daniele@d380server:/proc$ cat cpuinfo processor : 0 cpu family : PA-RISC 2.0 cpu : PA8000 (PCX-U) cpu MHz : 180.000000 model : 9000/810/D380 model name : UL proc 1-way U180 1M/1M hversion : 0x00005a90 sversion : 0x00000481 I-cache : 1024 KB D-cache : 1024 KB (WB) ITLB entries : 96 DTLB entries : 96 - shared with ITLB BTLB : not supported bogomips : 359.62 software id : 2014840459 daniele@d380server:~$ dmesg Linux version 2.4.21-32 (root@k2000) (gcc version 3.0.4) #1 Fri Jul 18 01:59:14 CEST 2003 FP[0] enabled: Rev 0 Model 14 The 32-bit Kernel has started... Determining PDC firmware type: System Map. model 00005a90 00000481 00000000 00000002 7818068b 100000f0 00000008 000000b2 00 0000b2 vers 00000301 CPUID vers 14 rev 11 (0x000001cb) capabilities 0x3 model 9000/810/D380 Total Memory: 256 Mb pagetable_init On node 0 totalpages: 65536 zone(0): 65536 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/sda4 HOME=/ console=ttyS0 TERM=vt102 palo_kernel= 2/vmlinux Console: colour dummy device 160x64 Calibrating delay loop... 359.62 BogoMIPS Memory: 255728k available Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) Inode cache hash table entries: 16384 (order: 5, 131072 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 ( Searching for devices... Found devices: 1. U2-IOA BC Runway Port (12) at 0xfff88000 [8], versions 0x580, 0xf, 0xb 2. Gecko BOA BC GSC+ Port (7) at 0xf1000000 [8/0], versions 0x500, 0x0, 0xc 3. UltraLight CAP/MUX (5) at 0xf1100000 [8/0/0], versions 0x10, 0x0, 0xd 4. Gecko BOA BC HP-PB Port (7) at 0xf113c000 [8/0/60], versions 0x103, 0x0, 0xc 5. Bluefish Add-on FW-SCSI (4) at 0xf1004000 [8/4], versions 0x13, 0x1, 0x89 6. UL 550 Lasi Core BA (11) at 0xffd00000 [8/16], versions 0x2f, 0x0, 0x81, additional addresses: 0xffd0c000 0xffc00000 7. UL 550 Core Centronics (10) at 0xffd02000 [8/16/0], versions 0x2f, 0x0, 0x74, additional addresses: 0xffd01000 0xffd03000 8. UL 550 Core SCSI (10) at 0xffd06000 [8/16/5], versions 0x2f, 0x0, 0x82 9. UL 350 Core LAN (802.3) (10) at 0xffd07000 [8/16/6], versions 0x2f, 0x0, 0x8a 10. UL 550 Core PS/2 Port (10) at 0xffd08000 [8/16/7], versions 0x2f, 0x0, 0x84 11. UL 550 Core PS/2 Port (10) at 0xffd08100 [8/16/8], versions 0x2f, 0x0, 0x84 12. UL 550 Core Wax BA (11) at 0xffe00000 [8/20], versions 0x31, 0x0, 0x8e 13. UL 550 Wax Core RS-232 (10) at 0xffe02000 [8/20/2], versions 0x31, 0x0, 0x8c 14. UL 550 Wax EISA BA (11) at 0xfc000000 [8/20/5], versions 0x31, 0x0, 0x90, additional addresses: 0xffc88000 15. U2-IOA BC GSC+ Port (7) at 0xf103f000 [8/63], versions 0x501, 0x1, 0xc 16. U2-IOA BC Runway Port (12) at 0xfff8a000 [10], versions 0x580, 0xf, 0xb 17. HP HSC-PCI Cards (4) at 0xf180c000 [10/12], versions 0x4, 0x0, 0x9d 18. U2-IOA BC GSC+ Port (7) at 0xf183f000 [10/63], versions 0x501, 0x1, 0xc 19. UL proc 1-way U180 1M/1M (0) at 0xfffa0000 [32], versions 0x5a9, 0x0, 0x4 20. Memory (1) at 0xfffb1000 [49], versions 0x7b, 0x0, 0x9 CPU(s): 1 x PA8000 (PCX-U) at 180.000000 MHz Found U2 at 0xfff88000 Found U2 at 0xfff8a000 Lasi version 0 at 0xffd00000 found. LED display at ffd0c000 registered Wax at 0xffe00000 found. Wax EISA Adapter found at 0xfc000000 EISA EEPROM at 0xffc88000 Enumerating EISA bus EISA slot 1: HWP5400 EISA IRQ 3 EISA slot 2 a configured board was not detected ( expected ___FFFF) Dino version 3.x (card mode) found at 0xf180c000 Dino: Failed to allocate memory region POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Soft power switch enabled, polling @ 0xf0140000. Starting kswapd Journalled Block Device driver loaded Installing knfsd (copyright (C) 1996 okir@monad.swb.de). parport_init_chip: initialize bidirectional-mode. parport0: PC-style at 0xffd02800, irq 88 [PCSPP,TRISTATE] STI GSC/PCI graphics driver version 0.9 pty: 256 Unix98 ptys configured PDC Software Console version 0.3 (2001-11-17), christoph.plattner@gmx.at Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI en abled ttyS00 at iomem 0xffe02800 (irq = 121) is a 16550A PS/2 keyboard port at 0xffd08000 (irq 69) found, no device attached. PS/2 psaux port at 0xffd08100 (irq 69) found, no device attached. lp0: using parport0 (interrupt-driven). Generic RTC Driver v1.07 RAMDISK driver initialized: 16 RAM disks of 6144K size 1024 blocksize loop: loaded (max 8 devices) Linux Tulip driver version 0.9.15-pre12 (Aug 9, 2002) PCI: Unable to reserve I/O region #1:80@50018000 for device 01:01.0 PCI: Unable to reserve I/O region #1:80@50018000 for device 01:01.0 Found i82596 at 0xffd07000, IRQ 87 eth0: 82596 at 0xffd07000, 08 00 09 B8 27 2E IRQ 87. 82596.c $Revision: 1.31 $ Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SCSI subsystem driver Revision: 1.00 zalon_scsi_callback: Zalon vers field is 0x1, IRQ 35 ncr53c8xx: 53c720 detected ncr53c720-0: ID 7, Fast-10, Parity Checking, Differential scsi0 : ncr53c8xx-3.4.3b-20010512 Vendor: SEAGATE Model: ST39173WC Rev: HP14 Type: Direct-Access ANSI SCSI revision: 02 Vendor: SEAGATE Model: ST39173WC Rev: HP14 Type: Direct-Access ANSI SCSI 53c700: Version 2.8 By James.Bottomley@HansenPartnership.com scsi1: 53c710 rev 2 scsi1 : LASI SCSI 53c700 scsi1: (0:0) Synchronous at offset 8, period 100ns Vendor: HP Model: C1533A Rev: AN04 Type: Sequential-Access ANSI SCSI revision: 02 scsi1: (2:0) Synchronous at offset 8, period 100ns Vendor: HP Model: DVD-ROM 6x/32x Rev: 1.08 Type: CD-ROM ANSI SCSI revision: 02 st: Version 20020805, bufsize 32768, wrt 30720, max init. bufs Attached scsi tape st0 at scsi1, channel 0, id 0, lun 0 Attached scsi disk sda at scsi0, channel 0, id 5, lun 0 Attached scsi disk sdb at scsi0, channel 0, id 8, lun 0 ncr53c720-0-<5,*>: FAST-10 WIDE SCSI 20.0 MB/s (100 ns, offset 8) SCSI device sda: 17783112 512-byte hdwr sectors (9105 MB) Partition check: sda: sda1 sda2 sda3 sda4 ncr53c720-0-<8,*>: FAST-10 WIDE SCSI 20.0 MB/s (100 ns, offset 8) SCSI device sdb: 17783112 512-byte hdwr sectors (9105 MB) sdb: unknown partition table Attached scsi CD-ROM sr0 at scsi1, channel 0, id 2, lun 0 sr0: scsi3-mmc drive: 0x/0x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12 STI GSC/PCI graphics driver version 0.9 BUG: Skipping previously registered driver: sti (native) usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik hid-core.c: USB HID support drivers mice: PS/2 mouse device common for all mice HP SDC: No SDC found. HP SDC MLC: Registering the System Domain Controller's HIL MLC. HP SDC MLC: Request for raw HIL ISR hook denied md: linear personality registered as nr 1 md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: raid5 personality registered as nr 4 raid5: measuring checksumming speed 8regs : 396.400 MB/sec 8regs_prefetch: 396.400 MB/sec 32regs : 306.800 MB/sec 32regs_prefetch: 306.800 MB/sec raid5: using function: 8regs_prefetch (396.400 MB/sec) md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 32768) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 245k freed Adding Swap: 499704k swap-space (priority -1) eth0: link ok.