[ 0.000000] Linux version 3.10.0-rc6-64bit+ (deller@ls3530) (gcc version 4.7.2 20121105 (Red Hat 4.7.2-2.aa.20121114svn) (GCC) ) #103 SMP Wed Jun 19 20:54:06 CEST 2013 [ 0.000000] unwind_init: start = 0x40897000, end = 0x408dd8c0, entries = 18060 [ 0.000000] FP[0] enabled: Rev 1 Model 19 [ 0.000000] The 64-bit Kernel has started... [ 0.000000] Default page size is 4KB. [ 0.000000] bootconsole [ttyB0] enabled [ 0.000000] Initialized PDC Console for debugging. [ 0.000000] Determining PDC firmware type: 64 bit PAT. [ 0.000000] model 00005df0 00000491 00000000 00000002 462e613f 100000f1 00000008 000000b2 000000b2 [ 0.000000] vers 00000301 [ 0.000000] CPUID vers 19 rev 11 (0x0000026b) [ 0.000000] capabilities 0x5 [ 0.000000] model 9000/800/L3000-8x [ 0.000000] Memory Ranges: [ 0.000000] 0) Start 0x0000000000000000 End 0x000000007fffffff Size 2048 MB [ 0.000000] 1) Start 0x0000000180000000 End 0x00000001ffffffff Size 2048 MB [ 0.000000] Total Memory: 4096 MB [ 0.000000] On node 0 totalpages: 524288 [ 0.000000] free_area_init_node: node 0, pgdat 408f9800, node_mem_map 412b9000 [ 0.000000] Normal zone: 7168 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 524288 pages, LIFO batch:31 [ 0.000000] On node 1 totalpages: 524288 [ 0.000000] free_area_init_node: node 1, pgdat 408fa540, node_mem_map 1c0000000 [ 0.000000] Normal zone: 7168 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 524288 pages, LIFO batch:31 [ 0.000000] PERCPU: Embedded 14 pages/cpu @0000000042ec8000 s27072 r8192 d22080 u57344 [ 0.000000] pcpu-alloc: s27072 r8192 d22080 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 0.000000] SMP: bootstrap CPU ID is 0 [ 0.000000] Built 2 zonelists in Zone order, mobility grouping on. Total pages: 1034240 [ 0.000000] Kernel command line: HOME=/ root=/dev/sda5 rootls3011=sda5 rootls3017_3545=sda3 ip=bootp panic_timeout=60 panic=-1 console=ttyS0 TERM=vt102 palo_kernel=0/vmlinux [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Sorting __ex_table... [ 0.000000] Memory: 4111176k/4194304k available (6754k kernel code, 83128k reserved, 2220k data, 364k init) [ 0.000000] virtual kernel memory layout: [ 0.000000] vmalloc : 0x0000000000008000 - 0x000000003f000000 (1007 MB) [ 0.000000] memory : 0x0000000040000000 - 0x0000000240000000 (8192 MB) [ 0.000000] .init : 0x0000000040b2c000 - 0x0000000040b87000 ( 364 kB) [ 0.000000] .data : 0x0000000040798ae8 - 0x00000000409c3c40 (2220 kB) [ 0.000000] .text : 0x0000000040100000 - 0x0000000040798ae8 (6754 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=8 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32 [ 0.000000] NR_IRQS:128 [ 0.000000] Console: colour dummy device 160x64 [ 0.136000] Calibrating delay loop... 1744.89 BogoMIPS (lpj=3489792) [ 0.276000] pid_max: default: 32768 minimum: 301 [ 0.276000] Mount-cache hash table entries: 256 [ 0.280000] Brought up 1 CPUs [ 0.416000] devtmpfs: initialized [ 0.420000] atomic64 test passed [ 0.420000] regulator-dummy: no parameters [ 0.552000] NET: Registered protocol family 16 [ 0.556000] Searching for devices... [ 1.148000] Found devices: [ 1.148000] 1. Marcato W+? (rp5470) at 0xfffffffffed21000 [33] { 0, 0x0, 0x5df, 0x00000 } [ 1.148000] 2. Marcato W+? (rp5470) at 0xfffffffffed25000 [37] { 0, 0x0, 0x5df, 0x00000 } [ 1.148000] 3. Marcato W+? (rp5470) at 0xfffffffffed61000 [97] { 0, 0x0, 0x5df, 0x00000 } [ 1.152000] 4. Marcato W+? (rp5470) at 0xfffffffffed65000 [101] { 0, 0x0, 0x5df, 0x00000 } [ 1.156000] 5. DEW BC Runway Port at 0xfffffffffed20000 [32] { 7, 0x0, 0x584, 0x0000c } [ 1.228000] 6. DEW BC Runway Port at 0xfffffffffed24000 [36] { 7, 0x0, 0x584, 0x0000c } [ 1.368000] 7. DEW BC Runway Port at 0xfffffffffed60000 [96] { 7, 0x0, 0x584, 0x0000c } [ 1.508000] 8. DEW BC Runway Port at 0xfffffffffed64000 [100] { 7, 0x0, 0x584, 0x0000c } [ 1.508000] 9. Memory at 0xfffffffffedc0000 [192] { 1, 0x0, 0x090, 0x00009 } [ 1.648000] 10. IKE I/O BC Merced Port at 0xfffffffffed00000 [0] { 7, 0x0, 0x803, 0x0000c } [ 1.784000] 11. Elroy PCI Bridge at 0xffffffff9ffe0000 [0/0] { 13, 0x0, 0x782, 0x0000a } [ 1.928000] 12. Elroy PCI Bridge at 0xffffffff9ffe2000 [0/1] { 13, 0x0, 0x782, 0x0000a } [ 2.064000] 13. Elroy PCI Bridge at 0xffffffff9ffe4000 [0/2] { 13, 0x0, 0x782, 0x0000a } [ 2.064000] 14. Elroy PCI Bridge at 0xffffffff9ffe6000 [0/3] { 13, 0x0, 0x782, 0x0000a } [ 2.204000] 15. Elroy PCI Bridge at 0xffffffff9ffe8000 [0/4] { 13, 0x0, 0x782, 0x0000a } [ 2.344000] 16. Elroy PCI Bridge at 0xffffffff9ffea000 [0/5] { 13, 0x0, 0x782, 0x0000a } [ 2.484000] 17. Elroy PCI Bridge at 0xffffffff9fff0000 [0/8] { 13, 0x0, 0x782, 0x0000a } [ 2.624000] 18. Elroy PCI Bridge at 0xffffffff9fff2000 [0/9] { 13, 0x0, 0x782, 0x0000a } [ 2.764000] 19. Elroy PCI Bridge at 0xffffffff9fff4000 [0/10] { 13, 0x0, 0x782, 0x0000a } [ 2.764000] 20. Elroy PCI Bridge at 0xffffffff9fff8000 [0/12] { 13, 0x0, 0x782, 0x0000a } [ 2.904000] Enabling PDC_PAT chassis codes support v0.05 [ 3.536000] Releasing cpu 1 now, hpa=fffffffffed25000 [ 3.548000] FP[1] enabled: Rev 1 Model 19 [ 3.552000] Releasing cpu 2 now, hpa=fffffffffed61000 [ 3.564000] FP[2] enabled: Rev 1 Model 19 [ 3.572000] Releasing cpu 3 now, hpa=fffffffffed65000 [ 3.584000] FP[3] enabled: Rev 1 Model 19 [ 3.584000] CPU(s): 4 x PA8700 (PCX-W2) at 875.000000 MHz [ 3.592000] Whole cache flush 822828 cycles, flushing 11038720 bytes 4910162 cycles [ 3.592000] Setting cache flush threshold to 180000 (4 CPUs online) [ 3.648000] SBA found Ike rev 2 at 0xfffffffffed00000 [ 3.660000] Elroy version TR4.0 (0x5) found at 0xffffffff9ffe0000 [ 3.680000] LBA: lmmio_space [0xffffffff80000000-0xffffffff81ffffff] - original [ 3.680000] LBA: lmmio_space [0xffffffff80000000-0xffffffff91ffffff] - new [ 3.700000] LBA 0:0: PCI host bridge to bus 0000:00 [ 3.700000] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 3.700000] pci_bus 0000:00: root bus resource [mem 0xffffffff80000000-0xffffffff91ffffff] (bus address [0x80000000-0x91ffffff]) [ 3.704000] pci_bus 0000:00: root bus resource [mem 0xfffffff004000000-0xfffffff07fffffff] [ 3.712000] pci_bus 0000:00: root bus resource [bus 00-07] [ 3.712000] pci 0000:00:00.0: [1011:0019] type 00 class 0x020000 [ 3.712000] pci 0000:00:00.0: reg 10: [io 0x0000-0x007f] [ 3.712000] pci 0000:00:00.0: reg 14: [mem 0xffffffff80100000-0xffffffff801003ff] [ 3.712000] pci 0000:00:00.0: reg 30: [mem 0xffffffff80180000-0xffffffff801bffff pref] [ 3.712000] pci 0000:00:01.0: [1000:000b] type 00 class 0x010000 [ 3.712000] pci 0000:00:01.0: reg 10: [io 0x0000-0x00ff] [ 3.712000] pci 0000:00:01.0: reg 14: [mem 0x00000000-0x000003ff 64bit] [ 3.712000] pci 0000:00:01.0: reg 1c: [mem 0x00000000-0x00001fff 64bit] [ 3.712000] pci 0000:00:01.0: supports D1 D2 [ 3.712000] pci 0000:00:01.1: [1000:000b] type 00 class 0x010000 [ 3.712000] pci 0000:00:01.1: reg 10: [io 0x0000-0x00ff] [ 3.712000] pci 0000:00:01.1: reg 14: [mem 0x00000000-0x000003ff 64bit] [ 3.712000] pci 0000:00:01.1: reg 1c: [mem 0x00000000-0x00001fff 64bit] [ 3.712000] pci 0000:00:01.1: supports D1 D2 [ 3.716000] pci 0000:00:02.0: [1000:000f] type 00 class 0x010000 [ 3.716000] pci 0000:00:02.0: reg 10: [io 0x0000-0x00ff] [ 3.716000] pci 0000:00:02.0: reg 14: [mem 0x00000000-0x000000ff] [ 3.716000] pci 0000:00:02.0: reg 18: [mem 0x00000000-0x00000fff] [ 3.716000] pci 0000:00:02.0: supports D1 D2 [ 3.716000] pci 0000:00:02.1: [1000:000f] type 00 class 0x010000 [ 3.716000] pci 0000:00:02.1: reg 10: [io 0x0000-0x00ff] [ 3.716000] pci 0000:00:02.1: reg 14: [mem 0x00000000-0x000000ff] [ 3.716000] pci 0000:00:02.1: reg 18: [mem 0x00000000-0x00000fff] [ 3.716000] pci 0000:00:02.1: supports D1 D2 [ 3.716000] pci 0000:00:04.0: [103c:128d] type 00 class 0x088000 [ 3.716000] pci 0000:00:04.1: [103c:1048] type 00 class 0x070002 [ 3.716000] pci 0000:00:04.1: reg 10: [mem 0xffffffff80000000-0xffffffff80000fff] [ 3.716000] pci 0000:00:04.1: reg 14: [io 0x0000-0x003f] [ 3.720000] iosapic: no IRTE for 0000:00:04.0 (IRQ not connected?) [ 3.724000] pci 0000:00:01.0: BAR 3: assigned [mem 0xffffffff80002000-0xffffffff80003fff 64bit] [ 3.724000] pci 0000:00:01.1: BAR 3: assigned [mem 0xffffffff80004000-0xffffffff80005fff 64bit] [ 3.728000] pci 0000:00:02.0: BAR 2: assigned [mem 0xffffffff80001000-0xffffffff80001fff] [ 3.728000] pci 0000:00:02.1: BAR 2: assigned [mem 0xffffffff80006000-0xffffffff80006fff] [ 3.728000] pci 0000:00:01.0: BAR 1: assigned [mem 0xffffffff80007000-0xffffffff800073ff 64bit] [ 3.732000] pci 0000:00:01.1: BAR 1: assigned [mem 0xffffffff80008000-0xffffffff800083ff 64bit] [ 3.736000] pci 0000:00:01.0: BAR 0: assigned [io 0x0100-0x01ff] [ 3.736000] pci 0000:00:01.1: BAR 0: assigned [io 0x0200-0x02ff] [ 3.736000] pci 0000:00:02.0: BAR 0: assigned [io 0x0300-0x03ff] [ 3.740000] pci 0000:00:02.0: BAR 1: assigned [mem 0xffffffff80009000-0xffffffff800090ff] [ 3.744000] pci 0000:00:02.1: BAR 0: assigned [io 0x0400-0x04ff] [ 3.744000] pci 0000:00:02.1: BAR 1: assigned [mem 0xffffffff8000a000-0xffffffff8000a0ff] [ 3.744000] pci 0000:00:00.0: BAR 0: assigned [io 0x0080-0x00ff] [ 3.748000] pci 0000:00:04.1: BAR 1: assigned [io 0x0040-0x007f] [ 3.748000] Elroy version TR4.0 (0x5) found at 0xffffffff9ffe2000 [ 3.752000] NOTICE: PCI bus reset still asserted! (clearing) [ 3.800000] NOTICE: Enabling PCI Arbitration [ 3.820000] LBA: lmmio_space [0xffffffff82000000-0xffffffff83ffffff] - original [ 3.820000] LBA: lmmio_space [0xffffffff82000000-0xffffffff7fffffff] - new [ 3.836000] LBA 0:1: PCI host bridge to bus 0000:08 [ 3.836000] pci_bus 0000:08: root bus resource [io 0x10000-0x1ffff] (bus address [0x0000-0xffff]) [ 3.896000] pci_bus 0000:08: root bus resource [mem 0xffffffff82000000-0xffffffff7fffffff] (bus address [0x82000000-0x7fffffff]) [ 4.176000] pci_bus 0000:08: root bus resource [mem 0xfffffff084000000-0xfffffff0ffffffff] [ 4.176000] pci_bus 0000:08: root bus resource [bus 08-0f] [ 4.316000] FAILED: lba_fixup_bus() request for lmmio_space [ffffffff82000000/ffffffff7fffffff] [ 4.460000] Elroy version TR4.0 (0x5) found at 0xffffffff9ffe4000 [ 4.460000] NOTICE: PCI bus reset still asserted! (clearing) [ 4.512000] NOTICE: Enabling PCI Arbitration [ 4.528000] LBA: lmmio_space [0xffffffff84000000-0xffffffff85ffffff] - original [ 4.596000] LBA: lmmio_space [0xffffffff84000000-0xffffffff7fffffff] - new [ 4.752000] LBA 0:2: PCI host bridge to bus 0000:10 [ 4.752000] pci_bus 0000:10: root bus resource [io 0x20000-0x2ffff] (bus address [0x0000-0xffff]) [ 4.876000] pci_bus 0000:10: root bus resource [mem 0xffffffff84000000-0xffffffff7fffffff] (bus address [0x84000000-0x7fffffff]) [ 5.016000] pci_bus 0000:10: root bus resource [mem 0xfffffff104000000-0xfffffff17fffffff] [ 5.156000] pci_bus 0000:10: root bus resource [bus 10-17] [ 5.296000] FAILED: lba_fixup_bus() request for lmmio_space [ffffffff84000000/ffffffff7fffffff] [ 5.436000] Elroy version TR4.0 (0x5) found at 0xffffffff9ffe6000 [ 5.436000] NOTICE: PCI bus reset still asserted! (clearing) [ 5.488000] NOTICE: Enabling PCI Arbitration [ 5.504000] LBA: lmmio_space [0xffffffff86000000-0xffffffff87ffffff] - original [ 5.576000] LBA: lmmio_space [0xffffffff86000000-0xffffffff7fffffff] - new [ 5.732000] LBA 0:3: PCI host bridge to bus 0000:18 [ 5.732000] pci_bus 0000:18: root bus resource [io 0x30000-0x3ffff] (bus address [0x0000-0xffff]) [ 5.856000] pci_bus 0000:18: root bus resource [mem 0xffffffff86000000-0xffffffff7fffffff] (bus address [0x86000000-0x7fffffff]) [ 5.996000] pci_bus 0000:18: root bus resource [mem 0xfffffff184000000-0xfffffff1ffffffff] [ 6.136000] pci_bus 0000:18: root bus resource [bus 18-1f] [ 6.272000] FAILED: lba_fixup_bus() request for lmmio_space [ffffffff86000000/ffffffff7fffffff] [ 6.416000] Elroy version TR4.0 (0x5) found at 0xffffffff9ffe8000 [ 6.436000] LBA: lmmio_space [0xffffffff88000000-0xffffffff89ffffff] - original [ 6.552000] LBA: lmmio_space [0xffffffff88000000-0xffffffff7fffffff] - new [ 6.708000] LBA 0:4: PCI host bridge to bus 0000:20 [ 6.708000] pci_bus 0000:20: root bus resource [io 0x40000-0x4ffff] (bus address [0x0000-0xffff]) [ 6.832000] pci_bus 0000:20: root bus resource [mem 0xffffffff88000000-0xffffffff7fffffff] (bus address [0x88000000-0x7fffffff]) [ 6.972000] pci_bus 0000:20: root bus resource [mem 0xfffffff204000000-0xfffffff27fffffff] [ 7.112000] pci_bus 0000:20: root bus resource [bus 20-27] [ 7.252000] FAILED: lba_fixup_bus() request for lmmio_space [ffffffff88000000/ffffffff7fffffff] [ 7.392000] Elroy version TR4.0 (0x5) found at 0xffffffff9ffea000 [ 7.392000] NOTICE: PCI bus reset still asserted! (clearing) [ 7.444000] NOTICE: Enabling PCI Arbitration [ 7.464000] LBA: lmmio_space [0xffffffff8a000000-0xffffffff8bffffff] - original [ 7.532000] LBA: lmmio_space [0xffffffff8a000000-0xffffffff7fffffff] - new [ 7.688000] LBA 0:5: PCI host bridge to bus 0000:28 [ 7.688000] pci_bus 0000:28: root bus resource [io 0x50000-0x5ffff] (bus address [0x0000-0xffff]) [ 7.812000] pci_bus 0000:28: root bus resource [mem 0xffffffff8a000000-0xffffffff7fffffff] (bus address [0x8a000000-0x7fffffff]) [ 7.948000] pci_bus 0000:28: root bus resource [mem 0xfffffff284000000-0xfffffff2ffffffff] [ 8.092000] pci_bus 0000:28: root bus resource [bus 28-2f] [ 8.228000] FAILED: lba_fixup_bus() request for lmmio_space [ffffffff8a000000/ffffffff7fffffff] [ 8.372000] Elroy version TR4.0 (0x5) found at 0xffffffff9fff0000 [ 8.372000] NOTICE: PCI bus reset still asserted! (clearing) [ 8.420000] NOTICE: Enabling PCI Arbitration [ 8.440000] LBA: lmmio_space [0xffffffff90000000-0xffffffff91ffffff] - original [ 8.508000] LBA: lmmio_space [0xffffffff90000000-0xffffffff7fffffff] - new [ 8.664000] LBA 0:8: PCI host bridge to bus 0000:40 [ 8.664000] pci_bus 0000:40: root bus resource [io 0x60000-0x6ffff] (bus address [0x0000-0xffff]) [ 8.788000] pci_bus 0000:40: root bus resource [mem 0xffffffff90000000-0xffffffff7fffffff] (bus address [0x90000000-0x7fffffff]) [ 8.928000] pci_bus 0000:40: root bus resource [mem 0xfffffff404000000-0xfffffff47fffffff] [ 9.068000] pci_bus 0000:40: root bus resource [bus 40-47] [ 9.208000] FAILED: lba_fixup_bus() request for lmmio_space [ffffffff90000000/ffffffff7fffffff] [ 9.208000] Elroy version TR4.0 (0x5) found at 0xffffffff9fff2000 [ 9.348000] NOTICE: PCI bus reset still asserted! (clearing) [ 9.400000] NOTICE: Enabling PCI Arbitration [ 9.416000] LBA: lmmio_space [0xffffffff92000000-0xffffffff93ffffff] - original [ 9.488000] LBA: lmmio_space [0xffffffff92000000-0xffffffff9ffdffff] - new [ 9.644000] LBA 0:9: PCI host bridge to bus 0000:48 [ 9.644000] pci_bus 0000:48: root bus resource [io 0x70000-0x7ffff] (bus address [0x0000-0xffff]) [ 9.768000] pci_bus 0000:48: root bus resource [mem 0xffffffff92000000-0xffffffff9ffdffff] (bus address [0x92000000-0x9ffdffff]) [ 9.904000] pci_bus 0000:48: root bus resource [mem 0xfffffff484000000-0xfffffff4ffffffff] [ 10.044000] pci_bus 0000:48: root bus resource [bus 48-4f] [ 10.184000] Elroy version TR4.0 (0x5) found at 0xffffffff9fff4000 [ 10.208000] LBA: lmmio_space [0xffffffff94000000-0xffffffff95ffffff] - original [ 10.324000] LBA: lmmio_space [0xffffffff94000000-0xffffffff91ffffff] - new [ 10.480000] LBA 0:10: PCI host bridge to bus 0000:50 [ 10.480000] pci_bus 0000:50: root bus resource [io 0x80000-0x8ffff] (bus address [0x0000-0xffff]) [ 10.604000] pci_bus 0000:50: root bus resource [mem 0xffffffff94000000-0xffffffff91ffffff] (bus address [0x94000000-0x91ffffff]) [ 10.744000] pci_bus 0000:50: root bus resource [mem 0xfffffff504000000-0xfffffff57fffffff] [ 10.880000] pci_bus 0000:50: root bus resource [bus 50-57] [ 11.020000] pci 0000:50:00.0: [8086:0964] type 01 class 0x060400 [ 11.024000] pci 0000:50:00.1: [8086:1960] type 00 class 0x0e0001 [ 11.024000] pci 0000:50:00.1: reg 10: [mem 0x00000000-0x003fffff pref] [ 11.024000] pci 0000:50:00.1: reg 30: [mem 0x00000000-0x00007fff pref] [ 11.024000] FAILED: lba_fixup_bus() request for lmmio_space [ffffffff94000000/ffffffff91ffffff] [ 11.024000] pci_bus 0000:51: busn_res: can not insert [bus 51-ff] under [bus 50-57] (conflicts with (null) [bus 50-57]) [ 11.024000] pci 0000:50:00.0: PCI bridge to [bus 51-ff] [ 11.160000] pci 0000:50:00.0: bridge window [io 0x80000-0x80fff] [ 11.160000] pci 0000:50:00.0: bridge window [mem 0x00000000-0x000fffff] [ 11.160000] pci 0000:50:00.0: bridge window [mem 0x00000000-0x000fffff pref] [ 11.160000] pci 0000:50:00.0: address space collision: [mem 0x00000000-0x000fffff] conflicts with PCI50 LMMIO [mem 0xffffffff94000000-0xffffffff91ffffff] [ 11.300000] pci 0000:50:00.0: address space collision: [mem 0x00000000-0x000fffff pref] conflicts with PCI50 LMMIO [mem 0xffffffff94000000-0xffffffff91ffffff] [ 11.580000] pci 0000:50:00.0: no compatible bridge window for [??? 0x00000000 flags 0x0] [ 11.720000] pci_bus 0000:51: busn_res: [bus 51-ff] end is updated to 51 [ 11.720000] pci 0000:50:00.1: BAR 0: assigned [mem 0xfffffff504000000-0xfffffff5043fffff pref] [ 11.860000] pci 0000:50:00.0: BAR 14: assigned [mem 0xfffffff504400000-0xfffffff5044fffff] [ 11.860000] pci 0000:50:00.0: BAR 15: assigned [mem 0xfffffff504500000-0xfffffff5045fffff pref] [ 12.000000] pci 0000:50:00.1: BAR 6: assigned [mem 0xfffffff504600000-0xfffffff504607fff pref] [ 12.140000] pci 0000:50:00.0: PCI bridge to [bus 51] [ 12.280000] pci 0000:50:00.0: bridge window [io 0x80000-0x80fff] [ 12.280000] pci 0000:50:00.0: bridge window [mem 0xfffffff504400000-0xfffffff5044fffff] [ 12.420000] pci 0000:50:00.0: bridge window [mem 0xfffffff504500000-0xfffffff5045fffff pref] [ 12.556000] pci 0000:50:00.0: enabling device (0000 -> 0003) [ 12.696000] pci 0000:50:00.0: enabling SERR and PARITY (0003 -> 0143) [ 12.700000] Elroy version TR4.0 (0x5) found at 0xffffffff9fff8000 [ 12.856000] LBA: lmmio_space [0xffffffff98000000-0xffffffff99ffffff] - original [ 12.976000] LBA: lmmio_space [0xffffffff98000000-0xffffffff91ffffff] - new [ 12.992000] LBA 0:12: PCI host bridge to bus 0000:60 [ 13.116000] pci_bus 0000:60: root bus resource [io 0x90000-0x9ffff] (bus address [0x0000-0xffff]) [ 13.256000] pci_bus 0000:60: root bus resource [mem 0xffffffff98000000-0xffffffff91ffffff] (bus address [0x98000000-0x91ffffff]) [ 13.396000] pci_bus 0000:60: root bus resource [mem 0xfffffff604000000-0xfffffff67fffffff] [ 13.536000] pci_bus 0000:60: root bus resource [bus 60-67] [ 13.536000] pci 0000:60:00.0: [1011:0019] type 00 class 0x020000 [ 13.536000] pci 0000:60:00.0: reg 10: [io 0xb7eff800-0xb7eff87f] [ 13.536000] pci 0000:60:00.0: reg 14: [mem 0xbf7d7800-0xbf7d7bff] [ 13.536000] pci 0000:60:00.0: reg 30: [mem 0xd9ec0000-0xd9efffff pref] [ 13.536000] FAILED: lba_fixup_bus() request for lmmio_space [ffffffff98000000/ffffffff91ffffff] [ 13.676000] pci 0000:60:00.0: no compatible bridge window for [io 0xb7eff800-0xb7eff87f] [ 13.816000] pci 0000:60:00.0: no compatible bridge window for [mem 0xbf7d7800-0xbf7d7bff] [ 13.956000] pci 0000:60:00.0: no compatible bridge window for [mem 0xd9ec0000-0xd9efffff pref] [ 14.096000] pci 0000:60:00.0: BAR 6: assigned [mem 0xfffffff604000000-0xfffffff60403ffff pref] [ 14.236000] pci 0000:60:00.0: BAR 1: assigned [mem 0xfffffff604040000-0xfffffff6040403ff] [ 14.236000] pci 0000:60:00.0: BAR 0: assigned [io 0x90000-0x9007f] [ 14.376000] powersw: Soft power switch support not available. [ 14.520000] bio: create slab at 0 [ 14.520000] vgaarb: loaded [ 14.520000] SCSI subsystem initialized [ 14.652000] libata version 3.00 loaded. [ 14.660000] NET: Registered protocol family 2 [ 14.664000] TCP established hash table entries: 32768 (order: 7, 524288 bytes) [ 14.796000] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 14.936000] TCP: Hash tables configured (established 32768 bind 32768) [ 14.936000] TCP: reno registered [ 15.072000] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 15.072000] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 15.212000] NET: Registered protocol family 1 [ 15.212000] RPC: Registered named UNIX socket transport module. [ 15.352000] RPC: Registered udp transport module. [ 15.352000] RPC: Registered tcp transport module. [ 15.488000] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 15.488000] PCI: CLS 64 bytes [ 15.492000] Chassis warnings not supported. [ 15.628000] Performance monitoring counters enabled for Marcato W+? (rp5470) [ 15.780000] VFS: Disk quotas dquot_6.5.2 [ 15.780000] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 15.912000] fuse init (API version 7.22) [ 15.912000] msgmni has been set to 8029 [ 15.916000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 16.048000] io scheduler noop registered [ 16.188000] io scheduler cfq registered (default) [ 16.188000] PDC Stable Storage facility v0.30 [ 16.760000] STI GSC/PCI core graphics driver Version 0.9a [ 16.760000] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 16.764000] serial 0000:00:04.1: enabling device (0142 -> 0143) [ 16.788000] 0000:00:04.1: ttyS0 at MMIO 0xffffffff80000000 (irq = 70) is a 16550A [ 16.788000] console [ttyS0] enabled, bootconsole disabled [ 16.788000] 0000:00:04.1: ttyS1 at MMIO 0xffffffff80000008 (irq = 70) is a 16450 [ 16.828000] 0000:00:04.1: ttyS2 at MMIO 0xffffffff80000010 (irq = 70) is a 16550A [ 16.968000] 0000:00:04.1: ttyS3 at MMIO 0xffffffff80000030 (irq = 70) is a 16550A [ 17.096000] Couldn't register serial port 0000:00:04.1: -28 [ 17.100000] loop: module loaded [ 17.100000] Uniform Multi-Platform E-IDE driver [ 17.244000] Loading iSCSI transport class v2.0-870. [ 17.244000] iscsi: registered transport (qla4xxx) [ 17.392000] QLogic iSCSI HBA Driver [ 17.392000] sym53c8xx 0000:00:01.0: enabling device (0000 -> 0003) [ 17.540000] sym53c8xx 0000:00:01.0: enabling SERR and PARITY (0003 -> 0143) [ 17.600000] sym0: <896> rev 0x7 at pci 0000:00:01.0 irq 67 [ 17.696000] sym0: PA-RISC Firmware, ID 7, Fast-40, LVD, parity checking [ 17.696000] sym0: SCSI BUS has been reset. [ 17.836000] scsi0 : sym-2.2.3 [ 25.108000] sym53c8xx 0000:00:01.1: enabling device (0000 -> 0003) [ 25.108000] sym53c8xx 0000:00:01.1: enabling SERR and PARITY (0003 -> 0143) [ 25.168000] sym1: <896> rev 0x7 at pci 0000:00:01.1 irq 68 [ 25.172000] sym1: PA-RISC Firmware, ID 7, Fast-40, SE, parity checking [ 25.172000] sym1: SCSI BUS has been reset. [ 25.180000] sym1: SCSI BUS mode change from SE to SE. [ 25.180000] sym1: SCSI BUS has been reset. [ 25.184000] scsi1 : sym-2.2.3 [ 29.272000] scsi 1:0:2:0: Direct-Access HP 36.4G ST373455LC#36 HPC8 PQ: 0 ANSI: 3 [ 29.272000] scsi target1:0:2: tagged command queuing enabled, command queue depth 16. [ 29.272000] scsi target1:0:2: Beginning Domain Validation [ 29.280000] scsi target1:0:2: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 31) [ 29.280000] scsi target1:0:2: Domain Validation skipping write tests [ 29.280000] scsi target1:0:2: Ending Domain Validation [ 32.808000] sym53c8xx 0000:00:02.0: enabling device (0000 -> 0003) [ 32.808000] sym53c8xx 0000:00:02.0: enabling SERR and PARITY (0003 -> 0143) [ 32.868000] sym2: <875> rev 0x37 at pci 0000:00:02.0 irq 68 [ 32.956000] sym2: PA-RISC Firmware, ID 7, Fast-20, SE, parity checking [ 32.956000] sym2: SCSI BUS has been reset. [ 32.964000] scsi2 : sym-2.2.3 [ 36.540000] scsi 2:0:2:0: Direct-Access HP 36.4G ST373455LC#36 HPC8 PQ: 0 ANSI: 3 [ 36.540000] scsi target2:0:2: tagged command queuing enabled, command queue depth 16. [ 36.540000] scsi target2:0:2: Beginning Domain Validation [ 36.548000] scsi target2:0:2: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 15) [ 36.548000] scsi target2:0:2: Domain Validation skipping write tests [ 36.548000] scsi target2:0:2: Ending Domain Validation [ 40.076000] sym53c8xx 0000:00:02.1: enabling device (0000 -> 0003) [ 40.076000] sym53c8xx 0000:00:02.1: enabling SERR and PARITY (0003 -> 0143) [ 40.140000] sym3: <875> rev 0x37 at pci 0000:00:02.1 irq 69 [ 40.228000] sym3: PA-RISC Firmware, ID 7, Fast-20, SE, parity checking [ 40.228000] sym3: SCSI BUS has been reset. [ 40.232000] scsi3 : sym-2.2.3 [ 43.812000] scsi 3:0:2:0: CD-ROM HP DVD-ROM 305 1.01 PQ: 0 ANSI: 2 [ 43.812000] scsi target3:0:2: Beginning Domain Validation [ 43.816000] scsi target3:0:2: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 16) [ 43.820000] scsi target3:0:2: Domain Validation skipping write tests [ 43.820000] scsi target3:0:2: Ending Domain Validation [ 47.348000] tun: Universal TUN/TAP device driver, 1.6 [ 47.348000] tun: (C) 1999-2004 Max Krasnyansky [ 47.348000] Linux Tulip driver version 1.1.15 (Feb 27, 2007) [ 47.348000] sd 1:0:2:0: [sda] 71132960 512-byte logical blocks: (36.4 GB/33.9 GiB) [ 47.348000] sd 2:0:2:0: [sdb] 71132960 512-byte logical blocks: (36.4 GB/33.9 GiB) [ 47.352000] sd 2:0:2:0: [sdb] Write Protect is off [ 47.352000] sd 2:0:2:0: [sdb] Mode Sense: d3 00 10 08 [ 47.352000] sd 2:0:2:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 47.360000] sd 1:0:2:0: [sda] Write Protect is off [ 47.360000] sd 1:0:2:0: [sda] Mode Sense: d3 00 10 08 [ 47.364000] tulip0: no phy info, aborting mtable build [ 47.368000] tulip0: MII transceiver #1 config 1000 status 782d advertising 01e1 [ 47.416000] sdb: unknown partition table [ 47.416000] sd 1:0:2:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 47.428000] sd 2:0:2:0: [sdb] Attached SCSI disk [ 47.432000] net eth0: Digital DS21142/43 Tulip rev 65 at Port 0x80, 00:30:6e:48:46:c6, IRQ 66 [ 47.432000] tulip 0000:60:00.0: enabling device (0000 -> 0003) [ 47.432000] tulip 0000:60:00.0: enabling SERR and PARITY (0003 -> 0143) [ 47.448000] tulip1: EEPROM default media type Autosense [ 47.448000] tulip1: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block [ 47.448000] tulip1: MII transceiver #1 config 3100 status 7849 advertising 0101 [ 47.448000] tulip1: Advertising 01e1 on PHY 1, previously advertising 0101 [ 47.464000] net eth1: Digital DS21142/43 Tulip rev 65 at Port 0x90000, 00:30:6e:4a:66:53, IRQ 72 [ 47.464000] LASI 82596 driver - Revision: 1.30 [ 47.464000] mousedev: PS/2 mouse device common for all mice [ 47.468000] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0 [ 47.468000] Netfilter messages via NETLINK v0.30. [ 47.468000] TCP: cubic registered [ 47.468000] NET: Registered protocol family 17 [ 47.468000] NET: Registered protocol family 33 [ 47.468000] Key type rxrpc registered [ 47.468000] Key type rxrpc_s registered [ 47.468000] registered taskstats version 1 [ 47.472000] rtc-generic rtc-generic: setting system clock to 2013-06-19 19:09:14 UTC (1371668954) [ 47.496000] Sending BOOTP requests . OK [ 49.200000] timer_interrupt(CPU 3): delayed! cycles 5CD237C4 rem 3589C next/now 220DD6F24A/220DD399AE [ 49.348000] [sched_delayed] sched: RT throttling activated [ 49.372000] sda: sda1 sda2 sda3 < sda5 sda6 > [ 49.364000] IP-Config: Got BOOTP answer from 10.20.89.89, my address is 10.20.88.66 [ 49.500000] IP-Config: Complete: [ 49.504000] sd 1:0:2:0: [sda] Attached SCSI disk [ 49.648000] device=eth0, hwaddr=00:30:6e:48:46:c6, ipaddr=10.20.88.66, mask=255.255.252.0, gw=10.20.88.1 [ 49.796000] host=10.20.88.66, domain=wdf.sap.corp, nis-domain=(none) [ 49.948000] bootserver=10.20.89.89, rootserver=10.20.89.89, rootpath= [ 49.948000] nameserver0=10.17.122.10, nameserver1=10.17.121.30 [ 50.140000] kjournald starting. Commit interval 5 seconds [ 50.248000] EXT3-fs (sda5): mounted filesystem with ordered data mode [ 50.312000] VFS: Mounted root (ext3 filesystem) readonly on device 8:5. [ 50.312000] Freeing unused kernel memory: 364K (40b2c000 - 40b87000) [ 50.480000] net eth0: Setting full-duplex based on MII#1 link partner capability of c1e1 [ 63.096000] Adding 1349424k swap on /dev/sda6. Priority:-1 extents:1 across:1349424k [ 63.788000] EXT3-fs (sda5): using internal journal