[    0.000000] Linux version 5.9.0-2-parisc64 (debian-kernel@lists.debian.org) (hppa64-linux-gnu-gcc-10 (GCC) 10.2.0, GNU ld (GNU Binutils for Debian) 2.35.1) #1 SMP Debian 5.9.6-1 (2020-11-08)
[    0.000000] CPU0: thread -1, cpu 0, socket 0
[    0.000000] FP[0] enabled: Rev 1 Model 19
[    0.000000] The 64-bit Kernel has started...
[    0.000000] Kernel default page size is 4 KB. Huge pages enabled with 1 MB physical and 2 MB virtual size.
[    0.000000] printk: bootconsole [ttyB0] enabled
[    0.000000] Initialized PDC Console for debugging.
[    0.000000] Determining PDC firmware type: 64 bit PAT.
[    0.000000] PAT: Running on cell 0 and location 1.
[    0.000000] PAT: legacy revision 0x24, pat_rev 0x201, pdc_cap 0x132, S-PTLB 0, HPMC_RENDEZ 0.
[    0.000000] model 00005df0 00000491 00000000 00000002 462e613f 100000f1 00000008 000000b2 000000b2
[    0.000000] vers  00000301
[    0.000000] CPUID vers 19 rev 11 (0x0000026b)
[    0.000000] capabilities 0x5
[    0.000000] model 9000/800/L3000-8x
[    0.000000] product A6144B, original product A6144B, S/N: DEH4317HCJ
[    0.000000] Memory Ranges:
[    0.000000]  0) Start 0x0000000000000000 End 0x000000007fffffff Size   2048 MB
[    0.000000]  1) Start 0x0000000180000000 End 0x00000001ffffffff Size   2048 MB
[    0.000000] Total Memory: 4096 MB
[    0.000000] initrd: 7dae0000-7ffedb26
[    0.000000] initrd: reserving 3dae0000-3ffedb26 (mem_max 100000000)
[    0.000000] PDT: type PDT_PAT_CELL, size 256, entries 0, status 0, dbe_loc 0xffffffffffffffff, good_mem 13 MB
[    0.000000] PDT: Firmware reports all memory OK.
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x00001fffffffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000007fffffff]
[    0.000000]   node   0: [mem 0x0000000180000000-0x00000001ffffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff]
[    0.000000] On node 0 totalpages: 1048576
[    0.000000]   Normal zone: 16384 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 1048576 pages, LIFO batch:63
[    0.000000] percpu: Embedded 37 pages/cpu s112000 r8192 d31360 u151552
[    0.000000] pcpu-alloc: s112000 r8192 d31360 u151552 alloc=37*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 
[    0.000000] SMP: bootstrap CPU ID is 0
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1032192
[    0.000000] Kernel command line: root=UUID=85f716b5-78b2-4a68-8f53-fe6df8e84b2c HOME=/ cryptomgr.notests console=ttyS0 TERM=vt102 palo_kernel=2/vmlinux
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.000000] Memory: 2087732K/4194304K available (12892K kernel code, 4671K rwdata, 1655K rodata, 1024K init, 844K bss, 140492K reserved, 0K cma-reserved)
[    0.000000] random: get_random_u64 called from __kmem_cache_create+0x88/0x878 with crng_init=0
[    0.000000] SLUB: HWalign=16, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] ftrace: allocating 25201 entries in 99 pages
[    0.000000] ftrace: allocated 99 pages with 4 groups
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] 	Rude variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] NR_IRQS: 128
[    0.000013] sched_clock: 64 bits at 875MHz, resolution 1ns, wraps every 4398046511103ns
[    0.000923] Console: colour dummy device 160x64
[    0.001193] Calibrating delay loop... 1737.72 BogoMIPS (lpj=3475456)
[    0.045360] pid_max: default: 32768 minimum: 301
[    0.089618] LSM: Security Framework initializing
[    0.089886] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.229774] AppArmor: AppArmor initialized
[    0.229922] TOMOYO Linux initialized
[    0.369495] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.369913] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.515934] rcu: Hierarchical SRCU implementation.
[    0.651408] smp: Bringing up secondary CPUs ...
[    0.651570] smp: Brought up 1 node, 1 CPU
[    0.940540] node 0 deferred pages initialised in 288ms
[    0.943818] devtmpfs: initialized
[    0.947739] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.948239] futex hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    1.038456] NET: Registered protocol family 16
[    1.173517] audit: initializing netlink subsys (disabled)
[    1.175516] thermal_sys: Registered thermal governor 'fair_share'
[    1.175523] thermal_sys: Registered thermal governor 'step_wise'
[    1.313220] audit: type=2000 audit(1605617210.942:1): state=initialized audit_enabled=0 res=1
[    1.453159] EISA bus registered
[    1.589181] Searching for devices...
[    2.045152] Found devices:
[    2.045262] 1. Marcato W+ (rp5470)? at 0xfffffffffed21000 [33] { 0, 0x0, 0x5df, 0x00000 }
[    2.045721] 2. Marcato W+ (rp5470)? at 0xfffffffffed25000 [37] { 0, 0x0, 0x5df, 0x00000 }
[    2.045996] 3. Marcato W+ (rp5470)? at 0xfffffffffed61000 [97] { 0, 0x0, 0x5df, 0x00000 }
[    2.053157] 4. Marcato W+ (rp5470)? at 0xfffffffffed65000 [101] { 0, 0x0, 0x5df, 0x00000 }
[    2.061156] 5. DEW BC Runway Port at 0xfffffffffed20000 [32] { 7, 0x0, 0x584, 0x0000c }
[    2.173156] 6. DEW BC Runway Port at 0xfffffffffed24000 [36] { 7, 0x0, 0x584, 0x0000c }
[    2.313156] 7. DEW BC Runway Port at 0xfffffffffed60000 [96] { 7, 0x0, 0x584, 0x0000c }
[    2.453156] 8. DEW BC Runway Port at 0xfffffffffed64000 [100] { 7, 0x0, 0x584, 0x0000c }
[    2.453430] 9. Memory at 0xfffffffffedc0000 [192] { 1, 0x0, 0x090, 0x00009 }
[    2.593170] 10. IKE I/O BC Merced Port at 0xfffffffffed00000 [0] { 7, 0x0, 0x803, 0x0000c }
[    2.733158] 11. Elroy PCI Bridge at 0xffffffff9ffe0000 [0/0] { 13, 0x0, 0x782, 0x0000a }
[    2.873164] 12. Elroy PCI Bridge at 0xffffffff9ffe2000 [0/1] { 13, 0x0, 0x782, 0x0000a }
[    3.013157] 13. Elroy PCI Bridge at 0xffffffff9ffe4000 [0/2] { 13, 0x0, 0x782, 0x0000a }
[    3.013431] 14. Elroy PCI Bridge at 0xffffffff9ffe6000 [0/3] { 13, 0x0, 0x782, 0x0000a }
[    3.153158] 15. Elroy PCI Bridge at 0xffffffff9ffe8000 [0/4] { 13, 0x0, 0x782, 0x0000a }
[    3.289158] 16. Elroy PCI Bridge at 0xffffffff9ffea000 [0/5] { 13, 0x0, 0x782, 0x0000a }
[  188.041156] 17. Elroy PCI Bridge at 0xffffffff9fff0000 [0/8] { 13, 0x0, 0x782, 0x0000a }
[  188.045158] 18. Elroy PCI Bridge at 0xffffffff9fff2000 [0/9] { 13, 0x0, 0x782, 0x0000a }
[  188.047247] 19. Elroy PCI Bridge at 0xffffffff9fff4000 [0/10] { 13, 0x0, 0x782, 0x0000a }
[  188.047525] 20. Elroy PCI Bridge at 0xffffffff9fff8000 [0/12] { 13, 0x0, 0x782, 0x0000a }
[  188.049161] Merced bus found: Enable PxTLB serialization.
[  188.053155] Enabling PDC_PAT chassis codes support v0.05
[  188.545184] Logical CPU #0 is physical cpu #0 at location 0x0 with hpa 0xfffffffffed21000
[  188.550643] Logical CPU #1 is physical cpu #1 at location 0x0 with hpa 0xfffffffffed25000
[  188.550910] CPU1: thread -1, cpu 0, socket 1
[  188.553989] Releasing cpu 1 now, hpa=fffffffffed25000
[  188.570853] Logical CPU #2 is physical cpu #2 at location 0x0 with hpa 0xfffffffffed61000
[  188.571107] CPU2: thread -1, cpu 0, socket 2
[  188.575231] Releasing cpu 2 now, hpa=fffffffffed61000
[  188.594879] Logical CPU #3 is physical cpu #3 at location 0x0 with hpa 0xfffffffffed65000
[  188.595136] CPU3: thread -1, cpu 0, socket 3
[  188.597578] Releasing cpu 3 now, hpa=fffffffffed65000
[  188.610258] CPU(s): 4 out of 4 PA8700 (PCX-W2) at 875.000000 MHz online
[  188.611023] alternatives: applied 65 out of 245 patches
[  188.627086] Whole cache flush 477329 cycles, flushing 20971520 bytes 9962814 cycles
[  188.627109] Cache flush threshold set to 981 KiB
[  188.627296] TLB flush threshold set to 240 KiB
[  188.685363] SBA found Ike rev 2 at 0xfffffffffed00000
[  188.709718] random: fast init done
[  188.721727] Elroy version TR4.0 (0x5) found at 0xffffffff9ffe0000
[  188.757775] LBA 0:0: PCI host bridge to bus 0000:00
[  188.757991] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[  188.758337] pci_bus 0000:00: root bus resource [mem 0xffffffff80000000-0xffffffff81ffffff] (bus address [0x80000000-0x81ffffff])
[  188.760570] pci_bus 0000:00: root bus resource [bus 00-07]
[  188.760903] pci 0000:00:00.0: [1011:0019] type 00 class 0x020000
[  188.761294] pci 0000:00:00.0: reg 0x10: [io  0x0000-0x007f]
[  188.765215] pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x000003ff]
[  188.765692] pci 0000:00:00.0: reg 0x30: [mem 0xffffffff80080000-0xffffffff800bffff pref]
[  188.769733] pci 0000:00:01.0: [1000:000b] type 00 class 0x010000
[  188.771221] pci 0000:00:01.0: reg 0x10: [io  0x0000-0x00ff]
[  188.771508] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x000003ff 64bit]
[  188.773252] pci 0000:00:01.0: reg 0x1c: [mem 0x00000000-0x00001fff 64bit]
[  188.775534] pci 0000:00:01.0: supports D1 D2
[  188.776211] pci 0000:00:01.1: [1000:000b] type 00 class 0x010000
[  188.777291] pci 0000:00:01.1: reg 0x10: [io  0x0000-0x00ff]
[  188.777594] pci 0000:00:01.1: reg 0x14: [mem 0xffffffff80100000-0xffffffff801003ff 64bit]
[  188.779496] pci 0000:00:01.1: reg 0x1c: [mem 0xffffffff80180000-0xffffffff80181fff 64bit]
[  188.781541] pci 0000:00:01.1: supports D1 D2
[  188.782298] pci 0000:00:02.0: [1000:000f] type 00 class 0x010000
[  188.783439] pci 0000:00:02.0: reg 0x10: [io  0x0000-0x00ff]
[  188.783686] pci 0000:00:02.0: reg 0x14: [mem 0x00000000-0x000000ff]
[  188.785213] pci 0000:00:02.0: reg 0x18: [mem 0x00000000-0x00000fff]
[  188.787612] pci 0000:00:02.0: supports D1 D2
[  188.789598] pci 0000:00:02.1: [1000:000f] type 00 class 0x010000
[  188.790717] pci 0000:00:02.1: reg 0x10: [io  0x0000-0x00ff]
[  188.790964] pci 0000:00:02.1: reg 0x14: [mem 0x00000000-0x000000ff]
[  188.792856] pci 0000:00:02.1: reg 0x18: [mem 0x00000000-0x00000fff]
[  188.793613] pci 0000:00:02.1: supports D1 D2
[  188.794474] pci 0000:00:04.0: [103c:128d] type 00 class 0x088000
[  188.798195] pci 0000:00:04.1: [103c:1048] type 00 class 0x070002
[  188.798525] pci 0000:00:04.1: reg 0x10: [mem 0xffffffff80000000-0xffffffff80000fff]
[  188.801291] pci 0000:00:04.1: reg 0x14: [io  0x0000-0x003f]
[  188.806346] iosapic: no IRTE for 0000:00:04.0 (IRQ not connected?)
[  188.806631] pci 0000:00:01.0: BAR 3: assigned [mem 0xffffffff80002000-0xffffffff80003fff 64bit]
[  188.807130] pci 0000:00:02.0: BAR 2: assigned [mem 0xffffffff80001000-0xffffffff80001fff]
[  188.809184] pci 0000:00:02.1: BAR 2: assigned [mem 0xffffffff80004000-0xffffffff80004fff]
[  188.811249] pci 0000:00:00.0: BAR 1: assigned [mem 0xffffffff80005000-0xffffffff800053ff]
[  188.813182] pci 0000:00:01.0: BAR 1: assigned [mem 0xffffffff80006000-0xffffffff800063ff 64bit]
[  188.813545] pci 0000:00:01.0: BAR 0: assigned [io  0x0100-0x01ff]
[  188.815602] pci 0000:00:01.1: BAR 0: assigned [io  0x0200-0x02ff]
[  188.817182] pci 0000:00:02.0: BAR 0: assigned [io  0x0300-0x03ff]
[  188.817420] pci 0000:00:02.0: BAR 1: assigned [mem 0xffffffff80007000-0xffffffff800070ff]
[  188.821179] pci 0000:00:02.1: BAR 0: assigned [io  0x0400-0x04ff]
[  188.823204] pci 0000:00:02.1: BAR 1: assigned [mem 0xffffffff80008000-0xffffffff800080ff]
[  188.825183] pci 0000:00:00.0: BAR 0: assigned [io  0x0080-0x00ff]
[  188.825416] pci 0000:00:04.1: BAR 1: assigned [io  0x0040-0x007f]
[  188.828575] Elroy version TR4.0 (0x5) found at 0xffffffff9ffe2000
[  188.830210] NOTICE: PCI bus reset still asserted! (clearing)
[  188.880414] NOTICE: Enabling PCI Arbitration
[  188.914034] LBA 0:1: PCI host bridge to bus 0000:08
[  188.914262] pci_bus 0000:08: root bus resource [io  0x10000-0x1ffff] (bus address [0x0000-0xffff])
[  188.914724] pci_bus 0000:08: root bus resource [mem 0xffffffff82000000-0xffffffff83ffffff] (bus address [0x82000000-0x83ffffff])
[  188.917170] pci_bus 0000:08: root bus resource [bus 08-0f]
[  188.920757] Elroy version TR4.0 (0x5) found at 0xffffffff9ffe4000
[  188.922202] NOTICE: PCI bus reset still asserted! (clearing)
[  188.972390] NOTICE: Enabling PCI Arbitration
[  189.008547] LBA 0:2: PCI host bridge to bus 0000:10
[  189.008786] pci_bus 0000:10: root bus resource [io  0x20000-0x2ffff] (bus address [0x0000-0xffff])
[  189.009218] pci_bus 0000:10: root bus resource [mem 0xffffffff84000000-0xffffffff85ffffff] (bus address [0x84000000-0x85ffffff])
[  189.013169] pci_bus 0000:10: root bus resource [bus 10-17]
[  189.021716] Elroy version TR4.0 (0x5) found at 0xffffffff9ffe6000
[  189.022995] NOTICE: PCI bus reset still asserted! (clearing)
[  189.073033] NOTICE: Enabling PCI Arbitration
[  189.108848] LBA 0:3: PCI host bridge to bus 0000:18
[  189.109082] pci_bus 0000:18: root bus resource [io  0x30000-0x3ffff] (bus address [0x0000-0xffff])
[  196.013496] pci_bus 0000:18: root bus resource [mem 0xffffffff86000000-0xffffffff87ffffff] (bus address [0x86000000-0x87ffffff])
[  196.015436] pci_bus 0000:18: root bus resource [bus 18-1f]
[  196.018750] Elroy version TR4.0 (0x5) found at 0xffffffff9ffe8000
[  196.058202] LBA 0:4: PCI host bridge to bus 0000:20
[  196.058452] pci_bus 0000:20: root bus resource [io  0x40000-0x4ffff] (bus address [0x0000-0xffff])
[  196.059152] pci_bus 0000:20: root bus resource [mem 0xffffffff88000000-0xffffffff89ffffff] (bus address [0x88000000-0x89ffffff])
[  196.061222] pci_bus 0000:20: root bus resource [bus 20-27]
[  196.066749] Elroy version TR4.0 (0x5) found at 0xffffffff9ffea000
[  196.069278] NOTICE: PCI bus reset still asserted! (clearing)
[  196.119735] NOTICE: Enabling PCI Arbitration
[  196.155859] LBA 0:5: PCI host bridge to bus 0000:28
[  196.156097] pci_bus 0000:28: root bus resource [io  0x50000-0x5ffff] (bus address [0x0000-0xffff])
[  196.156642] pci_bus 0000:28: root bus resource [mem 0xffffffff8a000000-0xffffffff8bffffff] (bus address [0x8a000000-0x8bffffff])
[  196.157220] pci_bus 0000:28: root bus resource [bus 28-2f]
[  196.162617] Elroy version TR4.0 (0x5) found at 0xffffffff9fff0000
[  196.163891] NOTICE: PCI bus reset still asserted! (clearing)
[  196.213937] NOTICE: Enabling PCI Arbitration
[  196.250261] LBA 0:8: PCI host bridge to bus 0000:40
[  196.250500] pci_bus 0000:40: root bus resource [io  0x60000-0x6ffff] (bus address [0x0000-0xffff])
[  196.251072] pci_bus 0000:40: root bus resource [mem 0xffffffff90000000-0xffffffff91ffffff] (bus address [0x90000000-0x91ffffff])
[  196.253222] pci_bus 0000:40: root bus resource [bus 40-47]
[  196.258283] Elroy version TR4.0 (0x5) found at 0xffffffff9fff2000
[  196.259558] NOTICE: PCI bus reset still asserted! (clearing)
[  196.309597] NOTICE: Enabling PCI Arbitration
[  196.345721] LBA 0:9: PCI host bridge to bus 0000:48
[  196.345952] pci_bus 0000:48: root bus resource [io  0x70000-0x7ffff] (bus address [0x0000-0xffff])
[  196.346481] pci_bus 0000:48: root bus resource [mem 0xffffffff92000000-0xffffffff93ffffff] (bus address [0x92000000-0x93ffffff])
[  196.349171] pci_bus 0000:48: root bus resource [bus 48-4f]
[  196.352751] Elroy version TR4.0 (0x5) found at 0xffffffff9fff4000
[  196.390670] LBA 0:10: PCI host bridge to bus 0000:50
[  196.390908] pci_bus 0000:50: root bus resource [io  0x80000-0x8ffff] (bus address [0x0000-0xffff])
[  196.391437] pci_bus 0000:50: root bus resource [mem 0xffffffff94000000-0xffffffff95ffffff] (bus address [0x94000000-0x95ffffff])
[  196.393223] pci_bus 0000:50: root bus resource [bus 50-57]
[  196.395304] pci 0000:50:00.0: [8086:0964] type 01 class 0x060400
[  196.397476] pci 0000:50:00.1: [8086:1960] type 00 class 0x0e0001
[  196.399242] pci 0000:50:00.1: reg 0x10: [mem 0x00000000-0x003fffff pref]
[  196.401481] pci 0000:50:00.1: reg 0x30: [mem 0x00000000-0x00007fff pref]
[  196.402895] pci 0000:50:00.0: Changing bridge control from 0x00000002 to 0x00000023
[  196.404153] pci_bus 0000:51: extended config space not accessible
[  196.405785] pci 0000:50:00.0: PCI bridge to [bus 51-57]
[  196.405998] pci 0000:50:00.0:   bridge window [io  0x80000-0x80fff]
[  196.407359] pci 0000:50:00.0:   bridge window [mem 0x00000000-0x000fffff]
[  196.407634] pci 0000:50:00.0:   bridge window [mem 0x00000000-0x000fffff pref]
[  196.409174] pci_bus 0000:51: busn_res: [bus 51-57] end is updated to 51
[  196.411235] pci 0000:50:00.1: BAR 0: assigned [mem 0xffffffff94000000-0xffffffff943fffff pref]
[  196.413189] pci 0000:50:00.1: BAR 6: assigned [mem 0xffffffff94400000-0xffffffff94407fff pref]
[  196.417314] pci 0000:50:00.0: PCI bridge to [bus 51]
[  196.417314] pci 0000:50:00.0:   bridge window [io  0x80000-0x80fff]
[  196.421249] Elroy version TR4.0 (0x5) found at 0xffffffff9fff8000
[  196.459456] LBA 0:12: PCI host bridge to bus 0000:60
[  196.459694] pci_bus 0000:60: root bus resource [io  0x90000-0x9ffff] (bus address [0x0000-0xffff])
[  196.460266] pci_bus 0000:60: root bus resource [mem 0xffffffff98000000-0xffffffff99ffffff] (bus address [0x98000000-0x99ffffff])
[  196.461224] pci_bus 0000:60: root bus resource [bus 60-67]
[  196.463241] pci 0000:60:00.0: [1011:0019] type 00 class 0x020000
[  196.463595] pci 0000:60:00.0: reg 0x10: [io  0xb7eff800-0xb7eff87f]
[  196.465214] pci 0000:60:00.0: reg 0x14: [mem 0xbf7d7800-0xbf7d7bff]
[  196.469416] pci 0000:60:00.0: reg 0x30: [mem 0xd9ec0000-0xd9efffff pref]
[  196.470649] pci 0000:60:00.0: can't claim BAR 0 [io  0xb7eff800-0xb7eff87f]: no compatible bridge window
[  196.473161] pci 0000:60:00.0: can't claim BAR 1 [mem 0xbf7d7800-0xbf7d7bff]: no compatible bridge window
[  196.475297] pci 0000:60:00.0: can't claim BAR 6 [mem 0xd9ec0000-0xd9efffff pref]: no compatible bridge window
[  196.477285] pci 0000:60:00.0: BAR 6: assigned [mem 0xffffffff98000000-0xffffffff9803ffff pref]
[  196.481162] pci 0000:60:00.0: BAR 1: assigned [mem 0xffffffff98040000-0xffffffff980403ff]
[  196.483264] pci 0000:60:00.0: BAR 0: assigned [io  0x90000-0x9007f]
[  196.486770] powersw: Soft power switch support not available.
[  196.501690] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[  196.509547] iommu: Default domain type: Translated 
[  196.509782] vgaarb: loaded
[  196.513651] NetLabel: Initializing
[  196.514033] NetLabel:  domain hash size = 128
[  196.514187] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[  196.517153] NetLabel:  unlabeled traffic allowed by default
[  196.657177] VFS: Disk quotas dquot_6.6.0
[  196.657529] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[  196.660107] AppArmor: AppArmor Filesystem Enabled
[  196.674170] NET: Registered protocol family 2
[  196.677556] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[  196.677870] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[  196.681642] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[  196.684293] TCP: Hash tables configured (established 32768 bind 32768)
[  196.685600] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[  196.686455] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[  196.689025] NET: Registered protocol family 1
[  196.689196] NET: Registered protocol family 44
[  196.689357] PCI: CLS 16 bytes
[  196.691258] Trying to unpack rootfs image as initramfs...
[  200.101292] Freeing initrd memory: 37940K
[  200.101517] clocksource: cr16_unstable: mask: 0xffffffffffffffff max_cycles: 0xc9cd436c30, max_idle_ns: 440795235170 ns
[  200.103100] Chassis warnings not supported.
[  200.105318] Performance monitoring counters enabled for Marcato W+ (rp5470)?
[  200.110309] Initialise system trusted keyrings
[  200.117278] Key type blacklist registered
[  200.117746] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[  200.133819] zbud: loaded
[  200.137473] integrity: Platform Keyring initialized
[  200.137473] Key type asymmetric registered
[  204.449236] random: crng init done
[  204.449194] Asymmetric key parser 'x509' registered
[  209.754104] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[  209.754110] io scheduler mq-deadline registered
[  209.757349] PDC Stable Storage facility v0.30
[  210.369215] STI GSC/PCI core graphics driver Version 0.9b
[  210.369677] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[  210.369677] serial 0000:00:04.1: enabling device (0142 -> 0143)
[  210.373489] printk: console [ttyS0] disabled
[  210.397208] 0000:00:04.1: ttyS0 at MMIO 0xffffffff80000000 (irq = 70, base_baud = 115200) is a 16550A
[  210.397745] printk: console [ttyS0] enabled
[  210.398236] printk: bootconsole [ttyB0] disabled
[  210.401329] 0000:00:04.1: ttyS1 at MMIO 0xffffffff80000008 (irq = 70, base_baud = 115200) is a 16450
[  210.421168] 0000:00:04.1: ttyS2 at MMIO 0xffffffff80000010 (irq = 70, base_baud = 115200) is a 16550A
[  210.441166] 0000:00:04.1: ttyS3 at MMIO 0xffffffff80000030 (irq = 70, base_baud = 115200) is a 16550A
[  210.445214] serial 0000:00:04.1: Couldn't register serial port 0, irq 70, type 2, error -28
[  210.446318] Linux agpgart interface v0.103
[  210.446318] quicksilver: No Pluto found, so no AGPGART for you.
[  210.449345] mousedev: PS/2 mouse device common for all mice
[  210.453338] rtc-generic rtc-generic: registered as rtc0
[  210.453338] rtc-generic rtc-generic: setting system clock to 2020-11-17T12:50:20 UTC (1605617420)
[  210.457230] ledtrig-cpu: registered to indicate activity on CPUs
[  210.457633] NET: Registered protocol family 10
[  210.463119] process '/usr/bin/kmod' started with executable stack
[  210.561461] Segment Routing with IPv6
[  210.561461] mip6: Mobile IPv6
[  210.561520] NET: Registered protocol family 17
[  210.561991] mpls_gso: MPLS GSO support
[  210.561991] registered taskstats version 1
[  210.561991] Loading compiled-in X.509 certificates
[  210.581663] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[  210.582037] Loaded X.509 cert 'Debian Secure Boot Signer 2020: 00b55eb3b9'
[  210.583078] zswap: loaded using pool lzo/zbud
[  210.585755] Key type ._fscrypt registered
[  210.585755] Key type .fscrypt registered
[  210.585755] Key type fscrypt-provisioning registered
[  210.586427] AppArmor: AppArmor sha1 policy hashing enabled
[  210.587181] Unstable clock detected, switching default tracing clock to "global"
               If you want to keep using the local clock, then add:
                 "trace_clock=local"
               on the kernel command line
[  211.729063] Freeing unused kernel memory: 1024K
[  211.732379] Write protected read-only-after-init data: 91k
[  211.732833] Run /init as init process
[  211.732963]   with arguments:
[  211.732969]     /init
[  211.732974]   with environment:
[  211.732980]     HOME=/
[  211.732985]     TERM=vt102
[  211.732990]     palo_kernel=2/vmlinux
[  212.497625] tulip: module verification failed: signature and/or required key missing - tainting kernel
[  212.539618] tulip 0000:00:00.0: enabling device (0140 -> 0143)
[  212.551752] tulip0: no phy info, aborting mtable build
[  212.553209] tulip0:  MII transceiver #1 config 1000 status 782d advertising 0061
[  212.558898] SCSI subsystem initialized
[  212.610060] net eth0: Digital DS21142/43 Tulip rev 65 at MMIO 0xffffffff80005000, 00:30:6e:48:46:c6, IRQ 66
[  212.641582] tulip 0000:60:00.0: enabling device (0000 -> 0003)
[  212.641853] tulip 0000:60:00.0: enabling SERR and PARITY (0003 -> 0143)
[  212.655682] tulip1: EEPROM default media type Autosense
[  212.655912] tulip1: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block
[  212.654146] sym53c8xx 0000:00:01.0: enabling device (0000 -> 0003)
[  212.654727] sym53c8xx 0000:00:01.0: enabling SERR and PARITY (0003 -> 0143)
[  212.658975] tulip1:  MII transceiver #1 config 3100 status 7849 advertising 0101
[  212.662217] tulip1:  Advertising 01e1 on PHY 1, previously advertising 0101
[  212.679864] net eth1: Digital DS21142/43 Tulip rev 65 at MMIO 0xffffffff98040000, 00:30:6e:4a:66:53, IRQ 72
[  212.745404] sym0: <896> rev 0x7 at pci 0000:00:01.0 irq 67
[  212.750749] sym0: PA-RISC Firmware, ID 7, Fast-40, LVD, parity checking
[  212.753140] sym0: SCSI BUS has been reset.
[  212.757203] scsi host0: sym-2.2.3
[  212.761633] sym53c8xx 0000:00:01.1: enabling device (0146 -> 0147)
[  212.830612] sym1: <896> rev 0x7 at pci 0000:00:01.1 irq 68
[  212.838745] sym1: PA-RISC Firmware, ID 7, Fast-40, SE, parity checking
[  212.845140] sym1: SCSI BUS has been reset.
[  212.850955] sym1: SCSI BUS mode change from SE to SE.
[  212.849310] scsi host1: sym-2.2.3
[  212.853140] sym1: SCSI BUS has been reset.
[  212.857911] sym53c8xx 0000:00:02.0: enabling device (0000 -> 0003)
[  212.857911] sym53c8xx 0000:00:02.0: enabling SERR and PARITY (0003 -> 0143)
[  212.925268] sym2: <875> rev 0x37 at pci 0000:00:02.0 irq 68
[  213.014065] sym2: PA-RISC Firmware, ID 7, Fast-20, SE, parity checking
[  213.017140] sym2: SCSI BUS has been reset.
[  213.021213] scsi host2: sym-2.2.3
[  213.027247] sym53c8xx 0000:00:02.1: enabling device (0000 -> 0003)
[  213.027484] sym53c8xx 0000:00:02.1: enabling SERR and PARITY (0003 -> 0143)
[  213.097394] sym3: <875> rev 0x37 at pci 0000:00:02.1 irq 69
[  213.185327] sym3: PA-RISC Firmware, ID 7, Fast-20, SE, parity checking
[  213.189140] sym3: SCSI BUS has been reset.
[  213.193187] scsi host3: sym-2.2.3
[  215.945460] scsi 1:0:0:0: Direct-Access     COMPAQ   BF1468A4CC       HPB5 PQ: 0 ANSI: 3
[  215.945570] scsi target1:0:0: tagged command queuing enabled, command queue depth 16.
[  215.961197] scsi target1:0:0: Beginning Domain Validation
[  215.965224] scsi target1:0:0: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 31)
[  215.969218] scsi target1:0:0: Domain Validation skipping write tests
[  215.969433] scsi target1:0:0: Ending Domain Validation
[  216.137452] scsi 2:0:0:0: Direct-Access     HP 73.4G ST373454LC       HPC3 PQ: 0 ANSI: 3
[  216.137517] scsi target2:0:0: tagged command queuing enabled, command queue depth 16.
[  216.149185] scsi target2:0:0: Beginning Domain Validation
[  216.157207] scsi target2:0:0: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 15)
[  216.161196] scsi target2:0:0: Domain Validation skipping write tests
[  216.161410] scsi target2:0:0: Ending Domain Validation
[  216.845289] scsi 3:0:2:0: CD-ROM            HP       DVD-ROM 305      1.01 PQ: 0 ANSI: 2
[  216.865203] scsi target3:0:2: Beginning Domain Validation
[  216.877185] scsi target3:0:2: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 16)
[  216.885178] scsi target3:0:2: Domain Validation skipping write tests
[  216.885376] scsi target3:0:2: Ending Domain Validation
[  220.518325] sr 3:0:2:0: Power-on or device reset occurred
[  220.529558] sr 3:0:2:0: [sr0] scsi3-mmc drive: 16x/40x cd/rw xa/form2 cdda tray
[  220.529679] cdrom: Uniform CD-ROM driver Revision: 3.20
[  220.539850] sd 1:0:0:0: Power-on or device reset occurred
[  220.541326] sd 2:0:0:0: Power-on or device reset occurred
[  220.541480] sd 1:0:0:0: [sdb] 286749488 512-byte logical blocks: (147 GB/137 GiB)
[  220.543124] sd 2:0:0:0: [sda] 143374738 512-byte logical blocks: (73.4 GB/68.4 GiB)
[  220.545203] sd 1:0:0:0: [sdb] Write Protect is off
[  220.545777] sd 1:0:0:0: [sdb] Mode Sense: d3 00 10 08
[  220.548269] sd 2:0:0:0: [sda] Write Protect is off
[  220.548476] sd 2:0:0:0: [sda] Mode Sense: d3 00 10 08
[  220.549371] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA
[  220.549392] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
[  220.567056] sr 3:0:2:0: Attached scsi CD-ROM sr0
[  220.597270] sd 2:0:0:0: [sda] Attached SCSI disk
[  220.605286]  sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 >
[  220.621291] sd 1:0:0:0: [sdb] Attached SCSI disk
[  222.965096] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[  223.733283] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[  229.223782] sd 1:0:0:0: Attached scsi generic sg0 type 0
[  229.238498] sd 2:0:0:0: Attached scsi generic sg1 type 0
[  229.240297] sr 3:0:2:0: Attached scsi generic sg2 type 5
[  234.465805] net eth0: Setting full-duplex based on MII#1 link partner capability of c1e1
[  234.529259] Adding 10861972k swap on /dev/sdb6.  Priority:-2 extents:1 across:10861972k FS
[  234.733850] EXT4-fs (sdb5): re-mounted. Opts: errors=remount-ro
[  239.093351] EXT4-fs (sdb2): mounting ext2 file system using the ext4 subsystem
[  239.102314] EXT4-fs (sdb2): mounted filesystem without journal. Opts: (null)
[  239.102598] ext2 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff)
[  241.483988] audit: type=1400 audit(1605617451.252:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=977 comm="apparmor_parser"
[  241.494389] audit: type=1400 audit(1605617451.264:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=979 comm="apparmor_parser"
[  241.495065] audit: type=1400 audit(1605617451.264:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=979 comm="apparmor_parser"
[  241.525231] audit: type=1400 audit(1605617451.296:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=978 comm="apparmor_parser"
[  241.525918] audit: type=1400 audit(1605617451.296:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=978 comm="apparmor_parser"
[  241.530087] audit: type=1400 audit(1605617451.296:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=978 comm="apparmor_parser"
[  241.570088] audit: type=1400 audit(1605617451.340:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=976 comm="apparmor_parser"
[  243.501610] RPC: Registered named UNIX socket transport module.
[  243.501851] RPC: Registered udp transport module.
[  243.502222] RPC: Registered tcp transport module.
[  243.502387] RPC: Registered tcp NFSv4.1 backchannel transport module.
[  243.620345] FS-Cache: Loaded
[  243.838501] FS-Cache: Netfs 'nfs' registered for caching
[  244.076338] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).