Workstation Firmware Revisions Several inquires have been made regarding the current firmware revisions. These tab les include all B, C and J Class Workstations. Included are the bas ic fixes and enhancements. If more information is needed refer to t he specific firmware patch in the ITRC Individual Patches/F irmware Patches/CPU Patches section. B-Class: B1000, B200 0, B180L, B160L, B132L+, B132L | Model | B1000,B2000 | B180L, B160L, B132L+, B132L | | Firmware Version | 3.5 | 6.1 | | Patch Number | PF_CBJ00035 *1 | PF_CB1X0061 *2 | C-Class: C3000, C360 0, C360, C240, C200 | Model | C3000, C3600 | C360 | | Firmware Version | 3.5 | 1.4 | | Patch Number | PF_CBJ00035 *1 | PF_CC360014 *3 | C-Class: C180, C180X P, C160L, C160 | Model | C240,C200,C180XP, | C160L | | | C180,C160 | | | Firmware Version | 6.2 | 5.8 | | Patch Number | PF_CC2X0062 *4 | PF_CB1X0058 *5 | C-Class: C110, C100< /span> | Model | C110 | C100 | | Firmware Version | 1.3 | 1.2 | | Patch Number | PF_CC110013 *6 | PF_CC1X0012 *7 | J-Class: J7000, J500 0, J5600 | Model | J7000, J5000, J5600 | | Firmware Version | 3.5 | | Patch Number | PF_CBJ00035 *1 | J-Class: J2240, J282 , J280 | Model | J2240 | J282, J280 | | Firmware Version | 2.0 | 2.4 | | Patch Number | PF_CJ224020 *8 | PF_CJ28X024 *9 | J-Class: J210XC, J21 0, J200 | Model | J210XC, J210, J200 | | Firmware Version | 2.0 | | Patch Number | PF_CJ2X0020 *10 | 1) PF_CBCJ0035 Description: HP 9 000 Model B1000/B2000/C3X00/J5000 firmware 3.5 patch CPU - Corrects a register value in the PCI bridge controlle r to prevent setting address bit 32 to 0 on t ransactions mastered by fast 64 bits PCI cards into system memory on systems with more than 4GB of memory - PA8600 Da ta Cache LRU off - Improve S YNC_OUTDLY setting GRAPHICS - Disab le accesses to expansion ROM if ROM is me mory-mapped and card has single decoder.< /span> This update is equivalent to software patch P HSS_21082 for HPUX 10.20 and PHSS_21083 for H PUX 11.00. 2) PF_CB1X0061 Description: HP 9 000 Model B132L, B160, B132L+, B180L firmware 6.1 - Added support for up to two fxe graphics cards 3) PF_CC360014 Description: HP 9 000 Model C360 revision 1.4 firmware patch - Reset the cor e LAN to prevent hangs during reboot and shutdowns 4) PF_CC2X0062 Description: HP 9 000 Models C160/C180/C200/C240 revision 6.2 firmware - Reset the cor e LAN to prevent hangs during reboot and shutdowns 5) PF_CB1X0058 Description: HP 9000 Model C160L firmware 5.8 - Supports lat est version of LAN controller chipset 6) PF_CC110013 Description: HP 9 000 Model C110 revision 1.3 firmware patch - Switch real time clock source to LASI controller rather than U2 7) PF_CC1X0012 Description: HP 9 000 Model C110 revision 1.2 firmware patch - Adds Secure M ode boot option; - Adds support for new mememory (A4209A,64MB); - Fixes LAN IOD C hang problem when booting on a loaded LAN 8) PF_CJ224020 Description: HP 9 000 Model J2240 firmware 2.0 patch Fixes LAN timeo ut problem when the BCH lan search command is used The BCH search LAN command now allows the number of retries to be set to specific values. Two different types can be controlled: the number of r etries while searching for a server and the number of retries duri ng an IO transfer. These values are set by specifying a LAN IP (all zeros means search for any available server) followe d by the search retry number and the IO retry number. Exampl e: sea lan.0.0.0.0.5.100 specifies a search for any available s erver retrying search packets 5 times and IO packets 100 tim es. Firmware update s will now keep the current EEPROM settings for boot paths and configurations rather than resetting them to defaults. A "-5 returned by LAN entry init" is now only displayed if a specific "sea rch lan" is used vs a general "search". A message suggesting that a LAN cable may be missing or not connected will be display ed also. 9) PF_CJ28X024 Description: HP 9 000 Model J280/J282 revision 2.4 firmware patch PVT locked down (Processor internal bus drive value is read and locked just before loading ISL.) to prevent a intermittant sys tem hang which doesn't respond to TOC 10) PF_CJ2X0020 Description: HP 9000 Model J2X0 revision 2.0 firmware patch Correct a flash ROM checksum error that causes intermittant sys tem halts with error codes of 3000 or 3001 Original KMine AN pamWS200004131