[ 0.000000] Linux version 5.2.0-2-parisc64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (GCC)) #1 SMP Debian 5.2.7-1 (2019-08-07) [ 0.000000] CPU0: thread -1, cpu 0, socket 0 [ 0.000000] FP[0] enabled: Rev 1 Model 20 [ 0.000000] The 64-bit Kernel has started... [ 0.000000] Kernel default page size is 4 KB. Huge pages enabled with 1 MB physical and 2 MB virtual size. [ 0.000000] printk: bootconsole [ttyB0] enabled [ 0.000000] Initialized PDC Console for debugging. [ 0.000000] Determining PDC firmware type: 64 bit PAT. [ 0.000000] PAT: Running on cell 0 and location 1. [ 0.000000] PAT: legacy revision 0x24, pat_rev 0x201, pdc_cap 0x132, S-PTLB 0, HPMC_RENDEZ 0. [ 0.000000] model 00008950 00000491 00000000 00000002 3e14792c381d39d8 100000f0 00000008 000000b2 000000b2 [ 0.000000] vers 00000302 [ 0.000000] CPUID vers 20 rev 5 (0x00000285) [ 0.000000] capabilities 0x35 [ 0.000000] model 9000/800/rp3440 [ 0.000000] product A7137AR, original product A7137AR, S/N: DEH50118AM [ 0.000000] parisc_cache_init: Only equivalent aliasing supported! [ 0.000000] Memory Ranges: [ 0.000000] 0) Start 0x0000000000000000 End 0x000000003fffffff Size 1024 MB [ 0.000000] 1) Start 0x0000000100000000 End 0x00000001ffdfffff Size 4094 MB [ 0.000000] 2) Start 0x0000004040000000 End 0x00000040ffffffff Size 3072 MB [ 0.000000] Total Memory: 8190 MB [ 0.000000] initrd: 7e4b1000-7ffedf1e [ 0.000000] initrd: reserving 3e4b1000-3ffedf1e (mem_max 1ffe00000) [ 0.000000] PDT: type PDT_PAT_NEW, size 3000, entries 0, status 0, dbe_loc 0xffffffffffffffff, good_mem 0 MB [ 0.000000] PDT: Firmware reports all memory OK. [ 0.000000] On node 0 totalpages: 2096640 [ 0.000000] Normal zone: 32760 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 2096640 pages, LIFO batch:63 [ 0.000000] percpu: Embedded 36 pages/cpu s107264 r8192 d32000 u147456 [ 0.000000] pcpu-alloc: s107264 r8192 d32000 u147456 alloc=36*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 0.000000] SMP: bootstrap CPU ID is 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2063880 [ 0.000000] Kernel command line: root=LABEL=ROOT300r HOME=/ console=ttyS0 TERM=vt102 palo_kernel=2/vmlinux [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 8176184K/8386560K available (11848K kernel code, 4695K rwdata, 1687K rodata, 1024K init, 836K bss, 210376K reserved, 0K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0xd0/0x9c0 with crng_init=0 [ 0.000000] SLUB: HWalign=16, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] NR_IRQS: 128 [ 0.000013] sched_clock: 64 bits at 799MHz, resolution 1ns, wraps every 4398046511103ns [ 0.000681] Console: colour dummy device 160x64 [ 0.001122] Calibrating delay loop... 1594.36 BogoMIPS (lpj=3188736) [ 0.045292] pid_max: default: 32768 minimum: 301 [ 0.046008] LSM: Security Framework initializing [ 0.046259] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.048309] AppArmor: AppArmor initialized [ 0.048471] TOMOYO Linux initialized [ 0.049384] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.049766] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.056438] rcu: Hierarchical SRCU implementation. [ 0.058665] smp: Bringing up secondary CPUs ... [ 0.058825] smp: Brought up 1 node, 1 CPU [ 0.060523] devtmpfs: initialized [ 0.063382] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.063711] futex hash table entries: 2048 (order: 4, 65536 bytes) [ 0.089563] NET: Registered protocol family 16 [ 0.090028] audit: initializing netlink subsys (disabled) [ 0.091589] EISA bus registered [ 0.093136] Searching for devices... [ 0.101096] audit: type=2000 audit(1565861986.088:1): state=initialized audit_enabled=0 res=1 [ 0.225075] Found devices: [ 0.225187] 1. Storm Peak Slow Mako+ at 0xfffffffffe780000 [128] { 0, 0x0, 0x895, 0x00004 } [ 0.225708] 2. Storm Peak Slow Mako+ at 0xfffffffffe781000 [129] { 0, 0x0, 0x895, 0x00004 } [ 0.225992] 3. Storm Peak Slow Mako+ at 0xfffffffffe798000 [152] { 0, 0x0, 0x895, 0x00004 } [ 0.229082] 4. Storm Peak Slow Mako+ at 0xfffffffffe799000 [153] { 0, 0x0, 0x895, 0x00004 } [ 0.231351] 5. Everest Mako Memory at 0xfffffffffed08000 [8] { 1, 0x0, 0x0af, 0x00009 } [ 0.233083] 6. Pluto BC McKinley Port at 0xfffffffffed00000 [0] { 12, 0x0, 0x880, 0x0000c } [ 0.235305] 7. Mercury PCI Bridge at 0xfffffffffed20000 [0/0] { 13, 0x0, 0x783, 0x0000a } [ 0.237078] 8. Mercury PCI Bridge at 0xfffffffffed22000 [0/1] { 13, 0x0, 0x783, 0x0000a } [ 0.241078] 9. Mercury PCI Bridge at 0xfffffffffed24000 [0/2] { 13, 0x0, 0x783, 0x0000a } [ 0.241358] 10. Mercury PCI Bridge at 0xfffffffffed26000 [0/3] { 13, 0x0, 0x783, 0x0000a } [ 0.243578] 11. Mercury PCI Bridge at 0xfffffffffed28000 [0/4] { 13, 0x0, 0x783, 0x0000a } [ 0.245078] 12. Mercury PCI Bridge at 0xfffffffffed2c000 [0/6] { 13, 0x0, 0x783, 0x0000a } [ 0.247304] 13. Mercury PCI Bridge at 0xfffffffffed2e000 [0/7] { 13, 0x0, 0x783, 0x0000a } [ 0.249078] 14. BMC IPMI Mgmt Ctlr at 0xfffffff0f05b0000 [16] { 15, 0x0, 0x004, 0x000c0 } [ 0.251312] Enabling PDC_PAT chassis codes support v0.05 [ 0.855462] Logical CPU #0 is physical cpu #0 at location 0xffff0000ffff15 with hpa 0xfffffffffe780000 [ 0.863506] Logical CPU #1 is physical cpu #1 at location 0xffff0000ffff15 with hpa 0xfffffffffe781000 [ 0.863808] CPU1: thread -1, cpu 1, socket 0 [ 0.865413] Releasing cpu 1 now, hpa=fffffffffe781000 [ 0.929082] Logical CPU #2 is physical cpu #2 at location 0xffff0001ffff15 with hpa 0xfffffffffe798000 [ 0.929383] CPU2: thread -1, cpu 0, socket 1 [ 0.933652] Releasing cpu 2 now, hpa=fffffffffe798000 [ 1.001082] Logical CPU #3 is physical cpu #3 at location 0xffff0001ffff15 with hpa 0xfffffffffe799000 [ 1.001389] CPU3: thread -1, cpu 1, socket 1 [ 1.002026] Releasing cpu 3 now, hpa=fffffffffe799000 [ 1.073481] CPU(s): 4 out of 4 PA8900 (Shortfin) at 799.998500 MHz online [ 1.125259] alternatives: applied 60 out of 235 patches [ 1.198182] Whole cache flush 9595610 cycles, flushing 19922944 bytes 4526019 cycles [ 1.198205] Cache flush threshold set to 41248 KiB [ 1.200799] Whole TLB flush 41637 cycles, Range flush 19922944 bytes 1870196 cycles [ 1.201084] Calculated TLB flush threshold 1736 KiB [ 1.201553] TLB flush threshold set to 1736 KiB [ 1.273274] SBA found Pluto 2.3 at 0xfffffffffed00000 [ 1.313093] random: fast init done [ 1.761171] Mercury version TR3.2 (0x32) found at 0xfffffffffed20000 [ 1.893521] LBA 0:0: PCI host bridge to bus 0000:00 [ 1.893740] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 1.894203] pci_bus 0000:00: root bus resource [mem 0xffffffff80000000-0xffffffff8fffffff] (bus address [0x80000000-0x8fffffff]) [ 1.897096] pci_bus 0000:00: root bus resource [bus 00-07] [ 1.897368] pci 0000:00:01.0: [1033:0035] type 00 class 0x0c0310 [ 1.899498] pci 0000:00:01.0: reg 0x10: [mem 0xffffffff80002000-0xffffffff80002fff] [ 1.901262] pci 0000:00:01.0: supports D1 D2 [ 1.901427] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot [ 1.903782] pci 0000:00:01.1: [1033:0035] type 00 class 0x0c0310 [ 1.905126] pci 0000:00:01.1: reg 0x10: [mem 0xffffffff80001000-0xffffffff80001fff] [ 1.907024] pci 0000:00:01.1: supports D1 D2 [ 1.909085] pci 0000:00:01.1: PME# supported from D0 D1 D2 D3hot [ 1.909651] pci 0000:00:01.2: [1033:00e0] type 00 class 0x0c0320 [ 1.911450] pci 0000:00:01.2: reg 0x10: [mem 0xffffffff80000000-0xffffffff800000ff] [ 1.913232] pci 0000:00:01.2: supports D1 D2 [ 1.913397] pci 0000:00:01.2: PME# supported from D0 D1 D2 D3hot [ 1.915673] pci 0000:00:02.0: [1095:0649] type 00 class 0x01018f [ 1.915930] pci 0000:00:02.0: reg 0x10: [io 0x0d18-0x0d1f] [ 1.917100] pci 0000:00:02.0: reg 0x14: [io 0x0d24-0x0d27] [ 1.917325] pci 0000:00:02.0: reg 0x18: [io 0x0d10-0x0d17] [ 1.921100] pci 0000:00:02.0: reg 0x1c: [io 0x0d20-0x0d23] [ 1.923374] pci 0000:00:02.0: reg 0x20: [io 0x0d00-0x0d0f] [ 1.923665] pci 0000:00:02.0: supports D1 D2 [ 1.981162] Mercury version TR3.2 (0x32) found at 0xfffffffffed22000 [ 2.113533] LBA 0:1: PCI host bridge to bus 0000:20 [ 2.113752] pci_bus 0000:20: root bus resource [io 0x10000-0x1ffff] (bus address [0x0000-0xffff]) [ 2.114277] pci_bus 0000:20: root bus resource [mem 0xffffffff90000000-0xffffffff9fffffff] (bus address [0x90000000-0x9fffffff]) [ 2.116742] pci_bus 0000:20: root bus resource [bus 20-27] [ 2.117157] pci 0000:20:01.0: [1000:0021] type 00 class 0x010000 [ 2.117426] pci 0000:20:01.0: reg 0x10: [io 0x12100-0x121ff] [ 2.121107] pci 0000:20:01.0: reg 0x14: [mem 0xffffffff90015000-0xffffffff900153ff 64bit] [ 2.123336] pci 0000:20:01.0: reg 0x1c: [mem 0xffffffff90012000-0xffffffff90013fff 64bit] [ 2.125171] pci 0000:20:01.0: supports D1 D2 [ 2.125713] pci 0000:20:01.1: [1000:0021] type 00 class 0x010000 [ 2.127378] pci 0000:20:01.1: reg 0x10: [io 0x12000-0x120ff] [ 2.127611] pci 0000:20:01.1: reg 0x14: [mem 0xffffffff90014000-0xffffffff900143ff 64bit] [ 2.129105] pci 0000:20:01.1: reg 0x1c: [mem 0xffffffff90010000-0xffffffff90011fff 64bit] [ 2.131370] pci 0000:20:01.1: supports D1 D2 [ 2.133539] pci 0000:20:02.0: [14e4:1645] type 00 class 0x020000 [ 2.135434] pci 0000:20:02.0: reg 0x10: [mem 0xffffffff90000000-0xffffffff9000ffff 64bit] [ 2.137217] pci 0000:20:02.0: PME# supported from D3hot D3cold [ 2.193166] Mercury version TR3.2 (0x32) found at 0xfffffffffed24000 [ 2.325580] LBA 0:2: PCI host bridge to bus 0000:40 [ 2.325793] pci_bus 0000:40: root bus resource [io 0x20000-0x2ffff] (bus address [0x0000-0xffff]) [ 2.326336] pci_bus 0000:40: root bus resource [mem 0xffffffffa0000000-0xffffffffafffffff] (bus address [0xa0000000-0xafffffff]) [ 2.329090] pci_bus 0000:40: root bus resource [bus 40-47] [ 2.385166] Mercury version TR3.2 (0x32) found at 0xfffffffffed26000 [ 2.513533] LBA 0:3: PCI host bridge to bus 0000:60 [ 2.513749] pci_bus 0000:60: root bus resource [io 0x30000-0x3ffff] (bus address [0x0000-0xffff]) [ 2.514295] pci_bus 0000:60: root bus resource [mem 0xffffffffb0000000-0xffffffffbfffffff] (bus address [0xb0000000-0xbfffffff]) [ 2.517095] pci_bus 0000:60: root bus resource [bus 60-67] [ 2.519330] pci 0000:60:01.0: [14e4:1645] type 00 class 0x020000 [ 2.521150] pci 0000:60:01.0: reg 0x10: [mem 0xffffffffb0000000-0xffffffffb000ffff 64bit] [ 2.523380] pci 0000:60:01.0: PME# supported from D3hot [ 2.581165] Mercury version TR3.2 (0x32) found at 0xfffffffffed28000 [ 2.645108] LBA: lmmio_space [0xffffffffc0000000-0xffffffffdfffffff] - new [ 2.709521] LBA 0:4: PCI host bridge to bus 0000:80 [ 2.709740] pci_bus 0000:80: root bus resource [io 0x40000-0x4ffff] (bus address [0x0000-0xffff]) [ 2.713093] pci_bus 0000:80: root bus resource [mem 0xffffffffc0000000-0xffffffffdfffffff] (bus address [0xc0000000-0xdfffffff]) [ 2.717092] pci_bus 0000:80: root bus resource [bus 80-87] [ 2.773166] Mercury version TR3.2 (0x32) found at 0xfffffffffed2c000 [ 2.905574] LBA 0:6: PCI host bridge to bus 0000:c0 [ 2.905796] pci_bus 0000:c0: root bus resource [io 0x50000-0x5ffff] (bus address [0x0000-0xffff]) [ 2.907554] pci_bus 0000:c0: root bus resource [mem 0xffffffffe0000000-0xffffffffefffffff] (bus address [0xe0000000-0xefffffff]) [ 2.913093] pci_bus 0000:c0: root bus resource [bus c0-c7] [ 2.969167] Mercury version TR3.2 (0x32) found at 0xfffffffffed2e000 [ 3.033108] LBA: lmmio_space [0xfffffffff0000000-0xfffffffffe77ffff] - new [ 3.101537] LBA 0:7: PCI host bridge to bus 0000:e0 [ 3.101752] pci_bus 0000:e0: root bus resource [io 0x60000-0x6ffff] (bus address [0x0000-0xffff]) [ 3.102310] pci_bus 0000:e0: root bus resource [mem 0xfffffffff0000000-0xfffffffffe77ffff] (bus address [0xf0000000-0xfe77ffff]) [ 3.105095] pci_bus 0000:e0: root bus resource [bus e0-e7] [ 3.105163] pci 0000:e0:01.0: [103c:1290] type 00 class 0x078000 [ 3.105488] pci 0000:e0:01.0: reg 0x18: [mem 0xfffffffff4051000-0xfffffffff405100f] [ 3.109185] pci 0000:e0:01.0: Hiding Diva built-in AUX serial device [ 3.117535] pci 0000:e0:01.1: [103c:1048] type 00 class 0x070002 [ 3.117798] pci 0000:e0:01.1: reg 0x10: [mem 0xfffffffff4050000-0xfffffffff4050fff] [ 3.117798] pci 0000:e0:01.1: reg 0x18: [mem 0xfffffffff4020000-0xfffffffff403ffff pref] [ 3.121295] pci 0000:e0:02.0: [1002:5159] type 00 class 0x030000 [ 3.123029] pci 0000:e0:02.0: reg 0x10: [mem 0xfffffffff0000000-0xfffffffff3ffffff pref] [ 3.123335] pci 0000:e0:02.0: reg 0x14: [io 0x6e000-0x6e0ff] [ 3.125107] pci 0000:e0:02.0: reg 0x18: [mem 0xfffffffff4040000-0xfffffffff404ffff] [ 3.129161] pci 0000:e0:02.0: reg 0x30: [mem 0xfffffffff4000000-0xfffffffff401ffff pref] [ 3.131362] pci 0000:e0:02.0: Hiding Diva built-in ATI card [ 3.131617] pci 0000:e0:02.0: supports D1 D2 [ 3.135927] powersw: Soft power switch support not available. [ 3.145372] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 14.929138] random: crng init done [ 41.065469] alg: No test for lzo-rle (lzo-rle-generic) [ 41.065769] alg: No test for lzo-rle (lzo-rle-scomp) [ 41.069503] pci 0000:e0:02.0: vgaarb: setting as boot VGA device [ 41.073051] pci 0000:e0:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 41.077109] pci 0000:e0:02.0: vgaarb: bridge control possible [ 41.089085] vgaarb: loaded [ 41.089780] pps_core: LinuxPPS API ver. 1 registered [ 41.097077] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 41.105109] PTP clock support registered [ 41.209110] VFS: Disk quotas dquot_6.6.0 [ 41.209386] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 41.212330] AppArmor: AppArmor Filesystem Enabled [ 41.225618] NET: Registered protocol family 2 [ 41.226906] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes) [ 41.229240] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 41.237162] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 41.245827] TCP: Hash tables configured (established 65536 bind 65536) [ 41.246431] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 41.253216] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 41.261751] NET: Registered protocol family 1 [ 41.261951] NET: Registered protocol family 44 [ 41.269077] PCI: CLS 16 bytes [ 41.313200] pci 0000:00:01.0: quirk_usb_early_handoff+0x0/0xc40 took 42968 usecs [ 41.357200] pci 0000:00:01.1: quirk_usb_early_handoff+0x0/0xc40 took 42968 usecs [ 41.401205] pci 0000:00:01.2: quirk_usb_early_handoff+0x0/0xc40 took 42968 usecs [ 41.402146] Trying to unpack rootfs image as initramfs... [ 43.413187] Freeing initrd memory: 27888K [ 43.413379] clocksource: cr16_unstable: mask: 0xffffffffffffffff max_cycles: 0xb88110f9ac, max_idle_ns: 440795222976 ns [ 43.417092] Chassis warnings not supported. [ 43.417365] Performance monitoring counters enabled for Storm Peak Slow Mako+ [ 43.473903] Initialise system trusted keyrings [ 43.474129] Key type blacklist registered [ 43.477304] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 43.491915] zbud: loaded [ 43.495321] Platform Keyring initialized [ 43.495489] Key type asymmetric registered [ 43.495638] Asymmetric key parser 'x509' registered [ 43.497164] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 43.509178] io scheduler mq-deadline registered [ 43.511200] PDC Stable Storage facility v0.30 [ 43.557137] STI GSC/PCI core graphics driver Version 0.9b [ 43.561183] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 43.605329] printk: console [ttyS0] disabled [ 43.625101] 0000:e0:01.1: ttyS0 at MMIO 0xfffffffff4050000 (irq = 74, base_baud = 115200) is a 16550A [ 43.625724] printk: console [ttyS0] enabled [ 43.626296] printk: bootconsole [ttyB0] disabled [ 43.657094] 0000:e0:01.1: ttyS1 at MMIO 0xfffffffff4050010 (irq = 74, base_baud = 115200) is a 16550A [ 43.681094] 0000:e0:01.1: ttyS2 at MMIO 0xfffffffff4050038 (irq = 74, base_baud = 115200) is a 16550A [ 43.681652] Linux agpgart interface v0.103 [ 43.681754] quicksilver: No AGP devices found. [ 43.682269] mousedev: PS/2 mouse device common for all mice [ 43.697232] rtc-generic rtc-generic: registered as rtc0 [ 43.697448] ledtrig-cpu: registered to indicate activity on CPUs [ 43.702725] NET: Registered protocol family 10 [ 43.847352] Segment Routing with IPv6 [ 43.847352] mip6: Mobile IPv6 [ 43.847352] NET: Registered protocol family 17 [ 43.849270] mpls_gso: MPLS GSO support [ 43.849362] registered taskstats version 1 [ 43.849363] Loading compiled-in X.509 certificates [ 47.045940] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 47.046334] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def' [ 47.047027] zswap: loaded using pool lzo/zbud [ 47.047817] AppArmor: AppArmor sha1 policy hashing enabled [ 47.061157] rtc-generic rtc-generic: setting system clock to 2019-08-15T09:40:33 UTC (1565862033) [ 47.062867] Unstable clock detected, switching default tracing clock to "global" If you want to keep using the local clock, then add: "trace_clock=local" on the kernel command line [ 47.127542] Freeing unused kernel memory: 1024K [ 47.225142] Write protected read-only-after-init data: 85k [ 47.225326] Run /init as init process [ 48.774021] SCSI subsystem initialized [ 49.985498] tg3.c:v3.137 (May 11, 2014) [ 50.521736] libata version 3.00 loaded. [ 50.565458] usbcore: registered new interface driver usbfs [ 50.565521] usbcore: registered new interface driver hub [ 50.566203] usbcore: registered new device driver usb [ 51.157561] pata_cmd64x 0000:00:02.0: Secondary port is disabled [ 51.485965] scsi host0: pata_cmd64x [ 51.525367] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 51.697446] scsi host1: pata_cmd64x [ 51.698186] ata1: PATA max UDMA/100 cmd 0xd18 ctl 0xd24 bmdma 0xd00 irq 69 [ 51.701085] ata2: DUMMY [ 51.773029] pata_cmd64x: active 10 recovery 10 setup 3. [ 51.773029] pata_cmd64x: active 10 recovery 10 setup 3. [ 52.049951] ata1.00: ATAPI: DVD-ROM DW-224EV, K.DA, max UDMA/33 [ 52.050191] pata_cmd64x: active 3 recovery 1 setup 1. [ 52.269015] scsi 0:0:0:0: CD-ROM TEAC DVD-ROM DW-224EV K.DA PQ: 0 ANSI: 5 [ 52.393352] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 52.785281] ehci-pci: EHCI PCI platform driver [ 52.869306] ehci-pci 0000:00:01.2: EHCI Host Controller [ 52.869603] ehci-pci 0000:00:01.2: new USB bus registered, assigned bus number 1 [ 52.870353] ehci-pci 0000:00:01.2: irq 68, io mem 0xffffffff80000000 [ 52.913272] ehci-pci 0000:00:01.2: USB 2.0 started, EHCI 0.95 [ 52.914075] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02 [ 52.914563] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 52.914563] usb usb1: Product: EHCI Host Controller [ 52.914563] usb usb1: Manufacturer: Linux 5.2.0-2-parisc64 ehci_hcd [ 52.929207] sym0: <1010-66> rev 0x1 at pci 0000:20:01.0 irq 70 [ 52.929091] usb usb1: SerialNumber: 0000:00:01.2 [ 52.933861] sym0: No NVRAM, ID 7, Fast-80, LVD, parity checking [ 52.937565] hub 1-0:1.0: USB hub found [ 52.949191] hub 1-0:1.0: 5 ports detected [ 53.121051] sym0: SCSI BUS has been reset. [ 53.141187] scsi host2: sym-2.2.3 [ 53.565249] ohci-pci: OHCI PCI platform driver [ 53.653252] ohci-pci 0000:00:01.0: OHCI PCI host controller [ 53.653560] ohci-pci 0000:00:01.0: new USB bus registered, assigned bus number 2 [ 53.654690] ohci-pci 0000:00:01.0: irq 66, io mem 0xffffffff80002000 [ 53.757092] sym1: <1010-66> rev 0x1 at pci 0000:20:01.1 irq 71 [ 53.761376] sym1: No NVRAM, ID 7, Fast-80, LVD, parity checking [ 53.821051] sym1: SCSI BUS has been reset. [ 53.821125] scsi host3: sym-2.2.3 [ 54.219366] tg3 0000:20:02.0 eth0: Tigon3 [partno(BCM95700A6) rev 0105] (PCI:66MHz:64-bit) MAC address 00:16:35:73:70:73 [ 54.219989] tg3 0000:20:02.0 eth0: attached PHY is 5701 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 54.233129] tg3 0000:20:02.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[0] [ 54.233395] tg3 0000:20:02.0 eth0: dma_rwctrl[76ff2d0f] dma_mask[32-bit] [ 54.277598] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.02 [ 54.277893] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 54.278407] usb usb2: Product: OHCI PCI host controller [ 54.285087] usb usb2: Manufacturer: Linux 5.2.0-2-parisc64 ohci_hcd [ 54.285304] usb usb2: SerialNumber: 0000:00:01.0 [ 54.297415] hub 2-0:1.0: USB hub found [ 54.297415] hub 2-0:1.0: 3 ports detected [ 54.345176] ohci-pci 0000:00:01.1: OHCI PCI host controller [ 54.345468] ohci-pci 0000:00:01.1: new USB bus registered, assigned bus number 3 [ 54.349235] ohci-pci 0000:00:01.1: irq 67, io mem 0xffffffff80001000 [ 54.919417] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.02 [ 54.919417] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 54.919417] usb usb3: Product: OHCI PCI host controller [ 54.925110] usb usb3: Manufacturer: Linux 5.2.0-2-parisc64 ohci_hcd [ 54.925329] usb usb3: SerialNumber: 0000:00:01.1 [ 54.933515] hub 3-0:1.0: USB hub found [ 54.933715] hub 3-0:1.0: 2 ports detected [ 55.659359] tg3 0000:60:01.0 eth1: Tigon3 [partno(A6825-60101) rev 0105] (PCI:66MHz:64-bit) MAC address 00:30:6e:f4:47:8c [ 55.660000] tg3 0000:60:01.0 eth1: attached PHY is 5701 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 55.669119] tg3 0000:60:01.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[0] [ 55.669388] tg3 0000:60:01.0 eth1: dma_rwctrl[76ff2d0f] dma_mask[32-bit] [ 55.877558] tg3 0000:20:02.0 enp32s2: renamed from eth0 [ 56.213688] tg3 0000:60:01.0 enp96s1: renamed from eth1 [ 56.237877] scsi 2:0:0:0: Direct-Access COMPAQ BD30089BBA HPB1 PQ: 0 ANSI: 3 [ 56.237877] scsi target2:0:0: tagged command queuing enabled, command queue depth 16. [ 56.253121] scsi target2:0:0: Beginning Domain Validation [ 56.261096] scsi target2:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31) [ 56.269159] scsi 2:0:0:0: Power-on or device reset occurred [ 56.273187] scsi target2:0:0: Ending Domain Validation [ 56.285195] scsi 2:0:1:0: Direct-Access SEAGATE ST373454LC D402 PQ: 0 ANSI: 3 [ 56.285426] scsi target2:0:1: tagged command queuing enabled, command queue depth 16. [ 56.297103] scsi target2:0:1: Beginning Domain Validation [ 56.305084] scsi target2:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31) [ 56.309159] scsi 2:0:1:0: Power-on or device reset occurred [ 56.313196] scsi target2:0:1: Ending Domain Validation [ 57.545219] scsi 3:0:2:0: Direct-Access COMPAQ BF07288285 HPB3 PQ: 0 ANSI: 3 [ 57.545405] scsi target3:0:2: tagged command queuing enabled, command queue depth 16. [ 57.561108] scsi target3:0:2: Beginning Domain Validation [ 57.569095] scsi target3:0:2: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31) [ 57.573160] scsi 3:0:2:0: Power-on or device reset occurred [ 57.577183] scsi target3:0:2: Ending Domain Validation [ 60.473120] sd 2:0:0:0: [sda] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 60.473196] sd 2:0:1:0: [sdb] 143374650 512-byte logical blocks: (73.4 GB/68.4 GiB) [ 60.473449] sd 2:0:0:0: [sda] Write Protect is off [ 60.473196] sd 2:0:1:0: [sdb] Write Protect is off [ 60.481108] sd 2:0:0:0: [sda] Mode Sense: cf 00 10 08 [ 60.481256] sd 2:0:1:0: [sdb] Mode Sense: ab 00 10 08 [ 60.481309] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 60.481331] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 60.589214] sda: sda1 sda2 sda3 [ 60.633227] sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 > [ 60.681184] sd 2:0:0:0: [sda] Attached SCSI disk [ 60.689186] sd 2:0:1:0: [sdb] Attached SCSI disk [ 61.158811] sd 3:0:2:0: [sdc] 142264000 512-byte logical blocks: (72.8 GB/67.8 GiB) [ 61.161140] sd 3:0:2:0: [sdc] Write Protect is off [ 61.161140] sd 3:0:2:0: [sdc] Mode Sense: d3 00 10 08 [ 61.161174] sd 3:0:2:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 61.229232] sdc: sdc1 [ 61.281182] sd 3:0:2:0: [sdc] Attached SCSI disk [ 62.137939] sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray [ 62.137939] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 62.146443] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 64.562355] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 65.309224] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 66.533884] systemd[1]: Inserted module 'autofs4' [ 67.205548] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid) [ 67.214080] systemd[1]: Detected architecture parisc64. [ 67.353159] systemd[1]: Set hostname to . [ 68.545512] systemd-fstab-generator[207]: Checking was requested for "tmpfs", but it is not a device. [ 70.232397] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 70.322258] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 70.455603] systemd[1]: Created slice User and Session Slice. [ 70.546258] systemd[1]: Listening on Journal Socket. [ 70.672426] systemd[1]: Starting Load Kernel Modules... [ 70.767198] systemd[1]: Listening on LVM2 poll daemon socket. [ 70.860096] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 72.317252] systemd[1]: Starting Availability of block devices... [ 72.410111] systemd[1]: Listening on Journal Audit Socket. [ 73.019222] systemd[1]: Starting Journal Service... [ 73.110445] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 73.201647] systemd[1]: Reached target Local Encrypted Volumes. [ 73.289667] systemd[1]: Reached target Paths. [ 73.413243] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 73.509593] systemd[1]: Created slice system-getty.slice. [ 73.601165] systemd[1]: Listening on fsck to fsckd communication Socket. [ 73.689761] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 74.066373] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro [ 76.536925] systemd-journald[221]: Received request to flush runtime journal from PID 1 [ 79.537335] IPMI message handler: version 39.2 [ 79.830522] ipmi device interface [ 80.028216] ipmi_si: IPMI System Interface driver [ 80.029539] ipmi_si: Adding device-tree-specified kcs state machine [ 80.030353] ipmi_si: Trying device-tree-specified kcs state machine at mem address 0xfffffff0f05b0000, slave address 0x0, irq 0 [ 80.965499] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 80.966034] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 80.966756] sd 2:0:1:0: Attached scsi generic sg2 type 0 [ 80.967255] sd 3:0:2:0: Attached scsi generic sg3 type 0 [ 81.517696] ipmi 16: IPMI message handler: Found new BMC (man_id: 0x00000b, prod_id: 0x8201, dev_id: 0x32) [ 81.524250] ipmi 16: IPMI kcs interface initialized [ 85.057593] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem [ 85.089644] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 92.693127] Adding 42991612k swap on /swapfile. Priority:-2 extents:31 across:46014460k FS [ 94.289179] audit: type=1400 audit(1565862080.728:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=302 comm="apparmor_parser" [ 94.289946] audit: type=1400 audit(1565862080.728:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=302 comm="apparmor_parser" [ 94.305172] audit: type=1400 audit(1565862080.728:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=303 comm="apparmor_parser" [ 94.342534] audit: type=1400 audit(1565862080.780:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=304 comm="apparmor_parser" [ 94.345153] audit: type=1400 audit(1565862080.780:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=304 comm="apparmor_parser" [ 94.357143] audit: type=1400 audit(1565862080.780:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=304 comm="apparmor_parser" [ 94.369679] audit: type=1400 audit(1565862080.808:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=305 comm="apparmor_parser" [ 94.381180] audit: type=1400 audit(1565862080.808:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/msmtp" pid=301 comm="apparmor_parser" [ 94.389292] audit: type=1400 audit(1565862080.808:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/msmtp//helpers" pid=301 comm="apparmor_parser" [ 99.692191] tg3 0000:20:02.0 enp32s2: Link is up at 1000 Mbps, full duplex [ 99.692191] tg3 0000:20:02.0 enp32s2: Flow control is off for TX and off for RX [ 99.692191] IPv6: ADDRCONF(NETDEV_CHANGE): enp32s2: link becomes ready