC GSC+ Port at 0xf103f000 [8/63] { 7, 0x1, 0x501, 0x0000c } [ 7.201537] 17. U2-IOA BC Runway Port at 0xfff8a000 [10] { 12, 0x7, 0x580, 0x0000b } [ 7.291540] 18. U2-IOA BC GSC+ Port at 0xf183f000 [10/63] { 7, 0x1, 0x501, 0x0000c } [ 7.381540] 19. UL Proc 2-way T'100 (831/D250,D350) at 0xfffa0000 [32] { 0, 0x0, 0x58a, 0x00004 } [ 7.491544] 20. UL Proc 2-way T'100 (831/D250,D350) at 0xfffa2000 [34] { 0, 0x0, 0x58a, 0x00004 } [ 7.601546] 21. Memory at 0xfffb1000 [49] { 1, 0x0, 0x052, 0x00009 } [ 7.974077] CPU1: thread -1, cpu 0, socket 1 [ 8.075617] Releasing cpu 1 now, hpa=fffa2000 [ 8.392294] CPU(s): 2 out of 2 PA7200 (PCX-T') at 101.000000 MHz online [ 8.473936] alternatives: applied 50 out of 225 patches [ 8.564450] Whole cache flush 144122 cycles, flushing 8658944 bytes 2412871 cycles [ 8.564520] Cache flush threshold set to 0 KiB [ 8.611546] TLB flush threshold set to 240 KiB [ 8.662833] Found U2 at 0xfff88000 [ 8.719564] Found U2 at 0xfff8a000 [ 8.768541] Lasi version 0 at 0xffd00000 found. [ 8.821542] LED display at ffd0c000 registered [ 8.873834] wax at 0xffe00000 found. [ 8.912551] Wax EISA Adapter found at 0xfc000000 [ 8.988272] Enumerating EISA bus [ 9.021591] EISA slot 8: HWP1510 EISA memory [mem 0xfe800000-0xfe810000] [ 9.101699] eisa_ba 8:20:5: Probing EISA bus 0 [ 9.152041] eisa 00:00: EISA: Mainboard HWPC051 detected [ 9.223279] eisa 00:08: EISA: slot 8: HWP1510 detected [ 9.282082] eisa_ba 8:20:5: EISA: Detected 1 card [ 9.342528] Found GeckoBoa at 0xf1000000, bus space [mem 0xf1100000-0xf11fffff], claimed. [ 9.431992] Found GeckoBoa at 0xf103f000, bus space [mem 0x00000000-0xffffffff], not claimed. [ 9.531969] Found GeckoBoa at 0xf183f000, bus space [mem 0x00000000-0xffffffff], claimed. [ 9.632499] Dino version 3.x (card mode) found at 0xf1008000 [ 9.762268] dino 8:8: PCI host bridge to bus 0000:00 [ 9.811636] pci_bus 0000:00: root bus resource [io 0x10000-0x1ffff] (bus address [0x0000-0xffff]) [ 9.921586] pci_bus 0000:00: root bus resource [bus 00-ff] [ 9.991776] pci 0000:00:01.0: [1011:0009] type 00 class 0x020000 [ 10.061676] pci 0000:00:01.0: reg 0x10: [io 0x10000-0x1007f] [ 10.131607] pci 0000:00:01.0: reg 0x14: [mem 0xf0800000-0xf080007f] [ 10.201665] pci 0000:00:01.0: reg 0x30: [mem 0x06080000-0x060bffff pref] [ 10.282856] pci 0000:00:02.0: [1011:0009] type 00 class 0x020000 [ 10.351672] pci 0000:00:02.0: reg 0x10: [io 0x10080-0x100ff] [ 10.421608] pci 0000:00:02.0: reg 0x14: [mem 0xf0801000-0xf080107f] [ 10.501676] pci 0000:00:02.0: reg 0x30: [mem 0x08000000-0x0803ffff pref] [ 10.583129] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 [ 10.661694] pci 0000:00:01.0: BAR 0: assigned [io 0x10000-0x1007f] [ 10.731621] pci 0000:00:01.0: BAR 1: assigned [mem 0xf0800000-0xf080007f] [ 10.811613] pci 0000:00:02.0: BAR 0: assigned [io 0x10080-0x100ff] [ 10.891613] pci 0000:00:02.0: BAR 1: assigned [mem 0xf0801000-0xf080107f] [ 10.973747] powersw: Soft power switch at 0xf0140000 enabled. [ 11.250492] SCSI subsystem initialized [ 11.296683] libata version 3.00 loaded. [ 11.298021] usbcore: registered new interface driver usbfs [ 11.362208] usbcore: registered new interface driver hub [ 11.426985] usbcore: registered new device driver usb [ 11.495589] VFS: Disk quotas dquot_6.6.0 [ 11.542298] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 11.765694] NET: Registered protocol family 2 [ 11.822837] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 6144 bytes, linear) [ 11.921977] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 12.012082] TCP bind hash table entries: 4096 (order: 4, 81920 bytes, linear) [ 12.101507] TCP: Hash tables configured (established 4096 bind 4096) [ 12.172550] UDP hash table entries: 256 (order: 1, 12288 bytes, linear) [ 12.251948] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes, linear) [ 12.341503] NET: Registered protocol family 1 [ 12.391787] PCI: CLS 16 bytes [ 12.471631] 0000:00:01.0: HP HSC NIC with card-mode Dino not yet supported. [ 12.551688] pci 0000:00:01.0: pci_fixup_tulip+0x0/0x84 took 126953 usecs [ 12.671631] 0000:00:02.0: HP HSC NIC with card-mode Dino not yet supported. [ 12.761646] pci 0000:00:02.0: pci_fixup_tulip+0x0/0x84 took 126953 usecs [ 12.845210] Unpacking initramfs... [ 27.168424] Freeing initrd memory: 23264K [ 27.213510] clocksource: cr16_unstable: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 18923370755 ns [ 27.332418] Enabling PDC chassis warnings support v0.05 [ 27.409030] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 27.496383] io scheduler mq-deadline registered [ 27.541767] io scheduler kyber registered [ 27.595185] EISA EEPROM at 0x0000c000 [ 27.644242] PDC Stable Storage facility v0.30 [ 28.121873] STI GSC/PCI core graphics driver Version 0.9b [ 28.351805] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 28.452016] 8:20:2: ttyS0 at MMIO 0xffe02800 (irq = 22, base_baud = 454545) is a 16550A [ 28.561635] Serial mux driver (8 ports) Revision: 0.6 [ 28.635775] ttyB0 at MMIO 0xf1100800 (irq = 0, base_baud = 0) is a Mux [ 28.717324] ttyB1 at MMIO 0xf1100880 (irq = 0, base_baud = 0) is a Mux [ 28.796744] ttyB2 at MMIO 0xf1100900 (irq = 0, base_baud = 0) is a Mux [ 28.881984] ttyB3 at MMIO 0xf1100980 (irq = 0, base_baud = 0) is a Mux [ 28.965403] ttyB4 at MMIO 0xf1100a00 (irq = 0, base_baud = 0) is a Mux [ 29.046914] ttyB5 at MMIO 0xf1100a80 (irq = 0, base_baud = 0) is a Mux [ 29.127294] ttyB6 at MMIO 0xf1100b00 (irq = 0, base_baud = 0) is a Mux [ 29.212026] ttyB7 at MMIO 0xf1100b80 (irq = 0, base_baud = 0) is a Mux [ 29.292524] printk: console [ttyB0] enabled [ 29.381658] printk: bootconsole [ttyB0] disabled [ 29.494854] parport_init_chip: initialize bidirectional-mode. [ 29.495522] parport0: PC-style at 0xffd02800, irq 18 [PCSPP,TRISTATE] [ 29.745206] loop: module loaded [ 29.745976] Uniform Multi-Platform E-IDE driver [ 29.773619] ide-gd driver 1.18 [ 29.831903] ide-cd driver 5.00 [ 29.877037] zalon_probe: Zalon version 1, IRQ 68 [ 29.901619] ncr53c720-0: rev 0xf irq 68 [ 29.964485] ncr53c720-0: ID 7, Fast-10, Parity Checking, Differential [ 30.011717] scsi host0: ncr53c8xx-3.4.3g [ 34.196525] scsi 0:0:8:0: Direct-Access SEAGATE ST32550W HP09 PQ: 0 ANSI: 2 [ 34.197534] scsi target0:0:8: Beginning Domain Validation [ 34.293878] scsi target0:0:8: asynchronous [ 34.373871] scsi target0:0:8: wide asynchronous [ 34.417303] scsi target0:0:8: FAST-10 WIDE SCSI 20.0 MB/s ST (100 ns, offset 8) [ 34.469816] scsi target0:0:8: Domain Validation skipping write tests [ 34.541604] scsi target0:0:8: Ending Domain Validation [ 34.656422] scsi 0:0:9:0: Direct-Access SEAGATE ST32550W HP09 PQ: 0 ANSI: 2 [ 34.682165] scsi target0:0:9: Beginning Domain Validation [ 34.783503] scsi target0:0:9: asynchronous [ 34.863591] scsi target0:0:9: wide asynchronous [ 34.906733] scsi target0:0:9: FAST-10 WIDE SCSI 20.0 MB/s ST (100 ns, offset 8) [ 34.959549] scsi target0:0:9: Domain Validation skipping write tests [ 35.031598] scsi target0:0:9: Ending Domain Validation [ 35.146091] scsi 0:0:10:0: Direct-Access SEAGATE ST32550W HP09 PQ: 0 ANSI: 2 [ 35.172125] scsi target0:0:10: Beginning Domain Validation [ 35.274119] scsi target0:0:10: asynchronous [ 35.354938] scsi target0:0:10: wide asynchronous [ 35.399411] scsi target0:0:10: FAST-10 WIDE SCSI 20.0 MB/s ST (100 ns, offset 8) [ 35.453242] scsi target0:0:10: Domain Validation skipping write tests [ 35.531609] scsi target0:0:10: Ending Domain Validation [ 35.642002] scsi 0:0:11:0: Direct-Access SEAGATE ST32550W HP09 PQ: 0 ANSI: 2 [ 35.672028] scsi target0:0:11: Beginning Domain Validation [ 35.771547] scsi target0:0:11: asynchronous [ 35.851834] scsi target0:0:11: wide asynchronous [ 35.896359] scsi target0:0:11: FAST-10 WIDE SCSI 20.0 MB/s ST (100 ns, offset 8) [ 35.950067] scsi target0:0:11: Domain Validation skipping write tests [ 36.021598] scsi target0:0:11: Ending Domain Validation [ 37.285304] 53c700: Version 2.8 By James.Bottomley@HansenPartnership.com [ 37.285530] scsi1: 53c710 rev 2 [ 38.367764] scsi host1: LASI SCSI 53c700 [ 38.388717] scsi 1:0:0:0: Sequential-Access HP HP35480A 1009 PQ: 0 ANSI: 2 [ 38.412156] scsi target1:0:0: Beginning Domain Validation [ 38.511583] scsi target1:0:0: asynchronous [ 38.603338] scsi target1:0:0: FAST-5 SCSI 5.0 MB/s ST (200 ns, offset 8) [ 38.642427] scsi target1:0:0: Domain Validation skipping write tests [ 38.701618] scsi target1:0:0: Ending Domain Validation [ 39.133355] scsi 1:0:2:0: CD-ROM TOSHIBA CD-ROM XM-5401TA 1036 PQ: 0 ANSI: 2 [ 39.134070] scsi target1:0:2: Beginning Domain Validation [ 39.222135] scsi target1:0:2: asynchronous [ 39.317734] scsi target1:0:2: FAST-5 SCSI 4.2 MB/s ST (236 ns, offset 8) [ 39.357352] scsi target1:0:2: Domain Validation skipping write tests [ 39.421657] scsi target1:0:2: Ending Domain Validation [ 40.790036] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [ 40.805218] st 1:0:0:0: Attached scsi tape st0 [ 40.861836] st 1:0:0:0: st0: try direct i/o: yes (alignment 16 B) [ 40.925960] sd 0:0:8:0: Power-on or device reset occurred [ 40.925346] sd 0:0:9:0: Power-on or device reset occurred [ 41.052788] sr 1:0:2:0: Power-on or device reset occurred [ 41.119286] sd 0:0:11:0: Power-on or device reset occurred [ 41.119286] sd 0:0:10:0: Power-on or device reset occurred [ 41.251281] sd 0:0:8:0: [sda] 4165272 512-byte logical blocks: (2.13 GB/1.99 GiB) [ 41.251281] sd 0:0:9:0: [sdb] 4165272 512-byte logical blocks: (2.13 GB/1.99 GiB) [ 41.313104] sd 0:0:11:0: [sdd] 4165272 512-byte logical blocks: (2.13 GB/1.99 GiB) [ 41.402714] sd 0:0:10:0: [sdc] 4165272 512-byte logical blocks: (2.13 GB/1.99 GiB) [ 41.492777] sd 0:0:8:0: [sda] Write Protect is off [ 41.582715] sr 1:0:2:0: [sr0] scsi-1 drive [ 41.671564] sd 0:0:8:0: [sda] Mode Sense: ab 00 10 08 [ 41.672901] sd 0:0:9:0: [sdb] Write Protect is off [ 41.672214] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 41.736425] sr 1:0:2:0: Attached scsi CD-ROM sr0 [ 41.771638] sd 0:0:9:0: [sdb] Mode Sense: ab 00 10 08 [ 41.842355] sd 0:0:11:0: [sdd] Write Protect is off [ 41.842799] sd 0:0:8:0: Attached scsi generic sg0 type 0 [ 41.901673] sd 0:0:11:0: [sdd] Mode Sense: ab 00 10 08 [ 41.961696] sd 0:0:9:0: Attached scsi generic sg1 type 0 [ 41.964695] sd 0:0:10:0: [sdc] Write Protect is off [ 42.025270] sd 0:0:10:0: Attached scsi generic sg2 type 0 [ 42.081609] sd 0:0:10:0: [sdc] Mode Sense: ab 00 10 08 [ 42.143103] sd 0:0:11:0: Attached scsi generic sg3 type 0 [ 42.144580] sd 0:0:8:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 42.205039] st 1:0:0:0: Attached scsi generic sg4 type 1 [ 42.272705] sd 0:0:11:0: [sdd] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 42.373442] sd 0:0:9:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 42.452268] sr 1:0:2:0: Attached scsi generic sg5 type 5 [ 42.653104] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de [ 42.715130] Linux Tulip driver version 1.1.15-NAPI (Feb 27, 2007) [ 42.715130] sdb: sdb1 [ 42.791748] tulip 0000:00:01.0: enabling SERR and PARITY (0000 -> 0140) [ 42.862818] sda: sda1 [ 42.891785] tulip: 0000:00:01.0: I/O region (0x0@0x0) too small, aborting [ 43.004728] tulip 0000:00:02.0: enabling SERR and PARITY (0000 -> 0140) [ 43.084417] tulip: 0000:00:02.0: I/O region (0x0@0x0) too small, aborting [ 43.091161] sd 0:0:8:0: [sda] Attached SCSI disk [ 43.162486] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 43.250191] sd 0:0:9:0: [sdb] Attached SCSI disk [ 43.291498] e100: Copyright(c) 1999-2006 Intel Corporation [ 43.292119] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 43.491502] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 43.572182] LASI 82596 driver - Revision: 1.30 [ 43.641775] Found i82596 at 0xffd07000, IRQ 17 [ 43.705991] eth0: 82596 at 0xffd07000, 08:00:09:e7:78:69 IRQ 17. [ 43.757628] sd 0:0:10:0: [sdc] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 43.757628] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 43.922350] ohci-pci: OHCI PCI platform driver [ 44.003201] uhci_hcd: USB Universal Host Controller Interface driver [ 44.056189] serio: gsc-ps2-keyboard port at 0xffd08000 irq 19 @ 8:16:7 [ 44.136096] serio: gsc-ps2-mouse port at 0xffd08100 irq 19 @ 8:16:8 [ 44.210700] HP SDC: No SDC found. [ 44.281664] HP SDC MLC: Registering the System Domain Controller's HIL MLC. [ 44.322910] HP SDC MLC: Request for raw HIL ISR hook denied [ 44.417415] mousedev: PS/2 mouse device common for all mice [ 44.475226] sdc: sdc1 [ 44.475226] sdd: sdd1 sdd2 sdd3 < sdd5 sdd6 > [ 44.576105] rtc-generic rtc-generic: registered as rtc0 [ 44.626064] hidraw: raw HID events driver (C) Jiri Kosina [ 44.697137] usbcore: registered new interface driver usbhid [ 44.741625] usbhid: USB HID core driver [ 44.817145] NET: Registered protocol family 17 [ 44.865704] sd 0:0:10:0: [sdc] Attached SCSI disk [ 44.913476] sd 0:0:11:0: [sdd] Attached SCSI disk [ 44.985349] rtc-generic rtc-generic: setting system clock to 2019-09-05T12:38:09 UTC (1567687089) [ 45.044255] Freeing unused kernel memory: 492K [ 45.164952] gscps2.c: timeout - could not write byte 0xed [ 45.165005] gscps2.c: sending byte 0xed failed. [ 45.502352] Write protected read-only-after-init data: 2k [ 45.502505] Run /init as init process [ 46.158849] gscps2.c: timeout - could not write byte 0xed [ 46.158947] gscps2.c: sending byte 0xed failed. [ 52.322264] random: crng init done [ 53.444482] sd 0:0:8:0: [sda] tag#233 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 [ 53.444779] sd 0:0:8:0: [sda] tag#233 Sense Key : 0x3 [current] [ 53.541784] sd 0:0:8:0: [sda] tag#233 ASC=0x11 ASCQ=0x0 [ 53.611786] sd 0:0:8:0: [sda] tag#233 CDB: opcode=0x28 28 00 00 3f 8d 90 00 00 08 00 [ 53.684338] blk_update_request: critical medium error, dev sda, sector 4165011 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [ 55.779138] sd 0:0:8:0: [sda] tag#193 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 [ 55.779453] sd 0:0:8:0: [sda] tag#193 Sense Key : 0x3 [current] [ 55.881660] sd 0:0:8:0: [sda] tag#193 ASC=0x11 ASCQ=0x0 [ 55.951767] sd 0:0:8:0: [sda] tag#193 CDB: opcode=0x28 28 00 00 3f 8d 90 00 00 08 00 [ 56.011688] blk_update_request: critical medium error, dev sda, sector 4165011 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 56.111649] Buffer I/O error on dev sda, logical block 520626, async page read [ 58.455880] sd 0:0:8:0: [sda] tag#205 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 [ 58.456175] sd 0:0:8:0: [sda] tag#205 Sense Key : 0x3 [current] [ 58.551561] sd 0:0:8:0: [sda] tag#205 ASC=0x10 ASCQ=0x0 [ 58.621552] sd 0:0:8:0: [sda] tag#205 CDB: opcode=0x28 28 00 00 3f 86 00 00 00 f8 00 [ 58.681535] blk_update_request: I/O error, dev sda, sector 4163139 op 0x0:(READ) flags 0x80700 phys_seg 6 prio class 0 [ 62.088536] sd 0:0:8:0: [sda] tag#216 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 [ 62.088814] sd 0:0:8:0: [sda] tag#216 Sense Key : 0x3 [current] [ 62.181539] sd 0:0:8:0: [sda] tag#216 ASC=0x11 ASCQ=0x0 [ 62.251542] sd 0:0:8:0: [sda] tag#216 CDB: opcode=0x28 28 00 00 3f 86 40 00 00 08 00 [ 62.321532] blk_update_request: critical medium error, dev sda, sector 4163139 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 62.411513] Buffer I/O error on dev sda1, logical block 520136, async page read [ 65.221096] EXT4-fs (sdd5): mounted filesystem with ordered data mode. Opts: (null) [ 70.276786] sd 0:0:8:0: [sda] tag#198 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 [ 70.277083] sd 0:0:8:0: [sda] tag#198 Sense Key : 0x3 [current] [ 70.371575] sd 0:0:8:0: [sda] tag#198 ASC=0x11 ASCQ=0x0 [ 70.441547] sd 0:0:8:0: [sda] tag#198 CDB: opcode=0x28 28 00 00 3f 86 00 00 00 f8 00 [ 70.501538] blk_update_request: critical medium error, dev sda, sector 4163139 op 0x0:(READ) flags 0x80700 phys_seg 12 prio class 0 [ 73.893046] sd 0:0:8:0: [sda] tag#209 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 [ 73.893323] sd 0:0:8:0: [sda] tag#209 Sense Key : 0x3 [current] [ 73.991550] sd 0:0:8:0: [sda] tag#209 ASC=0x11 ASCQ=0x0 [ 74.061541] sd 0:0:8:0: [sda] tag#209 CDB: opcode=0x28 28 00 00 3f 86 40 00 00 08 00 [ 74.121535] blk_update_request: critical medium error, dev sda, sector 4163139 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 74.211513] Buffer I/O error on dev sda1, logical block 520136, async page read [ 74.907062] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 81.554521] systemd[1]: systemd 242 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 81.559871] systemd[1]: Detected architecture parisc. [ 81.996689] systemd[1]: Set hostname to . [ 82.017573] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument [ 86.262055] systemd-system-update-generator[860]: Offline system update overridden by runlevel "single" on the kernel command line [ 87.429919] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 87.430457] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 89.294793] systemd[1]: /lib/systemd/system/dbus.socket:4: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly. [ 89.488200] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6. [ 89.542412] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6. [ 91.742927] systemd[1]: usr.mount: Unit is bound to inactive unit dev-sda1.device. Stopping, too. [ 91.802390] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 92.068537] systemd[1]: Listening on udev Control Socket. [ 92.228990] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 92.391357] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 92.594441] systemd[1]: Listening on Journal Socket. [ 92.751084] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 92.758288] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 92.931219] systemd[1]: Starting Load Kernel Modules... [ 93.229230] systemd[1]: Mounting Kernel Debug File System... [ 93.383441] systemd[1]: Listening on fsck to fsckd communication Socket. [ 93.556926] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 93.634666] systemd[1]: Starting Remount Root and Kernel File Systems... [ 93.821932] systemd[1]: Condition check resulted in Create list of required static device nodes for the current kernel being skipped. [ 93.824851] systemd[1]: Reached target Local Encrypted Volumes. [ 95.825895] EXT4-fs (sda1): re-mounted. Opts: (null) [ 95.854291] EXT4-fs (sdd5): re-mounted. Opts: errors=remount-ro [ 97.697006] systemd[1]: Starting Apply Kernel Variables... [ 99.407169] systemd[1]: Started Apply Kernel Variables. [ 99.591253] systemd[1]: Started Create System Users. [ 99.859060] systemd[1]: Starting Create Static Device Nodes in /dev... [ 101.231033] systemd[1]: Started Journal Service. [ 108.503570] sd 0:0:8:0: [sda] tag#207 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 [ 108.503884] sd 0:0:8:0: [sda] tag#207 Sense Key : 0x3 [current] [ 108.604278] sd 0:0:8:0: [sda] tag#207 ASC=0x11 ASCQ=0x0 [ 108.671774] sd 0:0:8:0: [sda] tag#207 CDB: opcode=0x28 28 00 00 3f 8d 90 00 00 08 00 [ 108.733967] blk_update_request: critical medium error, dev sda, sector 4165011 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [ 109.195707] sd 0:0:8:0: [sda] tag#201 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 [ 109.196033] sd 0:0:8:0: [sda] tag#201 Sense Key : 0x3 [current] [ 109.294202] sd 0:0:8:0: [sda] tag#201 ASC=0x11 ASCQ=0x0 [ 109.361707] sd 0:0:8:0: [sda] tag#201 CDB: opcode=0x28 28 00 00 3f 8d 90 00 00 08 00 [ 109.431939] blk_update_request: critical medium error, dev sda, sector 4165011 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 109.521645] Buffer I/O error on dev sda, logical block 520626, async page read [ 118.327329] sd 0:0:8:0: [sda] tag#210 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 [ 118.327647] sd 0:0:8:0: [sda] tag#210 Sense Key : 0x3 [current] [ 118.431769] sd 0:0:8:0: [sda] tag#210 ASC=0x10 ASCQ=0x0 [ 118.501626] sd 0:0:8:0: [sda] tag#210 CDB: opcode=0x28 28 00 00 3f 86 00 00 00 f8 00 [ 118.561599] blk_update_request: I/O error, dev sda, sector 4163139 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0 [ 121.835423] sd 0:0:8:0: [sda] tag#209 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 [ 121.835735] sd 0:0:8:0: [sda] tag#209 Sense Key : 0x3 [current] [ 121.931695] sd 0:0:8:0: [sda] tag#209 ASC=0x11 ASCQ=0x0 [ 122.011579] sd 0:0:8:0: [sda] tag#209 CDB: opcode=0x28 28 00 00 3f 86 40 00 00 08 00 [ 122.071548] blk_update_request: critical medium error, dev sda, sector 4163139 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 122.161532] Buffer I/O error on dev sda1, logical block 520136, async page read [ 139.431943] Adding 378876k swap on /dev/sdd6. Priority:-2 extents:1 across:378876k [ 143.496827] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null) [ 145.060173] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 145.598173] systemd-journald[873]: Received request to flush runtime journal from PID 1 [ 149.932094] eth0: link ok. /proc/cpuinfo: processor : 0 cpu family : PA-RISC 1.1c cpu : PA7200 (PCX-T') cpu MHz : 101.000000 physical id : 0 siblings : 1 core id : 0 capabilities : os32 nva_supported (0x02) model : 9000/831/D350 model name : UL Proc 2-way T'100 (831/D250,D350) hversion : 0x000058a0 sversion : 0x00000491 I-cache : 256 KB D-cache : 258 KB (WB, direct mapped) ITLB entries : 120 DTLB entries : 120 - shared with ITLB BTLB fixed : max. 16384 pages, pagesize=4096 (64MB) BTLB fix-entr. : 0 instruction, 0 data (16 combined) BTLB var-entr. : 0 instruction, 0 data (0 combined) bogomips : 100.24 software id : 2009865086 processor : 1 cpu family : PA-RISC 1.1c cpu : PA7200 (PCX-T') cpu MHz : 101.000000 physical id : 1 siblings : 1 core id : 0 capabilities : os32 nva_supported (0x02) model : 9000/831/D350 model name : UL Proc 2-way T'100 (831/D250,D350) hversion : 0x000058a0 sversion : 0x00000491 I-cache : 256 KB D-cache : 258 KB (WB, direct mapped) ITLB entries : 120 DTLB entries : 120 - shared with ITLB BTLB fixed : max. 16384 pages, pagesize=4096 (64MB) BTLB fix-entr. : 0 instruction, 0 data (16 combined) BTLB var-entr. : 0 instruction, 0 data (0 combined) bogomips : 100.24 software id : 2009865086 /proc/interrupts: CPU0 CPU1 16: 739 0 GSC-ASIC lasi700 17: 310 0 GSC-ASIC i82596 18: 0 0 GSC-ASIC parport0 19: 0 0 GSC-ASIC gsc-ps2-keyboard, gsc-ps2-mouse 20: 0 0 GSC-ASIC EISA 64: 31903 32108 CPU timer 65: 7125 6947 CPU IPI 66: 1049 0 CPU lasi 67: 0 0 CPU Dino 68: 0 2493 CPU zalon 71: 0 0 CPU wax STK: 4416 4096 Kernel stack usage IST: 3388 3388 Interrupt stack usage RES: 1456 2584 Rescheduling interrupts CAL: 5678 4365 Function call interrupts UAH: 0 0 Unaligned access handler traps FPA: 0 0 Floating point assist traps TLB: 1009 913 TLB shootdowns lspci: 00:01.0 Ethernet controller: Digital Equipment Corporation DECchip 21140 [FasterNet] (rev 22) Subsystem: Hewlett-Packard Company DECchip 21140 [FasterNet] Flags: medium devsel, IRQ 23 I/O ports at [disabled] Memory at (32-bit, non-prefetchable) [disabled] Expansion ROM at 06080000 [disabled] [size=256K] 00:02.0 Ethernet controller: Digital Equipment Corporation DECchip 21140 [FasterNet] (rev 22) Subsystem: Hewlett-Packard Company DECchip 21140 [FasterNet] Flags: medium devsel, IRQ 24 I/O ports at [disabled] Memory at (32-bit, non-prefetchable) [disabled] Expansion ROM at 08000000 [disabled] [size=256K]