firmware_patches/hp/cpu/PF_C7120016 :712:1.6: 1Liner: HP 9000 Model 712 revision 1.6 firmware patch CDate: 94/10/01 PDate: 94/11/11 Desc: The primary purpose for this patch is to provide 10.0 HP-UX functionality to boot across a gateway. Desc: Also includes: - Add support for monochrome; fix VESA - Allow 2GBYTE ISL BOOT - Exabyte 8mm BOOT - Graphics keyboard "ESCAPE" from RS-232 to graphics console. (Pressing the escape key on the graphics keyboard returns console to the default graphics console.) - Additional delay to allow slow disks to autoboot. SR: None DTS: None HWDep: 9000/712 Supers: None Owner: 40RG/SDT firmware_patches/hp/cpu/PF_C7120020 :712:2.0: 1Liner: HP 9000 Model 712 revision 2.0 firmware patch CDate: 95/07/25 PDate: 95/08/07 Desc: - Use of 100 mhz processor speed. - Additional 2 simm slot support for 712/100. - Added support for 3270 keyboard - Repaired LAN booting problems for busy networks - Counting ARP retries correctly on recoverable errors - Set default timeout - Streamlined boot process so that stable store value are not affected when booting from LAN SR: None DTS: None HWDep: 9000/712 Supers: PF_C7120016 Owner: 40RG/SDT firmware_patches/hp/cpu/PF_C7120022 :712:2.2: 1Liner: HP 9000 Model 712 revision 2.2 firmware patch CDate: 95/09/29 PDate: 95/10/11 Desc: The primary purpose for this patch is to provide more reliable LAN functionality. SR: None DTS: None HWDep: 9000/712 Supers: PF_C7120016 PF_C7120020 Owner: 40RG/SDT firmware_patches/hp/cpu/PF_C7120023 :712:2.3: 1Liner: HP 9000 Model 712 revision 2.3 firmware patch CDate: 96/03/28 PDate: 96/04/17 Desc: fixes problem with recognition of some teleshare cards (A4012AA). SR: None DTS: None HWDep: 9000/712 Supers: PF_C7120016 PF_C7120020 PF_C7120022 Owner: 40RG/SDT firmware_patches/hp/cpu/PF_C7440032 :744/132L:744/165L:3.2: 1Liner: HP 9000 Model 744/132L, 744/165L revision 3.2 firmware patch CDate: 97/10/30 PDate: 97/10/31 Desc: - Added support for 165MHz w/512KB SLC. - Added support for PMC bridge and expander. - Added support for 128MB Memory Cards. SR: None DTS: None HWDep: 9000/744/132L, 9000/744/165L Supers: None Owner: 29CH/ITL firmware_patches/hp/cpu/PF_C7440033 :744/132L:744/165L:3.3: 1Liner: HP 9000 Model 744/132L, 744/165L revision 3.3 firmware patch CDate: 98/04/28 PDate: 98/05/26 Desc: - Added Boot Delay Timer feature. - Added disable of 3rd party bus arbitrtaion on entry to PDCE_RESET during reboot to alleviate potential problems due to PCI and/or EISA bus masters running GSC cycles during reboots. - Added check for bad GSC-to-PCI (Dino) bridge configurations which displays any offending configurations and sets STOP_BOOT when a bad configuration is detected. - Added reset of EISA subsystem in PDC_IO (called during panics) due to HPMCs caused by EISA bus masters (which use lock cycles) during panic handling. - Added reset of EISA subsystem upon entry to PDCE_RESET during reboots to alleviate EISA reboot crash problems. - Defect fix for hung PCI interrupts after reboots. SR: None DTS: None HWDep: HP 9000 Model 744/132L, 744/165L Supers: PF_C7440032 Owner: 29CH/ITL firmware_patches/hp/cpu/PF_C7440040 :744/132L:744/165L:4.0: 1Liner: HP 9000 Model 744/132L, 744/165L revision 4.0 firmware patch CDate: 98/10/11 PDate: 98/10/14 Desc: - Added console support for Graffiti PMC display adapter. - Corrected/eliminated corruption of CR27 and CR28 registers upon return from PDC_CALL. This register corruption has been present in all releases prior to this release, revision 4.0. - Corrected autoboot failure when FASTBOOT is enabled. This defect was _only_ present in revision 3.3 of the Model 744 firmware. SR: None DTS: None HWDep: HP 9000 Model 744/132L, 744/165L Supers: PF_C7440032 PF_C7440033 Owner: 29CH/ITL firmware_patches/hp/cpu/PF_C7440043 :744/132L:744/165L:4.3: 1Liner: HP 9000 Model 744/132L, 744/165L revision 4.3 firmware patch CDate: 99/05/24 PDate: 99/06/23 Desc: - New Features: o Added PciDelay command to service menu. o Added RETRY flag to AUto command under COfig menu to force infinite auto boot/search loop until a boot device is found. o No longer check LAN ID prefixes. - Defects corrected in this Release: o No longer corrupt TOC vector when calling PDC_SYSTEM_INFO o Free configured VME Master Mapper entries after boot searches to eliminate resource exhaustion. o Changed default VME bus arbitration mode to Round-Robin (from priority) and request mode to fairness (from release-when-done) to eliminate crashes during simultaneous booting of multiple BPN clients. o Allow use of Artist graphics as boot console when installed in the last graphics slot found and no builtin graphics present. SR: None DTS: None HWDep: HP 9000 Model 744/132L, 744/165L Supers: PF_C7440032 PF_C7440033 PF_C7440040 Owner: 29CH/ITL firmware_patches/hp/cpu/PF_C7440044 :744/132L:744/165L:firmware:4.4: 1Liner: HP 9000 Model 744/132L, 744/165L revision 4.4 firmware patch CDate: 99/12/06 PDate: 00/02/14 Desc: - New Features: o Added support for PCI resources which require up to a maximum memory chunk size of 64MB MMIO to accomodate the Barco Enhancement Request for their PMC based Barco graphics card configurations. Prior to this release, this limit was 32MB. - Defects corrected in this Release: o Perform SW_ID verfiy after Stable Store verify since Stable Store must be valid prior to verification of SW_ID. This eliminates the STOP BOOT error condition which may occur during manufacturing test processes and/or field maintenance procedures which modify the product LAN ID. N.B. The noted error condition is _only_ present in revision 4.3 of the Model 744 firmware and is resolved by resetting the system after initially experiencing the condition. o Initiliaze P2P bridge PREFETCH_BASE/LIMIT_UPPER registers to zero instead of -1 since the later maps the 64-bit capable bridge's prefetch memory resource to an address which is not accessible on 32-bit (address) host bridges such as Dino, i.e. 64-bit address capable bridges were previously mapped into the last 4GB of (64-bit address) MMIO space and would therefore _never_ respond to the single (32-bit) address PCI cycles mastered by Dino. SR: None DTS: None HWDep: HP 9000 Model 744/132L, 744/165L Supers: PF_C7440032 PF_C7440033 PF_C7440040 PF_C7440043 Owner: 29CH/ITL firmware_patches/hp/cpu/PF_C7X50014 :715:725: 1Liner: HP 9000 Models 715 and 725 revision 1.4 firmware patch CDate: 95/02/13 PDate: 95/04/17 Desc: The primary purpose for this patch is to provide 10.0 HP-UX functionality to boot across a gateway. Also included: - Fix VESA - Allow 2GBYTE ISL BOOT - Additional delay to allow slow disks to autoboot. SR: None DTS: None HWDep: HP 9000 Model 715/64/80/100 and 725/100 only Supers: None Owner: 40RG/SDT firmware_patches/hp/cpu/PF_C7X50016 :715:725:1.6: 1Liner: HP 9000 Models 715 and 725 revision 1.6 firmware patch CDate: 95/09/29 PDate: 95/10/11 Desc: Lan changes have been made to improve reliability. SR: None DTS: None HWDep: HP 9000 Model 715/64/80/100 and 725/100 only Supers: PF_C7X50014 Owner: 40RG/SDT firmware_patches/hp/cpu/PF_CB1X0023 :B132:B160:C160L: 1Liner: HP 9000 Models B132, B160, C160L revision 2.3 firmware patch CDate: 96/11/26 PDate: 96/12/06 Desc: - added memory warning bit for mixing EDO with FPM SIMMs - cycle through monitor types if type is set invalid - added cache/processor incompatibility warning - supports new range of expected LAN ID - improved TLB handling SR: None DTS: None HWDep: HP 9000 Model B132, B160, C160L Supers: None Owner: 40RG/SDT firmware_patches/hp/cpu/PF_CB1X0025 :B132:B160:C160L:2.5: 1Liner: HP 9000 Models B132, B160, C160L revision 2.5 firmware patch CDate: 97/02/03 PDate: 97/02/04 Desc: - fixes 2.3 License command date wrap problem - added support for 3rd Party Dome graphics card **** ATTENTION ***** - Dome card requires the latest STI ROM upgrade for correct operation - Dome card is NOT supported with any other add-on graphics cards SR: None DTS: None HWDep: HP 9000 Model B132, B160, C160L Supers: PF_CB1X0023 Owner: 40RG/SDT firmware_patches/hp/cpu/PF_CB1X0050 :B132:B160:C160L: 1Liner: HP 9000 Models B132, B160, C160L revision 5.0 firmware patch CDate: 97/09/22 PDate: 97/09/29 Desc: - scans for PCI cards usage on old backplanes and halts system if condition is found. HP will replace backplane with newer version that supports PCI cards - improves LAN functionality on AUI - allow fwscsi initiator ID settings for 8-15 - pre-enable 3rd party graphics cards - implements chassis codes to on or off to serial port 1 in the BCH service menu - allow disk dumps to Quantum 32150WD disks - enables support of new Ultra SCSI and 100BT Lan on C200 - enables support of 512MB SIMMS SR: None DTS: None HWDep: HP 9000 Model B132, B160, C160L Supers: PF_CB1X0023 PF_CB1X0025 Owner: 40RG/SDT firmware_patches/hp/cpu/PF_CB1X0052 :B132:B160:C160L:B132L+:B180L:5.2: 1Liner: HP 9000 Models B132, B160, C160L, B132L+, B180L firmware 5.2 CDate: 98/03/05 PDate: 98/03/30 Desc: - resolves TOC hang with a graphics console - supports PCI Visualize EG graphics card - supports 2GB of main memory - eliminates selftest checksum errors 3000 in AMD EEPROM - send chassis code before reboot - resolves a soft boot error - allow configurable PCI delay for slower PCI cards SR: None DTS: None HWDep: HP 9000 Model B132, B160, C160L, B132L+, B180L Supers: PF_CB1X0023 PF_CB1X0025 PF_CB1X0050 Owner: 40RG/SDT firmware_patches/hp/cpu/PF_CB1X0056 :B132:B160:C160L:B132L+:B180L:5.6: 1Liner: HP 9000 Models B132, B160, C160L, B132L+, B180L firmware 5.6 CDate: 98/09/03 PDate: 98/09/04 Desc: - No longer check LAN ID prefixes - No longer corrupt TOC vector by calling PDC_SYSTEM_INFO - Swap the restore of cr27 and cr28 after a PDC call - Added PciDelay command to service menu. SR: None DTS: None HWDep: HP 9000 Model B132, B160, C160L, B132L+, B180L Supers: PF_CB1X0023 PF_CB1X0025 PF_CB1X0050 PF_CB1X0052 Owner: 40RG/SDT firmware_patches/hp/cpu/PF_CB1X0058 :C160L:5.8: 1Liner: HP 9000 Models C160L firmware 5.8 CDate: 98/10/09 PDate: 98/10/14 Repost: 99/11/22 The patch was re-released for use with the C160L only. Desc: - supports latest version of LAN controller chipset SR: None DTS: None HWDep: HP 9000 Model C160L Supers: PF_CB1X0023 PF_CB1X0025 PF_CB1X0050 PF_CB1X0052 PF_CB1X0056 Owner: 40RG/SDT firmware_patches/hp/cpu/PF_CB1X0060 :B132:B160:C160L:B132L+:B180L:6.1: 1Liner: HP 9000 Models B132L, B160, C160L, B132L+, B180L firmware 6.1 CDate: 99/03/15 PDate: 99/03/15 Desc: - fixes LAN timeout problem when the BCH lan search command is used - the BCH search LAN command now allows the number of retries to be set to specific values. Two different types can be controlled: the number of retries while searching for a server and the number of retries during an IO transfer. These values are set by specifying a LAN IP (all zeros means search for any available server) followed by the search retry number and the IO retry number. Example: sea lan.0.0.0.0.5.100 specifies a search for any available server retrying search packets 5 times and IO packets 100 times. - a "-5 returned by LAN entry init" is now only displayed if a specific "search lan" is used vs a general "search". A message suggesting that a LAN cable may be missing or not connected will be displayed also. SR: None DTS: None HWDep: HP 9000 Model B132, B160, C160L, B132L+, B180L Supers: PF_CB1X0023 PF_CB1X0025 PF_CB1X0050 PF_CB1X0052 PF_CB1X0056 PF_CB1X0058 Owner: 40RG/SDT firmware_patches/hp/cpu/PF_CB1X0061 :B132:B160:B132L+:B180L:6.1: 1Liner: HP 9000 Models B132L, B160, B132L+, B180L firmware 6.1 CDate: 99/10/15 PDate: 99/10/26 Repost: 99/11/15 Removed support for C160L. Desc: - added support for up to two fxe graphics cards SR: None DTS: None HWDep: HP 9000 Model B132, B160, B132L+, B180L Supers: PF_CB1X0023 PF_CB1X0025 PF_CB1X0050 PF_CB1X0052 PF_CB1X0056 PF_CB1X0058 PF_CB1X0060 Owner: 40RG/SDT firmware_patches/hp/cpu/PF_CBCJ0019 :B1000:C3000:J5000:J7000:firmware:1.9: 1Liner: HP 9000 Model B1000/C3000/J5000/J7000 firmware 1.9 patch CDate: 99/07/01 PDate: 99/07/07 Desc: PROCESSOR - Set 2WB bit in Status0 on J5000/J7000 - Data cache store queue test improved MEMORY - BCH command "SER PDT CLEAR" works - Firmware deallocates inaccessible DIMMs - Firmware attempts to isolate single-bit errors to a single DIMM on J7000 HPMC/TRAPS/PIM - Memory Error Log information is reported in PIM for HPMC - All parts of PIM are cleared when they should be - The CPU State word in TOC PIM is valid - When a system HPMCs while running Unix, it will complete the dump to disk successfully even if the system had a previous HPMC and it was not rebooted BCH - "CO LC" command can now be used to manually set full- or half-duplex LAN - "SESCSI" added as alias for "SCSI", for backward compatibility USB KEYBOARD - USB supports a PS2 keybord connected to USBtoPS2 converter cable - Fixes a problem that caused a call to USB IODC Entry init to cause HPMC after the DST WDIAG test was executed. - Retries the input device while in BCH, offering a limited USB hot-swap and recovery from accidental disconnection of keyboard NOTE: This functionality is only available while the system is in BCH. - Control keystrokes (^A to ^Z) are now reported. SERIAL (RS232) CONSOLE - Shows serial console baud rate on LCD, unless it is the standard 9600 baud - Fixed problem that stopped system if serial console user tried to stop autoboot too early FANS - Multiple fan failures now produce multiple chassis codes - fans now run quieter in B1000/C3000 MISCELLANEOUS - Failing Real Time Clock module now generates a WARNing visible at BCH - The LIF volume has a new CONFIGDATA file that understands J5k/7k and B1k/C3k HVersions - The LIF volume has a larger pad file at the end, to improve updating from SCSI CD-ROM drives - Fixed bug that prohibited booting Recovery Tape from DSS (SCSI) tape drive - Fixed two bugs that could cause unintentional modification to the Flash ROM content - Flash ROM is always checksummed now, independent of the Fastboot flag SR: None DTS: None HWDep: HP 9000 Model B1000, C3000, J5000, J7000 Supers: None Owner: 40RG/SDT firmware_patches/hp/cpu/PF_CBCJ0023 :B1000:C3000:J5000:J7000:firmware:2.3: 1Liner: HP 9000 Model B1000/C3000/J5000/J7000 firmware 2.3 patch CDate: 99/09/10 PDate: 99/09/10 Desc: PROCESSOR/CACHE - Supports PA8500 processor rev 2.4 - The instruction cache self-tests execute faster. PDC - Added support for future processor - Improved SICL support and data reporting from PCI bridge controller MEMORY - All physical memory is reported to HP-UX - Add support for 1 GB DIMMs - Adds support for DIMMs that may have SGS SPD EEPROMs. - Better reporting of IO/Memory controller errors. - Memory self-test no longer updates the chassis every 128MB. It now varies according to memory amount. HPMC/TRAPS/PIM - HPMC PIM Analysis section added to the HPMC PIM. The analysis can be retrieved using the standard PIM retrival tools. The analysis explains the HPMC from both the CPU's and the IO/Memory Controller's perspective. - HPMC handler now correctly fills in the System Requester Address. - Fixed PIM dump to contain correct responder path if available. - When the CPU times out trying to talk to memory (Timeout HPMC), the address 0xfffffffffed10200 is logged in the System Responder Address rather than 0xfffffffffed10000. BOOTSTRAP - The Flash EEPROM is now protected against accidental reprogramming. - The FUPDATE command in "updatelif" enables Flash programming. - Bad fans are detected at boot time ; chassis codes and LCD second line message are printed - Added failed PCI chassis code if toggling rope_debug register fails - Change HPA selected routine for PCI devices to use first memory BAR whether it is prefetchable or not. BCH - The "IN SC" command has been added, to print system configuration. - The "IN IO" command prints "(no firmware driver)" for plug-in cards for which IODC could not be found (possibly because the card is not supported by firmware for boot/console/keyboard use). LCD - Added LCD-only diagnostic chassis codes. - 7000 LCD messages no longer have embedded spaces when running ODE MEMTEST - Three LCD chassis code English strings now say "Iodc" or "IODC" instead of "boot", since they can result from console device's IODC. GRAPHICS - A4452A graphics is improved. SCSI - Improved booting support for new DDS3 tape drives. - Allow booting a wide disk connected to narrow SE SCSI SR: None DTS: None HWDep: HP 9000 Model B1000, C3000, J5000, J7000 Supers: PF_CBCJ0019 Onwer: 40RG/SDT firmware_patches/hp/cpu/PF_CBCJ0031 :B1000:C3000:J5000:J7000:firmware:3.1: 1Liner: HP 9000 Model B1000/C3000/J5000/J7000 firmware 3.1 patch CDate: 99/10/26 PDate: 99/10/29 Desc: EEPROM - EEPROM is cleared when PDC revision changes, but path settings are preserved. PCI - HP A5513A ATM card support added in all PCI slots - HP A5515A ATM card support added in all PCI slots except for B1000/C3000 slot 2 PDCE - PDC_SYSTEM_INFO option 1 now reports correctly. CDROM - Support added for TEAC and Mitsumi IDE CDROMs SR: None DTS: None HWDep: HP 9000 Model B1000, C3000, J5000, J7000 Supers: PF_CBCJ0019 PF_CBCJ0023 Onwer: 40RG/SDT firmware_patches/hp/cpu/PF_CBCJ0032 :B1000:C3000:J5000:J7000:firmware:3.2: 1Liner: HP 9000 Model B[12]000/C3000/J[57]000 firmware 3.2 patch CDate: 99/12/03 PDate: 99/12/16 Desc: SYSTEM - added support for B2000 SCSI - added boot support from Toshiba SCSI CD-ROM PCI - improved PCI bridge function GRAPHICS - turn-on monitor selection will not try a sync -on-green monitor type SR: None DTS: None HWDep: HP 9000 Model B1000, B2000, C3000, J5000, J7000 Supers: PF_CBCJ0019 PF_CBCJ0023 PF_CBCJ0031 Owner: 40RG/SDT firmware_patches/hp/cpu/PF_CBCJ0034 :B1000:C3000:J5000:J7000:firmware:3.4: 1Liner: HP 9000 Model B[12]000/C3000/J[57]000 firmware 3.4 patch CDate: 00/01/15 PDate: 00/01/28 Desc: CPU - PA8600 Data Cache LRU off - improve SYNC_OUTDLY setting GRAPHICS - disable accesses to expansion ROM if ROM is memory-mapped and card has single decoder. SR: None DTS: None HWDep: HP 9000 Model B1000, B2000, C3000, J5000, J7000 Supers: PF_CBCJ0019 PF_CBCJ0023 PF_CBCJ0031 PF_CBCJ0032 Owner: 40RG/SDT firmware_patches/hp/cpu/PF_CBCJ0035 :B[12]000:C3X00:J[567]X00:firmware:3.5: 1Liner: HP 9000 Model B[12]000/C3000/J[57]000 firmware 3.5 patch CDate: 00/03/29 PDate: 00/04/10 Repost: 00/04/14 The patch documentation was modified to correct the sum(1) value of the file CBCJ0035.frm. The checksum was incorrectly reported as '337361' instead of '37361'. Desc: CPU - corrects a register value in the PCI bridge controller to prevent setting address bit 32 to 0 on transactions mastered by fast 64 bits PCI cards into system memory on systems with more than 4GB of memory - PA8600 Data Cache LRU off - improve SYNC_OUTDLY setting GRAPHICS - disable accesses to expansion ROM if ROM is memory-mapped and card has single decoder. This update is equivalent to software patch PHSS_21082 for HPUX 10.20 and PHSS_21083 for HPUX 11.00. SR: None DTS: None HWDep: HP 9000 Model B1000, B2000, C3X00, J5X00, J6000, J7000 Supers: PF_CBCJ0019 PF_CBCJ0023 PF_CBCJ0031 PF_CBCJ0032 PF_CBCJ0034 Owner: 40RG/SDT firmware_patches/hp/cpu/PF_CBCJ0040 :B[12]000:C3X00:J[567]X00:firmware:4.0: 1Liner: HP 9000 Model B[12]000/C3X00/J[567]X00 firmware 4.0 patch CDate: 00/05/08 PDate: 00/06/07 Desc: SYS - supports J6000 - fixes a cache selftest failure - LPMC handler does not touch any RDR registers during LPMC processing I/O - enables B5506A Ethernet PCI card support - fix to the PCI memory allocator to support J3525A, J2526A X.25 PCI card - fix to keep RS232 from hanging during early chassis code for 3 wire RS232 connections - reads the status command twice if an error is detected to fix a Mitsumi CD ROM problem on B2000 This update is equivalent to software patch PHSS_21620 for HPUX 10.20 and PHSS_21621 for HPUX 11.00. SR: None DTS: None HWDep: HP 9000 Model B1000, B2000, C3X00, J5X00, J6000, J7000 Supers: PF_CBCJ0019 PF_CBCJ0023 PF_CBCJ0031 PF_CBCJ0032 PF_CBCJ0034 PF_CBCJ0035 Owner: 40RG/SDT firmware_patches/hp/cpu/PF_CBCJ0045 :B[12]000:C3X00:J[567]X00:firmware:4.5: 1Liner: HP 9000 Model B[12]000/C3X00/J[567]X00 firmware 4.5 patch CDate: 00/10/06 PDate: 00/10/12 Desc: PCI - Supports Z7476AA ACC card - Recognizes and resets LBA during LPMC,TOC, or panic to improve system dumps BCH - revises FASTBOOT message to print "NOTICE" instead of "WARNING" This update is equivalent to software patch PHSS_22474 for HPUX 10.20 and PHSS_22475 for HPUX 11.00. SR: None DTS: None HWDep: HP 9000 Model B1000, B2000, C3X00, J5X00, J6000, J7000 Supers: PF_CBCJ0019 PF_CBCJ0023 PF_CBCJ0031 PF_CBCJ0032 PF_CBCJ0034 PF_CBCJ0035 PF_CBCJ0040 Owner: 40RG/SDT firmware_patches/hp/cpu/PF_CBCJ0046 :B[12]000:C3X00:J[567]X00:firmware:4.6: 1Liner: HP 9000 Model B[12]000/C3X00/J[567]X00 firmware 4.6 patch CDate: 00/10/24 PDate: 00/11/10 Desc: HPMC - Saved timestamp value is now updated on every call to PDC_CHASSIS DUMP - Prevents fxe hang during a HPMC/TOC/panic dump (fixed in rev 4.5) LPMC - clean_icache_line will clean correct line of cache (fixed in rev 4.5) This update is equivalent to software patch PHSS_22573 for HPUX 10.20 and PHSS_22574 for HPUX 11.00. SR: None DTS: None HWDep: HP 9000 Model B1000, B2000, C3X00, J5X00, J6000, J7000 Supers: PF_CBCJ0019 PF_CBCJ0023 PF_CBCJ0031 PF_CBCJ0032 PF_CBCJ0034 PF_CBCJ0035 PF_CBCJ0040 PF_CBCJ0045 Owner: 40RG/SDT firmware_patches/hp/cpu/PF_CBCJ0048 :B[12]000:C3X00:J[567]X00:firmware:4.8: 1Liner: HP 9000 Model B[12]000/C3X00/J[567]X00 firmware 4.8 patch CDate: 00/12/06 PDate: 00/12/12 Desc: PCI - to fix a possible data integrity problem between PCI and the I/O controller, PCI slot 1 is being limited to operate at a maximum data transfer rate of 256MB/sec on J6000s. No other system is affected. This update is equivalent to software patch PHSS_22900 for HPUX 10.20 and PHSS_22901 for HPUX 11.00. SR: None DTS: None HWDep: HP 9000 Model B1000, B2000, C3X00, J5X00, J6000, J7000 Supers: PF_CBCJ0019 PF_CBCJ0023 PF_CBCJ0031 PF_CBCJ0032 PF_CBCJ0034 PF_CBCJ0035 PF_CBCJ0040 PF_CBCJ0045 PF_CBCJ0046 Owner: 40RG/SDT firmware_patches/hp/cpu/PF_CBHK3752 :Kx70:K370:K570:37.52: 1Liner: HP 9000 Kx70 Firmware revision 37.52 CDate: 98/02/19 PDate: 98/03/02 Desc: - New Firmware is required to provide support for the following new products and/or features: - Boot/Dump support for A3629A (9GB) disks (also requires HP-UX 11.0) - A3699A HP-PB Bus Converter - A1828A HP-PB Expansion Module (boot supported) - This revision of Firmware also includes the following fixes and enhancements: - HPMC caused by incorrect refresh rate for A3483A 256MB Memory Module (128MB DIMM) SR: None DTS: None HWDep: HP9000 Model K370/K570 Supers: None Owner: 5260/STD firmware_patches/hp/cpu/PF_CBHK3816 :Kx70:Kx80:Firmware 38.16:Fibre:Channel: 1Liner: HP9000 Kx70 and Kx80 Firmware revision 38.16 CDate: 98/05/08 PDate: 98/05/26 Desc: HP9000 Kx70 and Kx80 server firmware revision 38.16 to provide Fibre Channel boot. SR: None DTS: None HWDep: For HP9000 K370,K570,K380 and K580 servers only. Supers: PF_CBHK3752 Owner: 5260/STD firmware_patches/hp/cpu/PF_CBHK3830 :K370:K380:K570:K580:Firmware:38.30: 1Liner: HP9000 K370, K570, K380 & K580 Firmware revision 38.30 CDate: 98/07/22 PDate: 98/09/21 Desc: - Page deallocation table (PDT) entries will be generated for HPMC's caused by multi bit memory errors. - Transfer of control (TOC) does not corrupt the OS TOC Vector when PDC_SYSTEM_INFO option 1 or 4 is called. SR: None DTS: None HWDep: HP9000 K370/K570 and K380/K580 only Supers: PF_CBHK3752 PF_CBHK3816 Owner: 5260/STD firmware_patches/hp/cpu/PF_CBHK3911 :Kx70:Kx80:firmware:39.11: 1Liner: HP9000 Kx70/Kx80 & HP3000 989KS server firmware revision 39.11 CDate: 99/03/17 PDate: 99/03/22 Desc: - Freezes CPU Drive Strength value during boot. - Fixes incorrect warning messages when PDCINFO is run on a 11.xx HP-UX system. - Does not delete the PDC LANID when the EEPROM is cleared. - Fixes the HP-PB I/O bus converter/card cage problem when a PSI card is used. When PDCINFO gets called from the OS by Predictive Support, and a PSI is plugged into the HP-PB external card cage, HP-UX does not fail with a flt anymore. - Systems with Service-Guard configurations can now run PDCINFO using Predictive support without failure. The PDC procedure "PDC_SYSTEM_INFO" is now cached in memory, which significantly improves the speed at which PDCINFO will execute, thus preventing the problems associated with Service-Guard. - Provides support for HP-UX boot time improvement, which allows the OS to set PDC selftest parameters for the next boot. This feature is not currently supported by the OS. SR: None DTS: None HWDep: For HP9000 Kx70/Kx80, and HP3000 989KS only Supers: PF_CBHK3752 PF_CBHK3816 PF_CBHK3830 Owner: 5260/STD firmware_patches/hp/cpu/PF_CBHK3943 :Kx70:Kx80:989KS:firmware:39.43: 1Liner: HP9000 Kx70/Kx80 & HP3000 989KS firmware revision 39.43 CDate: 00/04/15 PDate: 00/05/23 Desc: - System hangs for varying duration of time that can not be interrupted by TOC. - System clock (software maintained) loses time. The time loss occurs randomly and may result in large losses over a relatively short time period. SR: None DTS: None HWDep: For HP9000 K370, K380, K570, K580 and HP3000 989KS/x00 and 989KS/x50 only Supers: PF_CBHK3752 PF_CBHK3816 PF_CBHK3830 PF_CBHK3911 Owner: 5260/STD firmware_patches/hp/cpu/PF_CC110013 :C110:firmware:1.3: 1Liner: HP 9000 Model C110 revision 1.3 firmware patch CDate: 96/04/05 PDate: 98/04/18 Desc: switch real time clock source to LASI controller rather than U2 SR: None DTS: None HWDep: HP 9000 Model C110 Supers: None Owner: 40RG/SDT firmware_patches/hp/cpu/PF_CC180027 :C160:C180:2.7: 1Liner: HP 9000 Models C160 and C180 revision 2.7 firmware patch CDate: 97/02/24 PDate: 97/03/12 Desc: - sets tag queue depth to 8 in RDR 11/27 - HPA of built in graphics changed from 0xF8000000 to 0xFA000000 - adds enhanced PCI error reporting - moves keyboard IODC code to 0x200000 - cycles through monitor types if monitor type is set to 0 - faster selftest that skips some tests if FASTBOOT is ON - implements new chassis codes of form C2DX to list which logical memory bank is being tested - supports DOME/MEGATECH graphics card - PDC SYS_INFO enabled - new configuration option with AUTO START * ACCESS Port not supported until next revision * ODE Mapper does not display installed memory. ODE MEMTEST correctly MAPs installed memory. * After updating to this rev of 2.7, the next firmware update requires using a serial port as console due to a 2.7 interaction with the keyboard IODC such that loading the firmware will hang before the second checksum. SR: None DTS: None HWDep: HP 9000 Model C180/C160 Supers: None Owner: 40RG/SDT firmware_patches/hp/cpu/PF_CC180043 :C160:C180:C200:4.3: 1Liner: HP 9000 Models C160/C180/C200 revision 4.3 firmware patch CDate: 97/06/30 PDate: 97/07/17 Desc: - Supports boot from built-in PCI SCSI on C200 - Supports boot from built-in PCI LAN on C200 - Supports C200 385W and 550W backplanes - Changes SCSI and FWSCSI IODC header IODC_FEATURES bytes to indicate block I/O command support and enable HP-UX core dumps to disks of sizes greater than 4G - Prints a special BCH message for the auto scan for a monitor type if monitor type set to 0 - Implements the LanConfig command in the BCH COnfig menu - ACCESS Port support reenabled - Uses ISL version A.00.38 (3250) in the UPDATE LIF volume to support 2GB and greater memory sizes - Sets the WOR register to 8 for enhanced graphics performance - ODE Mapper displays installed memory again * If updating from rev 2.7, this rev 4.3 firmware update requires using serial port 1 and a terminal as console due to a 2.7 interaction with the keyboard IODC such that loading the firmware will hang before the second checksum and the graphics console will lock. SR: None DTS: None HWDep: HP 9000 Model C180/C160/C200 Supers: PF_CC180027 Owner: 40RG/SDT firmware_patches/hp/cpu/PF_CC180050 :C160:C180:C200:5.0: 1Liner: HP 9000 Models C160/C180/C200 revision 5.0 firmware patch CDate: 97/09/22 PDate: 97/10/28 Desc: - scans for PCI cards usage on old backplanes and halts system if condition is found. HP will replace backplane with newer version that supports PCI cards - improves LAN functionality on AUI - allow fwscsi initiator ID settings for 8-15 - pre-enable 3rd party graphics cards - implements chassis codes to on or off to serial port 1 in the BCH service menu - allow disk dumps to Quantum 32150WD disks - enables support of new Ultra SCSI and 100BT Lan on C200 - enables support of 512MB SIMMS * Requires using a serial port as console if updating from firmware revision 2.7 rather than graphics console. SR: None DTS: None HWDep: HP 9000 Model C180/C160/C200 Supers: PF_CC180027 PF_CC180043 Owner: 40RG/SDT firmware_patches/hp/cpu/PF_CC1X0012 :C-Class:C100:C110: 1Liner: HP 9000 Models C100 and C110 revision 1.2 firmware patch CDate: 96/03/15 PDate: 96/03/27 Desc: -addition of Secure Mode boot, -addition of support for new memory option (A4209A, 64MB pair) -fixes LAN IODC system hang when booting on a loaded LAN SR: None DTS: None HWDep: HP 9000 Model C100/C110 Supers: None Owner: 40RG/SDT firmware_patches/hp/cpu/PF_CC2X0051 :C160:C180:C200:C240:firmware:5.1: 1Liner: HP 9000 Models C160/C180/C200/C240 revision 5.1 firmware CDate: 98/02/05 PDate: 98/03/03 Desc: -Split rom image to allow stable use of older AMD proms (problem with last electrical row in AM29F040) and avoid selftest failure 3000 -Improve patch_init so that the STI rom in older GSC visualize graphics cards including A4070B, A4071B, A4244A, A4441A, A4442A, A4455A, A4450A, and A4246A will be automatically updated -Allow non-console graphics initialization to be skipped Note *** If updating from rev 2.7, this rev 5.1 firmware update requires using serial port 1 and a terminal as console due to a 2.7 interaction with the keyboard IODC such that loading the firmware will hang before the second checksum and the graphics console will lock. SR: None DTS: None HWDep: HP 9000 Model C160/C180/C200/C240 Supers: PF_CC180027 PF_CC180043 PF_CC180050 Owner: 40RG/SDT firmware_patches/hp/cpu/PF_CC2X0052 :C160:C180:C200:C240:firmware:5.2: 1Liner: HP 9000 Models C160/C180/C200/C240 revision 5.2 firmware CDate: 98/03/24 PDate: 98/03/30 Desc: - resolves TOC hang with a graphics console - supports PCI Visualize EG graphics card (Dome support dropped) - send chassis code before reboot - resolves a soft boot error - improves boot time - allow configurable PCI delay for slower PCI cards Note *** If updating from rev 2.7, this rev 5.2 firmware update requires using serial port 1 and a terminal as console due to a 2.7 interaction with the keyboard IODC such that loading the firmware will hang before the second checksum and the graphics console will lock. SR: None DTS: None HWDep: HP 9000 Model C160/C180/C200/C240 Supers: PF_CC180027 PF_CC180043 PF_CC180050 PF_CC2X0051 Owner: 40RG/SDT firmware_patches/hp/cpu/PF_CC2X0058 :C160:C180:C200:C240:firmware:5.8: 1Liner: HP 9000 Models C160/C180/C200/C240 revision 5.8 firmware CDate: 98/09/01 PDate: 98/09/03 Desc: - no longer check LAN ID prefixes - initialize PCI Bridge controller interrupts during soft boot - improve PCI delay handling - PDC_SYSTEM_INFO no longer corrupts TOC vector - restores cr27 and cr28 correctly after a PDC call - PCX-U internal bus drive value is read and locked just before loading ISL. - enables the use of 4 PCI graphics cards - added PciDelay command to the BCH service menu Note *** If updating from rev 2.7, this rev 5.8 firmware update requires using serial port 1 and a terminal as console due to a 2.7 interaction with the keyboard IODC such that loading the firmware will hang before the second checksum and the graphics console will lock. SR: None DTS: None HWDep: HP 9000 Model C160/C180/C200/C240 Supers: PF_CC180027 PF_CC180043 PF_CC180050 PF_CC2X0051 PF_CC2X0052 Owner: 40RG/SDT firmware_patches/hp/cpu/PF_CC2X0060 :C160:C180:C200:C240:firmware:6.0: 1Liner: HP 9000 Models C160/C180/C200/C240 revision 6.0 firmware CDate: 98/10/09 PDate: 98/10/14 Desc: - supports new LAN controller chipsets - improved locking of a PCX-U internal bus drive value to prevent a cause of system halts Note *** If updating from rev 2.7, this rev 6.0 firmware update requires using serial port 1 and a terminal as console due to a 2.7 interaction with the keyboard IODC such that loading the firmware will hang before the second checksum and the graphics console will lock. SR: None DTS: None HWDep: HP 9000 Model C160/C180/C200/C240 Supers: PF_CC180027 PF_CC180043 PF_CC180050 PF_CC2X0051 PF_CC2X0052 PF_CC2X0058 Owner: 40RG/SDT firmware_patches/hp/cpu/PF_CC2X0061 :C160:C180:C200:C240:firmware:6.1: 1Liner: HP 9000 Models C160/C180/C200/C240 revision 6.1 firmware CDate: 99/01/15 PDate: 99/02/08 Desc: - fixes LAN timeout problem when the BCH lan search command is used - the BCH search LAN command now allows the number of retries to be set to specific values. Two different types can be controlled: the number of retries while searching for a server and the number of retries during an IO transfer. These values are set by specifying a LAN IP (all zeros means search for any available server) followed by the search retry number and the IO retry number. Example: sea lan.0.0.0.0.5.100 specifies a search for any available server retrying search packets 5 times and IO packets 100 times. - firmware updates will now keep the current EEPROM settings for boot paths and configurations rather than resetting them to defaults. - a "-5 returned by LAN entry init" is now only displayed if a specific "search lan" is used vs a general "search". A message suggesting that a LAN cable may be missing or not connected will be displayed also. Note *** If updating from rev 2.7, this rev 6.1 firmware update requires using serial port 1 and a terminal as console due to a 2.7 interaction with the keyboard IODC such that loading the firmware will hang before the second checksum and the graphics console will lock. SR: None DTS: None HWDep: HP 9000 Model C160/C180/C200/C240 Supers: PF_CC180027 PF_CC180043 PF_CC180050 PF_CC2X0051 PF_CC2X0052 PF_CC2X0058 PF_CC2X0060 Owner: 40RG/SDT firmware_patches/hp/cpu/PF_CC2X0062 :C160:C180:C200:C240:firmware:6.2: 1Liner: HP 9000 Models C160/C180/C200/C240 revision 6.2 firmware CDate: 00/04/11 PDate: 00/04/12 Desc: - reset the core LAN to prevent hangs during reboot and shutdowns Note *** If updating from rev 2.7, this rev 6.2 firmware update requires using serial port 1 and a terminal as console due to a 2.7 interaction with the keyboard IODC such that loading the firmware will hang before the second checksum and the graphics console will lock. SR: None DTS: None HWDep: HP 9000 Model C160/C180/C200/C240 Supers: PF_CC180027 PF_CC180043 PF_CC180050 PF_CC2X0051 PF_CC2X0052 PF_CC2X0058 PF_CC2X0060 PF_CC2X0061 Owner: 40RG/SDT firmware_patches/hp/cpu/PF_CC2X0063 :C160:C180:C200:C240:firmware:6.3: 1Liner: HP 9000 Models C160/C180/C200/C240 revision 6.3 firmware CDate: 00/06/21 PDate: 00/07/19 Desc: - reset PCI Lan cards to prevent hangs during reboot and HPUX shutdowns Note *** If updating from rev 2.7, this rev 6.3 firmware update requires using serial port 1 and a terminal as console due to a 2.7 interaction with the keyboard IODC such that loading the firmware will hang before the second checksum and the graphics console will lock. SR: None DTS: None HWDep: HP 9000 Model C160/C180/C200/C240 Supers: PF_CC180027 PF_CC180043 PF_CC180050 PF_CC2X0051 PF_CC2X0052 PF_CC2X0058 PF_CC2X0060 PF_CC2X0061 PF_CC2X0062 Owner: 40RG/SDT firmware_patches/hp/cpu/PF_CC360011 :C360:1.1:PA8500: 1Liner: HP 9000 Model C360 revision 1.1 firmware patch CDate: 98/12/03 PDate: 98/12/14 Desc: supports C360 with PA8500 processor SR: None DTS: None HWDep: HP 9000 Model C360 Supers: None Owner: 40RG/SDT firmware_patches/hp/cpu/PF_CC360012 :C360:1.2: 1Liner: HP 9000 Model C360 revision 1.2 firmware patch CDate: 99/04/28 PDate: 99/05/07 Desc: - fixes LAN timeout problem when the BCH lan search command is used - the BCH search LAN command now allows the number of retries to be set to specific values. - firmware updates will now keep the current EEPROM settings for boot paths and configurations rather than resetting them to defaults. - a "-5 returned by LAN entry init" is now only displayed if a specific "search lan" is used vs a general "search". A message suggesting that a LAN cable may be missing or not connected will be displayed also. - the clock speed selftest works properly. - additional cache selftests were added. - PDC_RDR now clears the return buffer before reading the rdr value. SR: None DTS: None HWDep: HP 9000 Model C360 Supers: PF_CC360011 Owner: 40RG/SDT firmware_patches/hp/cpu/PF_CC360013 :C360:1.3: 1Liner: HP 9000 Model C360 revision 1.3 firmware patch CDate: 99/12/31 PDate: 00/01/28 Desc: - TOC works with 64bit HPUX SR: None DTS: None HWDep: HP 9000 Model C360 Supers: PF_CC360011 PF_CC360012 Owner: 40RG/SDT firmware_patches/hp/cpu/PF_CC360014 :C360:1.4: 1Liner: HP 9000 Model C360 revision 1.4 firmware patch CDate: 00/03/28 PDate: 00/04/11 Desc: - reset the core LAN to prevent hangs during reboot and shutdowns SR: None DTS: None HWDep: HP 9000 Model C360 Supers: PF_CC360011 PF_CC360012 PF_CC360013 Owner: 40RG/SDT firmware_patches/hp/cpu/PF_CC360015 :C360:1.5: 1Liner: HP 9000 Model C360 revision 1.5 firmware patch CDate: 00/07/10 PDate: 00/07/19 Desc: - reset active PCI LAN cards to prevent hangs and and HPMC's during HPUX reboots and shutdowns SR: None DTS: None HWDep: HP 9000 Model C360 Supers: PF_CC360011 PF_CC360012 PF_CC360013 PF_CC360014 Owner: 40RG/SDT firmware_patches/hp/cpu/PF_CJ224012 :J2240:1.2:error:code:3000:3001: 1Liner: HP 9000 Model J2240 firmware 1.2 patch CDate: 98/03/05 PDate: 98/03/11 Desc: -correct a flash ROM checksum error that can causes intermittant system halts with error codes of 3000 or 3001 -reset the RS232 port in a bus controller during a bus walk SR: None DTS: None HWDep: HP 9000 Model J2240 Supers: None Owner: 40RG/SDT firmware_patches/hp/cpu/PF_CJ224017 :J2240:firmware:1.7: 1Liner: HP 9000 Model J2240 firmware 1.7 patch CDate: 98/09/16 PDate: 98/09/21 Desc: - no longer check LAN ID prefixes during ss_update - properly restore cr27 and cr28 after PDC calls - PDC_SYSTEM_INFO no longer corrupts TOC vector - added PciDelay command to the service menu - faster early data cache initialization - faster PDC ROM checksum - Processor Voltage Temperature value is locked down to prevent a intermittant hang which doesn't respond to TOC - enable PCI Visualize EG graphics card - improve boot time - improve soft boot initialization - repair TOC hang with graphics console - fix IO bridge controller RS232 initialization SR: None DTS: None HWDep: HP 9000 Model J2240 Supers: PF_CJ224012 Owner: 40RG/SDT firmware_patches/hp/cpu/PF_CJ224019 :J2240:firmware:1.9: 1Liner: HP 9000 Model J2240 firmware 1.9 patch CDate: 98/10/12 PDate: 98/10/14 Desc: - supports new LAN controller chipsets - improved locking of a PCX-U internal bus drive value to prevent a cause of system halts SR: None DTS: None HWDep: HP 9000 Model J2240 Supers: PF_CJ224012 PF_CJ224017 Owner: 40RG/SDT firmware_patches/hp/cpu/PF_CJ224020 :J2240:2.0:firmware:BCH:lan:search: 1Liner: HP 9000 Model J2240 firmware 2.0 patch CDate: 99/01/20 PDate: 99/01/22 Desc: -fixes LAN timeout problem when the BCH lan search command is used -the BCH search LAN command now allows the number of retries to be set to specific values. Two different types can be controlled: the number of retries while searching for a server and the number of retries during an IO transfer. These values are set by specifying a LAN IP (all zeros means search for any available server) followed by the search retry number and the IO retry number. Example: sea lan.0.0.0.0.5.100 specifies a search for any available server retrying search packets 5 times and IO packets 100 times. -firmware updates will now keep the current EEPROM settings for boot paths and configurations rather than resetting them to defaults. -a "-5 returned by LAN entry init" is now only displayed if a specific "search lan" is used vs a general "search". A message suggesting that a LAN cable may be missing or not connected will be displayed also. SR: None DTS: None HWDep: HP 9000 Model J2240 Supers: PF_CJ224012 PF_CJ224017 PF_CJ224019 Owner: 40RG/SDT firmware_patches/hp/cpu/PF_CJ224021 :J2240:2.1:firmware:BCH:lan:search: 1Liner: HP 9000 Model J2240 firmware 2.1 patch CDate: 00/10/06 PDate: 00/10/12 Desc: - reset PCI LAN cards to prevent hangs or hpmc's during reboot and HPUX shutdowns SR: None DTS: None HWDep: HP 9000 Model J2240 Supers: PF_CJ224012 PF_CJ224017 PF_CJ224019 PF_CJ224020 Owner: 40RG/SDT firmware_patches/hp/cpu/PF_CJ28X022 :J280:J282:2.2: 1Liner: HP 9000 Model J280/J282 revision 2.2 firmware patch CDate: 98/01/15 PDate: 98/01/30 Desc: -correct a flash ROM checksum error that causes intermittant system halts with error codes of 3000 or 3001 -adds support for the ScRoll command in BCH service menu SR: None HWDep: HP 9000 Model J280 J282 Supers: None Owner: 40RG/SDT firmware_patches/hp/cpu/PF_CJ28X024 :J280:J282:firmware:2.4: 1Liner: HP 9000 Model J280/J282 revision 2.4 firmware patch CDate: 98/09/16 PDate: 98/09/21 Desc: PVT locked down (Processor internal bus drive value is read and locked just before loading ISL.) to prevent a intermittant system hang which doesn't respond to TOC SR: None DTS: None HWDep: HP 9000 Model J280/J282 Supers: PF_CJ28X022 Owner: 40RG/SDT firmware_patches/hp/cpu/PF_CJ2X0020 :J200:J210:J210XC:2.0: 1Liner: HP 9000 Model J2X0 revision 2.0 firmware patch CDate: 98/01/15 PDate: 98/01/30 Desc: correct a flash ROM checksum error that causes intermittant system halts with error codes of 3000 or 3001 SR: None HWDep: HP 9000 Model J200 J210 J210XC Supers: PF_CJ200018 PF_CJ2X0019 Owner: 40RG/SDT firmware_patches/hp/cpu/PF_CKHK0020 :firmware:PDC:2.0: 1Liner: HP 9000 K Class PDC Revision 2.0 CDate: 95/10/06 PDate: 95/10/11 Desc: This patch is a PDC firmware update for the HP9000 Models K1x0/K2x0/K4x0, and the HP3000 9X9KS systems. SR: None DTS: None HWDep: HP9000 K1x0/K2x0/K4x0 and HP3000 9X9KS only Supers: None Owner: 5260/STD firmware_patches/hp/cpu/PF_CKHK0021 :firmware:PDC 2.1: 1Liner: HP 9000 K Class PDC Revision 2.1 CDate: 96/02/01 PDate: 96/02/01 Desc: This patch is a PDC firmware update for the HP9000 Models K1x0/K2x0/K4x0, and the HP3000 9X9KS systems. SR: None DTS: None HWDep: HP9000 K1x0/K2x0/K4x0 and HP3000 9X9KS only Supers: PF_CKHK0020 Owner: 5260/STD firmware_patches/hp/cpu/PF_CKHK0022 :firmware:PDC 2.2: 1Liner: HP 9000 K Class PDC Revision 2.2 CDate: 96/06/01 PDate: 96/06/06 Desc: This patch is a PDC firmware update for the HP9000 Models K1x0/K2x0/K4x0, and the HP3000 9X9KS systems. Desc: - Adds support of 256MB Memory Modules - Adds support of 64MB Memory Modules - Fixes spurious character on display panel SR: None DTS: None HWDep: HP9000 K1x0/K2x0/K4x0 and HP3000 9X9KS only Supers: PF_CKHK0020 PF_CKHK0021 Owner: 5260/STD firmware_patches/hp/cpu/PF_CKHK0024 :Kx00:Kx10:Kx20:939:959:969:2.4: 1Liner: HP 9000 Kx00/Kx10/Kx20 & HP 3000 939/959/969 Firmware 2.4 CDate: 98/01/30 PDate: 98/02/03 Desc: Provides support for the following: - Boot/Dump support for A3629A (9GB) disks (Requires HP-UX 11.0) - A3699A HP-PB Bus Converter - A1828A HP-PB Expansion Module (boot supported) - A3737A 512MB Memory Module (256MB DIMM) - Increase Boot Timer from 200s to 2100 seconds SR: None DTS: None HWDep: HP9000 Kx00/Kx10/Kx20 and HP3000 Model 939/959/969 Supers: PF_CKHK0020 PF_CKHK0021 PF_CKHK0022 Owner: 5260/STD firmware_patches/hp/cpu/PF_CKHK0028 ::K200:K400:Kx10:Kx20:2.8:Fibre:Channel: 1Liner: HP 9000 K200, K400, Kx10 & Kx20 Firmware revision 2.8 CDate: 98/05/08 PDate: 98/05/26 Desc: HP9000 K200, K400, Kx10 and Kx20 server firmware revision 2.8 to provide Fibre Channel boot. SR: None DTS: None HWDep: HP9000 K200, K400, Kx10 and Kx20 servers only. Supers: PF_CKHK0020 PF_CKHK0021 PF_CKHK0022 PF_CKHK0024 Owner: 5260/STD firmware_patches/hp/cpu/PF_CKHK0029 :firmware:PDC 2.9: 1Liner: HP9000 K200, K400, Kx10 & Kx20 Firmware revision 2.9 CDate: 98/07/20 PDate: 98/07/23 Desc: - HP9000 Kx00/Kx10/Kx20 and HP3000 939KS/959KS/969KS firmware revision 2.9 to provide support for Fibre Channel boot. - Page deallocation table (PDT) entries will be generated for HPMC's caused by multi bit memory errors. - Transfer of control (TOC) does not corrupt the OS TOC Vector when PDC_SYSTEM_INFO option 4 is called. SR: None DTS: None HWDep: For HP9000 Kx00, Kx10 and Kx20 servers only Supers: PF_CKHK0020 PF_CKHK0021 PF_CKHK0022 PF_CKHK0024 PF_CKHK0028 Owner: 5260/STD firmware_patches/hp/cpu/PF_CMHK3801 :Kx50:Kx60:979:revision:38.01: 1Liner: HP9000 Kx50/Kx60 & HP3000 979 Firmware revision 38.01 CDate: 98/02/06 PDate: 98/02/09 Desc: - This patch is a Firmware update for the following systems ONLY: - HP9000 Model K250 K260 K260-EG K450 K460 K460-EG K460-XP - HP3000 Model 979KS/100/200/300/400 - New Firmware is required to provide support for the following new products and/or features: - Boot/Dump support for A3629A (9GB) disks (also requires HP-UX 11.0) - A3699A HP-PB Bus Converter - A1828A HP-PB Expansion Module (boot supported) - 64-Bit support for HP-UX 11.0 - A3737A 512MB Memory Module (256MB DIMM) - This revision of Firmware also includes the following fixes and enhancements: - HPMC caused by incorrect refresh rate for A3483A 256MB Memory Module (128MB DIMM) - Allows graphics card selection for console when multiple graphics cards are installed. - Fixes Slave processors becoming deconfigured following TOC SR: None DTS: None HWDep: HP9000 Kx50/Kx60 and HP3000 979 systems only Supers: PF_CMHK3651 Owner: 5260/STD firmware_patches/hp/cpu/PF_CMHK3829 :Kx50:Kx60:979:revision:38.29: 1Liner: HP9000 Kx50/Kx60 & HP3000 979 Firmware revision 38.29 CDate: 98/08/24 Desc: HP9000 Kx50/Kx60 and HP3000 979KS firmware revision 38.29 to provide Fibre Channel boot. SR: None DTS: None HWDep: HP9000 Kx50/Kx60 and HP3000 979 systems only Supers: PF_CMHK3651 PF_CMHK3801 Owner: 5260/STD firmware_patches/hp/cpu/PF_CMHK3912 :Kx50:Kx60:firmware:39.12: 1Liner: HP9000 Kx50/Kx60 and HP3000 979KS firmware revision 39.12 CDate: 99/03/17 PDate: 99/03/22 Desc: - Freezes CPU Drive Strength value during boot. - Fixes incorrect warning messages when PDCINFO is run on a 11.xx HP-UX system. - Does not delete the PDC LANID when the EEPROM is cleared. - Fixes the HP-PB I/O bus converter/card cage problem when a PSI card is used. When PDCINFO gets called from the OS by Predictive Support, and a PSI is plugged into the HP-PB external card cage, HP-UX does not fail with a flt anymore. - Systems with Service-Guard configurations can now run PDCINFO using Predictive support without failure. The PDC procedure "PDC_SYSTEM_INFO" is now cached in memory, which significantly improves the speed at which PDCINFO will execute, thus preventing the problems associated with Service-Guard. - Provides support for HP-UX boot time improvement, which allows the OS to set PDC selftest parameters for the next boot. This feature is not currently supported by the OS. SR: None DTS: None HWDep: For HP9000 Kx50/Kx60 and all HP3000 979KS only. Supers: PF_CMHK3651 PF_CMHK3801 PF_CMHK3829 Owner: 5260/STD firmware_patches/hp/cpu/PF_CMHK3943 :Kx50:Kx60:979KS:firmware:39.43: 1Liner: HP9000 Kx50/Kx60 and HP3000 979KS firmware revision 39.43 CDate: 00/04/15 PDate: 00/05/23 Repost: 00/10/26 The patch documentation was updated to clarify that the firmware does apply to the K360 systems. The firmware image was not changed, only the documentation was modified. Desc: - System hangs for varying duration of time that can not be interrupted by TOC. - System clock (software maintained) loses time. The time loss occurs randomly and may result in large losses over a relatively short time period. SR: None DTS: None HWDep: For HP9000 Models K250, K260, K260-EG, K360, K450, K460, K460-EG, K460-XP and HP3000 979KS/x00 only. Supers: PF_CMHK3651 PF_CMHK3801 PF_CMHK3829 PF_CMHK3912 Owner: 5260/STD firmware_patches/hp/cpu/PF_CPDC2500 :V2500:1.0:1.1::initiator:ATM:FP_EN: 1Liner: HP V2500 Test Station SW Patch Date: 99/05/20 Desc: - This set of V-Class boot firmware is the same set that is part of the V2500 test station software version 1.1 release. This patch is provided for customers who want the bug fixes without having to reinstall all of the test station software. - SCSI initiator ids are no longer forced to be 7 by OBP. - OBP has an increased amount of heap space. - Fore ATM fcode is disabled by OBP. - PCX-W "Fast path enable mode" is disabled by OBP. - OBP dumps pim-info after encountering a firmware error. - OBP workaround implemented to prevent logging of hard errors after runnning EST. - Pcirom.fth has been updated to support Symbios cards with ROM type 2002. SR: None DTS: None HWDep: V2500 SWDep: 2500 V-Class Test Station SW V1.0 Supers: None Owner: S300/CXD firmware_patches/hp/cpu/PF_CPRW3941 :N4000:firmware:39.41: 1Liner: HP9000 Model N4000 Firmware revision 39.41 (Version 203) CDate: 99/10/27 PDate: 99/10/29 Desc: - Provides enhancements needed for future hardware. - Improved soft reset routine. - Enforces CPU loading order 1,3,5,7,0,2,4,6 - Ensures all CPUs are in the same cache configuration - Limits boot from tape retries to 10 - Fix firmware shutdown process to prevent HPMC on shutdown - Preserves SCSI info after a firmware update (from 39.25 only) - Ensures system has reached a quiescent state prior to starting firmware HPMC handler to enable proper reporting of the cause of the failure - Fixed warning bits not being cleared on reset - All single bit errors are now resolved to the specific DIMM - Check for invalid console path to prevent user from selecting the GSP internal path SR: None DTS: None HWDep: For HP9000 N4000 systems only. Supers: None Owner: 5260/STD firmware_patches/hp/cpu/PF_CPRW3946 :N4000:firmware:39.46: 1Liner: HP9000 Model N4000 Firmware revision 39.46 (Version 204) CDate: 99/12/06 PDate: 99/12/10 Desc: - PDC_SYSTEM_INFO is overflowing its stack space, may cause HPMC. - Register gr2 is incorrect on CPUs 3-7 during LPMC. - "Ser scsi" commands do not accept paths with PCI to PCI bridges. SR: None DTS: None HWDep: For HP9000 N4000 systems only Supers: PF_CPRW3941 Owner: 5260/STD firmware_patches/hp/cpu/PF_CPRW4025 :N4000:firmware:40.25: 1Liner: HP9000 Model N4000 Firmware revision 40.25 (Version 213) CDate: 00/06/10 PDate: 00/07/24 Desc: - The speed detection section of PDC did not detect a 360/440 MHz processor when installed into a 550 MHz system. This enabled the chance of installing a slow speed processor in a high-speed system. PDC now detects this condition, issues a warning message and prevents HP-UX from booting. - PDC now supports boot via the A5158A (PCI 2x Fiber Channel) family of I/O cards. SR: None DTS: None HWDep: For HP9000 N4000 systems only Supers: PF_CPRW3941 PF_CPRW3946 Owner: 5260/STD firmware_patches/hp/cpu/PF_CRHW3946 :L1000:L2000:firmware:39.46: 1Liner: HP 9000 Model L1000 & L2000 Firmware revision 39.46 CDate: 99/12/16 PDate: 99/12/21 Desc: Firmware revision 39.46 adds the following: - Features/Enhancements 1) Provides support for L1000 servers 2) Server firmware command "in pr" now displays model string - Fixes 1) Memory Page Deallocation Table (PDT) can be incorrectly reported as full 2) Console can be changed to invalid path without recovery possible 3) Server firmware command "in all" from does not include "in cr" data 4) Fatal loading order of memory DIMMs causes HPMC during selftest 5) HPMC upon boot from A5506A or A5150A following server firmware "search" 6) PDC_SYSTEM_INFO stack overflow may cause HPMC 7) Changing processor model or speed may not update model string SR: None DTS: None HWDep: For HP9000 L1000 & L2000 systems only. Supers: None Owner: 40RG/SDT firmware_patches/hp/cpu/PF_CRHW4019 :L1000:L2000:firmware:40.19: 1Liner: HP 9000 Model L1000 & L2000 Firmware revision 40.19 CDate: 00/06/09 PDate: 00/06/15 Desc: Firmware revision 40.19 adds the following: - Systems with server firmware revision 40.14 may experience a system panic or system hang in response to the HP-UX command "shutdown -h" . SR: None DTS: None HWDep: For HP9000 L1000 & L2000 systems only. Supers: PF_CRHW3946 Owner: 40RG/SDT firmware_patches/hp/cpu/PF_CRHW4026 :L1000:L2000:firmware:40.26: 1Liner: HP 9000 Model L1000 & L2000 Firmware revision 40.26 CDate: 00/07/21 PDate: 00/07/31 Desc: The following issue has been addressed and corrected with server firmware 40.26: 1. Server firmware revision 40.19 only recognizes A5191-60001 was a valid part number entry within FRU_ID of the system board. Any other value causes the following symptoms common to 360MHz and 440MHz CPUS: - Each CPU reports a 17D0 system alert during selftest. 17D0 indicates an "INVALID_SYS_BOARD_PART_NUM". - The following server firmware warning is generated: WARNING: Invalid processor clock chip setting. The following symptoms are unique to servers with 440MHz CPUs installed: - Server firmware identifies 440MHz CPUs as 360MHz CPUs. - The server model string will change from 9000/800/Lx000-44 to 9000/800/Lx000-36 (where x = 1 or 2). NOTE: The server hardware is actually running 440MHz. - The HP-UX clock gains approximately 15 minutes/hour. 2. An HPMC may occur as a result of performing a TOC (Transfer Of Control). SR: None DTS: None HWDep: For HP9000 L1000 & L2000 systems only. Supers: PF_CRHW3946 PF_CRHW4019 Owner: 40RG/SDT firmware_patches/hp/cpu/PF_CSTD3932 :A180:A180C:firmware:39.32: 1Liner: HP 9000 Model B1000/C3000/J5000/J7000 firmware 1.9 patch CDate: 99/10/27 PDate: 99/11/04 Desc: - HPMC caused by execution of FibreChannel PCI card selftest - LAN install of HP-UX 10.20 fails. SR: None DTS: None HWDep: For HP9000 A180/A180C systems only. Supers: None Owner: 40RG/SDT firmware_patches/hp/cpu/PF_CSXV1007 :SXV-Class:5.1.3:conserver: 1Liner: HP S/X/V2XXX conserver 5.1.3 teststation patch CDate: 99/09/27 PDate: 99/10/25 Repost: 99/12/13 The patch documentation was modified to reflect that the patch is applicable to V2500 systems, as well as S, X, and other V-Class systems. Desc: Conserver change to fix console malfunction. SR: None DTS: None HWDep: S/X or V-2XXX SWDep: Offline Test Station Diagnostics for S,X or V class systems Supers: None Owner: 47R1/RSN firmware_patches/hp/cpu/PF_CULD3740 :Dx20:Dx30:revision 37.40: 1Liner: HP 9000 Models Dx20/Dx30 firmware revision 37.40 CDate: 98/01/09 PDate: 98/01/12 Desc: - Provides support for 512MB memory module(4X memory). This module consists of two 256MB memory DIMMs. - Fixes selftest hang 'TEST 10A1' when the HP-UX "reboot" command is issued when an ATM (J2498A) card is active. - Model and number of processors displayed at bch upon power up and in response to bch 'in pr' command. SR: None DTS: None HWDep: HP 9000 Dx20/Dx30 Supers: None Owner: 5260/STD firmware_patches/hp/cpu/PF_CULD3846 :Dx20:Dx30:38.46: 1Liner: HP9000 Model Dx20/DX30 Firmware Revision 38.46 CDate: 99/02/02 PDate: 99/02/26 Desc: - Transfer of control (TOC) does not corrupt the OS TOC Vector when PDC_SYSTEM_INFO option 1 or 4 is called. - Support for a new LAN ID prefix 001083. - Support new IODC for 9Gb Disks. SR: None DTS: None HWDep: HP9000 Dx20/Dx30 Supers: PF_CULD3740 Owner: 5260/STD firmware_patches/hp/cpu/PF_CULL3843 :D210:D310:D200:38.43: 1Liner: HP9000 Dx10 Firmware revision 38.43 CDate: 99/02/01 PDate: 99/02/24 Desc: Fixes selftest failure 10D1 on HP9000 Dx10 systems when using 100bt interface card. SR: None DTS: None HWDep: HP9000 Dx10 Supers: PF_CULL3612 PF_CULL3634 firmware_patches/hp/cpu/PF_CULU3650 :Dx70:36.50: 1Liner: HP 9000 Model Dx70 firmware revision 36.50 CDate: 97/02/03 PDate: 97/02/19 Desc: Page Deallocation Table (PDT) entries at the Boot Console Handler (BCH) may display an incorrect memory module (SIMM pair). Revision 36.50 fixes this problem. SR: None DTS: None HWDep: HP 9000 Dx70 Supers: None Owner: 5260/STD firmware_patches/hp/cpu/PF_CULU3728 :Dx70:Dx80:37.28: 1Liner: HP 9000 Model Dx70/Dx80 firmware revision 37.28 CDate: 97/09/08 PDate: 97/09/10 Repost: 99/02/24 The patch documentation was modified to indicate that support for the D280 and D380 is provided in this firmware revision. The firmware has not changed, only the documentation. Desc: -Provides support for 512MB memory module(4X memory). This module consists of two 256MB memory DIMMs. -Provides support for D280 and D380 (Dx80) systems. SR: N/A DTS: None HWDep: HP 9000 Dx70/Dx80 Supers: PF_CULU3650 Owner: 5260/STD firmware_patches/hp/cpu/PF_CULU3840 :Dx70:Dx80:R380:firmware:38.40: 1Liner: HP 9000 Model Dx70/Dx80/R380 Firmware Revision 38.40 CDate: 98/10/09 PDate: 98/10/21 Repost: 99/02/08 PF_CULU3840 was re-released on 99/02/08. No changes were made to the CULU3840.frm file. Changes are limited to the CULU3840.text file. The changes to the documentation were to provide the steps necessary to backdate server firmware to revision 37.28 from revision 38.40 and to document support for the R380. Desc: - Supports boot from Fibre Channel. - Supports new LANID prefix. - Page deallocation table (PDT) entries will be generated for HPMC's caused by multi bit memory errors. - Transfer of control (TOC) does not corrupt the OS TOC Vector when PDC_SYSTEM_INFO option 1 or 4 is called. - EISA SE SCSI bus resets, timeouts, and hangs caused when multiple devices on a singe EISA card, or in mirrored disk environments have been fixed. - Intermittent Runway bus parity errors or timeouts has been fixed by changing the D/A converter drive strength parameters. - Provides support for R380 servers. SR: None DTS: None HWDep: HP9000 Dx70, Dx80, R380 only Supers: PF_CULU3650 PF_CULU3728 Owner: 5260/STD firmware_patches/hp/cpu/PF_CUPVTFIX :Kx50:Kx60:Kx70:Kx80:Drive:Strength: 1Liner: HP9000 Kx50, Kx60, Kx70, and Kx80 Drive Strength fix CDate: 98/11/13 PDate: 98/11/19 Desc: Corrects intermittent Runway Bus failures due to Runway drive drive strength miscalculation on HP9000 Kx50, Kx60, Kx70 and Kx80 Drive SR: None DTS: None Supers: None Owner: 5260/STD firmware_patches/hp/cpu/PF_CV220132 :V2200:1.3.2.2:32bit data corruption: 1Liner: HP V2200 revision 1.3.2 spp_pdc firmware patch CDate: 98/03/30 PDate: 98/04/18 Desc: Instead of failing silently pdc returns error for buffers >32bit SR: None DTS: None HWDep: V2200/V2250 SWDep: V-Class Test Station SW V4.2 Supers: None Owner: S300/CXD firmware_patches/hp/cpu/PF_CV220401 :V2200:4.0.1:Read-Hint: 1Liner: HP V2200 revision 4.0.1 firmware patch CDate: 97/12/15 PDate: 98/01/12 Desc: Added support for the Read-Hint feature. SR: None DTS: None HWDep: V2200 SWDep: Exemplar Diagnostic Version 4.0 Supers: None Owner: S300/CXD firmware_patches/hp/cpu/PF_CV220411 :V2200:X-Class:S-Class:4.1.1:firmware: 1Liner: HP V2200 revision 4.1.1 firmware patch CDate: 98/03/06 PDate: 98/03/25 Desc: Added support for post, cpu3000 and ccmd. SR: None DTS: None HWDep: V-Class, X-Class, S-Class systems SWDep: Exemplar Diagnostic Version 4.1 Supers: PF_CV220401 Owner: S300/RSN firmware_patches/hp/cpu/PF_CV220413 :V2200:V2250:4.3:5.2:HPMC:reboot: 1Liner: HP Test Station SW V5.2 Patch CDate: 00/04/13 PDate: 00/04/15 Desc: This patch repairs a defect in the OBP reboot code. On V22x0 systems, OBP temporarily places a copy of the PIM information stored in flash to main memory. OBP then updates PIM with any new information and then it writes it back to flash. OBP used a main memory address that was not located in the reserved firmware area and this has the potential to generate an HPMC during reboot. Since this happens near the end of reboot, this problem will not jeopardize system integrity since HP-UX has already completed the shutdown process. SR: None DTS: None HWDep: V2200/V2250 SWDep: 2200/2250 V-Class Test Station SW V5.2 Supers: None Owner: S300/RSN (sashi@rsn.hp.com) firmware_patches/hp/cpu/PF_CV220421 :SPP2XXX:4.2.1:POST:A/D converter:PCXU+: 1Liner: HP SPP2XXX revision 4.2.1 firmware patch CDate: 98/05/6 PDate: 98/05/18 Desc: Post now locks Runway A to D converter for Rev 5.x PCXU+. SR: None DTS: None HWDep: SPP2XXX SWDep: Exemplar Diagnostic Version 4.1 or 4.2 Supers: None Owner: S300/RSN firmware_patches/hp/cpu/PF_CV220423 :V-Class:4.2.3:DFDUTIL:EST:OBP: 1Liner: HP V-Class revision 4.2.3 firmware patch CDate: 98/12/10 PDate: 99/01/06 Desc: Added support for DFDUTIL, EST, ENTRY.PDC, EXTRACTOR, and OBP. SR: None DTS: None HWDep: V-Class SWDep: Exemplar Diagnostic Version 4.2.1 Supers: PF_CV220422 Owner: 47S3/RSN firmware_patches/hp/cpu/PF_CV220431 :V-Class:4.3.1:DFDUTIL:EST:OBP: 1Liner: HP V-Class revision 4.3.1 firmware patch CDate: 98/09/14 PDate: 98/10/08 Desc: Added support for DFDUTIL, EST, ENTRY.PDC and OBP. SR: None DTS: None HWDep: V-Class SWDep: Exemplar Diagnostic Version 4.3 Supers: None Owner: 47S3/RSN firmware_patches/hp/cpu/PF_CV220432 :V-Class:4.3.2:DFDUTIL:EST:OBP: 1Liner: HP V-Class revision 4.3.2 firmware patch CDate: 98/12/16 PDate: 99/01/06 Desc: Added support for est, obp, entry.pdc, dfdutil, extractors, cpu_hang, install scripts, spp.pdc and pim_dumper. SR: None DTS: None HWDep: V-Class SWDep: Exemplar Diagnostic Version 4.3 Supers: PV_CV220431 Owner: 47S3/RSN firmware_patches/hp/cpu/PF_CV220511 :V-22XX:5.1.1:io3000.fw: 1Liner: HP V22XX revision 5.1.1 firmware patch CDate: 99/06/16 PDate: 99/07/13 Desc: Corrects intermittent failures in io3000 SR: None DTS: None HWDep: V22XX SWDep: Offline Diagnostic Version 5.1 Supers: None Owner: 47R1/RSN firmware_patches/hp/cpu/PF_CV220512 :V-Class:5.1.2:OBP, Hard_logger: 1Liner: HP V-22XX revision 5.1.2 firmware patch CDate: 99/08/31 PDate: 99/09/14 Repost: 99/10/05 Repost: 99/10/15 Repost: 99/10/26 Desc: Added support for OBP, ENTRY, HARD_LOGGER, and IO3000.FW. SR: None DTS: None HWDep: V-22XX SWDep: Offline Test Station Diagnostics Version 5.1 Supers: PF_CV220511 Owner: 47R1/RSN firmware_patches/hp/cpu/PF_CV220521 :V-22XX:5.2.1:pciromldr.fw: 1Liner: HP V22XX revision 5.2.1 firmware patch CDate: 00/04/27 PDate: 00/05/31 Desc: - Correction for pciromldr.fw hang during diag_version 5.2 install. - Enhanced fw_init - Enhanced opie, dfdutil, and tc_ioutil man pages SR: None DTS: None HWDep: V22XX SWDep: Offline TSSW Diagnostic Version 5.2 Supers: None Owner: 47R1/RSN firmware_patches/hp/cpu/PF_CV220522 :V22X0:5.2.2:pciromldr.fw:sppdsh: 1Liner: HP V22X0 TSSW Patch revision 5.2.2 CDate: 00/08/21 PDate: 00/08/28 Desc: - sppdsh now reduces the amount of unrelated errors printed when hard_logger is run. - pciromldr will now recognize symbios controllers with new rom chip CAT28F512. - Correction for pciromldr.fw hang during install. - Enhanced fw_init - Enhanced opie, dfdutil, and tc_ioutil man pages SR: None DTS: None HWDep: V22X0 SWDep: Offline TSSW Diagnostic Version 5.2 or 5.2.1 Supers: PF_CV220726 Owner: 47R1/RSN firmware_patches/hp/cpu/PF_CV220804 :V2200:V2250:4.2.1:icache parity:optical: 1Liner: HP V22x0 Test Station SW Patch CDate: 98/08/04 PDate: 98/08/12 Desc: Memory deallocation for double-bit memory errors and prevention of panics caused by icache parity errors seen on HP-UX prior to the April 1998 HP-UX 11.00 Extension Pack (9804). Recognition of optical disks by spp-pdc. SR: None DTS: None HWDep: V2200/V2250 SWDep: V-Class Test Station SW V4.2.1 Supers: None Owner: S300/CXD firmware_patches/hp/cpu/PF_CV220814 :V2200:V2250:4.2.1:icache parity:optical: 1Liner: HP V22x0 Test Station SW Patch CDate: 98/08/04 PDate: 98/08/14 Desc: Memory deallocation for double-bit memory errors and prevention of panics caused by icache parity errors seen on HP-UX prior to the April 1998 HP-UX 11.00 Extension Pack (9804). Recognition of optical disks by spp-pdc. SR: None DTS: None HWDep: V2200/V2250 SWDep: V-Class Test Station SW V4.2.1 Supers: PF_CV220804 Owner: S300/CXD firmware_patches/hp/cpu/PF_CV250111 :V2500:1.1.1:disable_row: 1Liner: HP V2500 revision 1.1.1 firmware patch CDate: 99/06/08 PDate: 99/06/23 Desc: Makes corrections to the disable_row file SR: None DTS: None HWDep: V2500 SWDep: Stingray Diagnostic Version 1.1 or 1.0 Supers: None Owner: 47R1/RSN firmware_patches/hp/cpu/PF_CV250112 :V-2500:1.1.2:OBP,Hard_logger: 1Liner: HP V-2500 revision 1.1.2 firmware patch CDate: 99/09/14 PDate: 99/09/17 Repost: 99/10/26 Desc: Added support for OBP, ENTRY, and HARD_LOGGER. SR: None DTS: None HWDep: V-2500 SWDep: Offline Test Station Diagnostics Version 1.1 Supers: PF_CV250111 Owner: 47R1/RSN firmware_patches/hp/cpu/PF_CV251014 :V2500:1.1.3 conserver: 1Liner: HP V2500 conserver 1.1.3 teststation patch CDate: 99/09/23 PDate: 99/10/26 Desc: Conserver change to fix console malfunction. SR: None DTS: None HWDep: V2500 SWDep: Offline Test Station Diagnostics Versions 1.0 or 1.1. Supers: None Owner: 47R1/RSN firmware_patches/hp/cpu/PF_CV260302 :V2500:V2600:3.0.2:post.fw:update_node:ts.install:fw_init:diag_version:opie.1m:tc_ioutil.1:dfdutil.1m: 1Liner: HP V2500/V2600 SCA Test Station Patch CDate: 00/04/03 PDate: 00/08/28 Desc: Enhanced sca post.fw, update_node, fw_init, ts.install, man pages and diag_version. SR: None DTS: None HWDep: V2500/V2600 SWDep: TSSW Diagnostic Version 3.0 Supers: None Owner: 47R1/RSN firmware_patches/hp/cpu/PF_CV260720 :V2500:V2600:pciromldr.fw: 1Liner: HP V2500/V2600 Test Station Patch CDate: 00/07/25 PDate: 00/08/28 Desc: pciromldr.fw will recognize new rom CAT28F512 on scsi cards. SR: None DTS: None HWDep: V2500/V2600 SWDep: TSSW for V2500/2600 diagnostic versions 3.0, 3.0.2 or 3.1. Supers: None Owner: 47R1/RSN firmware_patches/hp/cpu/PF_CWBR0013 :firmware:PDC 1.3: 1Liner: HP9000 Model E25/E35/E45 PDC revision 1.3 CDate: 95/03/24 PDate: 95/07/17 Desc: PDC revision 1.3 for HP9000 E25/E35/E45 and HP3000 918/928/968 systems. Desc: The latest versions of the offline diagnostic "MAPPER" will not execute properly if the systems described bove do not contain PDC revision 1.3 or greater. SR: 5003242784 DTS: None HWDep: HP9000 Model E25/E35/E45 and HP3000 918/928/968 Supers: None firmware_patches/hp/cpu/PF_CJ200018 :J-Series:J200:J210: 1Liner: HP 9000 Model J2X0 revision 1.8 firmware patch CDate: 95/09/29 PDate: 96/03/25 Desc: Adds Secure Mode. SR: None HWDep: 9000/J2X0 HPOnly: Some systems with a serial number less than US65350001 may experienceperformance problems. If so, call 1-800-987-0063 in the US and Canada or your local Country Response Center. Supers: None Owner: 40RG/SDT firmware_patches/hp/cpu/PF_CJ2X0019 :J-Series:J200:J210: 1Liner: HP 9000 Model J2X0 revision 1.9 firmware patch CDate: 96/05/22 PDate: 96/06/06 Desc: Adds support for 64mbyte module (2-32mbyte DIMMS) and 256mbyte module (2-128mbyte DIMMS). SR: None HWDep: 9000/J2X0 Supers: PF_CJ200018 Owner: 40RG/SDT firmware_patches/hp/cpu/PF_CULT3612 :Dx50:PDC 36.12: 1Liner: HP 9000 Model Dx50 PDC Revision 36.12 CDate: 96/03/29 PDate: 96/04/17 Desc: HP 9000 Model Dx50 PDC Revision 36.12 SR: None DTS: None HWDep: HP9000 Dx50 Supers: None firmware_patches/hp/cpu/PF_CULT3620 :Dx50:Dx60:PDC:36.20: 1Liner: HP 9000 Dx50/Dx60 PDC revision 36.20 CDate: 96/06/01 PDate: 96/06/06 Desc: - Adds support of 256MB Memory Modules - Adds support of 64MB Memory Modules - Adds support of HP9000 Dx60 systems - Provides PDCINFO functionality SR: None DTS: None HWDep: HP9000 Dx50/Dx60 Supers: PF_CULT3612 firmware_patches/hp/cpu/PF_CULT3634 :firmware:36.34: 1Liner: HP 9000 Dx50/Dx60 Firmware revision 36.34 CDate: 96/09/16 PDate: 96/09/30 Desc: Adds support of new LANID prefix. The current prefix "080009", has no new numbers left in its range. The new prefix is "0060B0". SR: None DTS: None HWDep: HP 9000 Dx50/Dx60 Supers: PF_CULT3612 PF_CULT3620 firmware_patches/hp/cpu/PF_CULL3612 :D200:D210:D310:PDC:36.12: 1Liner: HP 9000 Models D200/D210/D310 PDC revision 36.12 CDate: 96/03/29 PDate: 96/06/06 Desc: - Adds support of 64MB Memory Modules. - Model number for a D210 is properly displayed in the display panel. - When a 100VG card is installed in the system, and a /etc/reboot command is issued, selftest may fail with a FLT 10D1 or FLT 7000. SR: None DTS: None HWDep: HP9000 D200/D210/D310 Supers: None firmware_patches/hp/cpu/PF_CULL3634 :D200:D210:D310:PDC:36.34: 1Liner: HP 9000 Models D200/D210/D310 firmware revision 36.34 CDate: 96/09/16 PDate: 96/09/30 Desc: - Adds support of new LANID prefix. The current prefix, "080009", has no new numbers left in its range. The new prefix is "0060B0". - When a 100VG card is installed in the system, and no Access Port (AP) is installed, selftest may fail with FLT 10D1 or FLT 7000 after a /etc/reboot command is issued. SR: None DTS: None HWDep: HP9000 D200/D210/D310 Supers: PF_CULL3612 firmware_patches/hp/cpu/PF_CMHK3651 :firmware :PDC 36.51: 1Liner: HP 9000 Models KX50/60 PDC revision 36.51 CDate: 97/02/03 PDate: 97/02/04 Desc: This patch is a PDC FIRMWARE update for the HP9000 Models KX50/KX60, and the HP3000 979KS/X00 systems. FIRMWARE revision 36.51 adds the following enhancements and featurs: - Fixes Transfer of Control (TOC) Processor deconfiguration problem - Fixes Page Deallocation Table (PDT) error reporting problems. - Fixes an intermittent Tag queue overflow problem. - Clears the display panel messages "PRI BOOT" or "RENDEZ" when exiting the Boot Console Handler (BCH). SR: None DTS: None HWDep: HP 9000 KX50/KX60 and HP 3000 979KS/X00 only Supers: None Owner: ?